presentation layer functions and protocols

Presentation Layer: Protocols, Examples, Services | Functions of Presentation Layer

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts. Now, we will explain about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. At the end of this article, you will completely educate about What is Presentation Layer in OSI Model without any hassle.

• What is Presentation Layer?

Definition : Presentation layer is 6th layer in the OSI model , and its main objective is to present all messages to upper layer as a standardized format. It is also known as the “ Translation layer “.  This layer takes care of syntax and semantics of messages exchanged in between two communication systems. Presentation layer has responsible that receiver can understand all data, and it will be to implement all data languages can be dissimilar of two communication system.

Presentation layer is capable to handle abstract data structures, and further it helps to defined and exchange of higher-level data structures.

Presentation Layer Tutorial Headlines:

In this section, we will show you all headlines about this entire article; you can check them as your choice; below shown all:

• Functions of Presentation Layer

Protocols of Presentation Layer

• Example of Presentation Layer Protocols

Presentation Layer Services

Design issues with presentation layer, faqs (frequently asked questions), what is meant by presentation layer in osi model, what protocols are used in the presentation layer, can you explain some presentation layer examples, what are the main functions of the presentation layer, what are services of presentation layer in osi, let’s get started,   functions of presentation layer.

Presentation layer performs various functions in the OSI model ; below explain each one – 

• Presentation layer helps to translate from American standard code for information interchange (ASCII) to the extended binary code decimal interchange code (EBCDIC).
• It deals with user interface as well as supporting for several services such as email and file transfer.
• It provides encoding mechanism for translating all messages from user dependent format with common format and vice – versa.
• It’s main goal for data encryption and decryption of entire data before they are getting transmission over all common platforms.
• It provides data compression mechanism for source point to decrease the all bits which are transmitted. Due to this data compression system, user are able to transmit enlarge multimedia file at fastest file transfer rate.
• Due to use of Data Encryption and Decryption algorithm, presentation layer provides more network protection and confidentiality while transmission data over the entire network.
• This layer offers best flexibility for data translation for making connections with various kinds of servers , computers, and mainframes over the similar network.
• Presentation layer has responsible to fix all translations in between all network systems .

Presentation layer is used various protocols; below list is available –

• Multipurpose Internet Mail Extensions
• File Transfer Protocol
• Network News Transfer Protocol
• Apple Filing Protocol (AFP)
• Independent Computing Architecture (ICA), the Citrix system core protocol
• Lightweight Presentation Protocol (LPP)
• NetWare Core Protocol (NCP)
• Network Data Representation (NDR)
• Telnet (a remote terminal access protocol)
• Tox Protocol
• eXternal Data Representation (XDR)
• 25 Packet Assembler/Disassembler Protocol (PAD)

Example of Presentation Layer Protocols:

Here, we will discuss all examples of presentation layer protocols; below explain each one –  

Multipurpose Internet Mail Extensions (MIME) : MIME protocol was introduced by Bell Communications in 1991, and it is an internet standard that provides scalable capable of email for attaching of images, sounds and text in a message.

File Transfer Protocol (FTP) : FTP is a internet protocol, and its main goal is to transmit all files in between one host to other hosts over the internet on TCP/IP connections.

Network News Transfer Protocol (NNTP) : This protocol is used to make connection with Usenet server and transmit all newsgroup articles in between system over internet.

Apple Filing Protocol (AFP ) : AFP protocol is designed by Apple company for sharing all files over the entire network .

Lightweight Presentation Protocol (LPP) : This protocol is used to offer ISO presentation services on top of TCP/IP based protocol stacks.

NetWare Core Protocol (NCP) : NCP is a Novell client server model protocol that is designed especially for Local Area Network (LAN). It is capable to perform several functions like as file/print-sharing, clock synchronization, remote processing and messaging.

Network Data Representation (NDR) : NDR is an data encoding standard, and it is implement in the Distributed Computing Environment (DCE).

Telnet (Telecommunication Network) : Telnet protocol was introduced in 1969, and it offers the command line interface for making communication along with remote device or server .

Tox : The Tox protocol is sometimes regarded as part of both the presentation and application layer , and it is used for sending peer-to-peer instant-messaging as well as video calling.

eXternal Data Representation (XDR) : This protocol provides the description and encoding of entire data, and  it’s main goal is to transfer data in between dissimilar computer architecture.

25 Packet Assembler/Disassembler Protocol (PAD) : Main objective of this protocol is to obtain all data from group of terminal and allots the data into X. 25 packets.

Presentation layer provides several services like as –

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption
• It helps to handle and maintain Syntax and Semantics of the message transmitted.
• Encoding data can be done as standard agreed like as String, double, date, and more.
• Standard Encoding can be done on wire.

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model that is the lowest layer, where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts.

Presentation layer is used various protocols like as:

Yes! In this article, already we have been explained many examples of presentation layer; you can check them.

Presentation layer has a responsibility for formatting, translation, and delivery of the information for getting to process otherwise display .

Now, i hope that you have completely learnt about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. If this post is useful for you, then please share it along with your friends, family members or relatives over social media platforms like as Facebook, Instagram, Linked In, Twitter, and more.

Also Read: Data Link Layer: Protocols, Examples | Functions of Data Link Layer

If you have any experience, tips, tricks, or query regarding this issue? You can drop a comment!

Related Posts

  Layer 6 Presentation Layer

De/Encryption, Encoding, String representation

The presentation layer (data presentation layer, data provision level) sets the system-dependent representation of the data (for example, ASCII, EBCDIC) into an independent form, enabling the syntactically correct data exchange between different systems. Also, functions such as data compression and encryption are guaranteed that data to be sent by the application layer of a system that can be read by the application layer of another system to the layer 6. The presentation layer. If necessary, the presentation layer acts as a translator between different data formats, by making an understandable for both systems data format, the ASN.1 (Abstract Syntax Notation One) used.

OSI Layer 6 - Presentation Layer

The presentation layer is responsible for the delivery and formatting of information to the application layer for further processing or display. It relieves the application layer of concern regarding syntactical differences in data representation within the end-user systems. An example of a presentation service would be the conversion of an EBCDIC-coded text computer file to an ASCII-coded file. The presentation layer is the lowest layer at which application programmers consider data structure and presentation, instead of simply sending data in the form of datagrams or packets between hosts. This layer deals with issues of string representation - whether they use the Pascal method (an integer length field followed by the specified amount of bytes) or the C/C++ method (null-terminated strings, e.g. "thisisastring\0"). The idea is that the application layer should be able to point at the data to be moved, and the presentation layer will deal with the rest. Serialization of complex data structures into flat byte-strings (using mechanisms such as TLV or XML) can be thought of as the key functionality of the presentation layer. Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.[1] Another example is representing structure, which is normally standardized at this level, often by using XML. As well as simple pieces of data, like strings, more complicated things are standardized in this layer. Two common examples are 'objects' in object-oriented programming, and the exact way that streaming video is transmitted. In many widely used applications and protocols, no distinction is made between the presentation and application layers. For example, HyperText Transfer Protocol (HTTP), generally regarded as an application-layer protocol, has presentation-layer aspects such as the ability to identify character encoding for proper conversion, which is then done in the application layer. Within the service layering semantics of the OSI network architecture, the presentation layer responds to service requests from the application layer and issues service requests to the session layer. In the OSI model: the presentation layer ensures the information that the application layer of one system sends out is readable by the application layer of another system. For example, a PC program communicates with another computer, one using extended binary coded decimal interchange code (EBCDIC) and the other using ASCII to represent the same characters. If necessary, the presentation layer might be able to translate between multiple data formats by using a common format. Wikipedia

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption

The Presentation OSI Layer is usually composed of 2 sublayers that are:

CASE common application service element

Sase specific application service element, layer 7   application layer, layer 6   presentation layer, layer 5   session layer, layer 4   transport layer, layer 3   network layer, layer 2   data link layer, layer 1   physical layer.

The OSI Model – The 7 Layers of Networking Explained in Plain English

This article explains the Open Systems Interconnection (OSI) model and the 7 layers of networking, in plain English.

The OSI model is a conceptual framework that is used to describe how a network functions. In plain English, the OSI model helped standardize the way computer systems send information to each other.

Learning networking is a bit like learning a language - there are lots of standards and then some exceptions. Therefore, it’s important to really understand that the OSI model is not a set of rules. It is a tool for understanding how networks function.

Once you learn the OSI model, you will be able to further understand and appreciate this glorious entity we call the Internet, as well as be able to troubleshoot networking issues with greater fluency and ease.

All hail the Internet!

Prerequisites

You don’t need any prior programming or networking experience to understand this article. However, you will need:

• Basic familiarity with common networking terms (explained below)
• A curiosity about how things work :)

Learning Objectives

Over the course of this article, you will learn:

• What the OSI model is
• The purpose of each of the 7 layers
• The problems that can happen at each of the 7 layers
• The difference between TCP/IP model and the OSI model

Common Networking Terms

Here are some common networking terms that you should be familiar with to get the most out of this article. I’ll use these terms when I talk about OSI layers next.

A node is a physical electronic device hooked up to a network, for example a computer, printer, router, and so on. If set up properly, a node is capable of sending and/or receiving information over a network.

Nodes may be set up adjacent to one other, wherein Node A can connect directly to Node B, or there may be an intermediate node, like a switch or a router, set up between Node A and Node B.

Typically, routers connect networks to the Internet and switches operate within a network to facilitate intra-network communication. Learn more about hub vs. switch vs. router.

Here's an example:

For the nitpicky among us (yep, I see you), host is another term that you will encounter in networking. I will define a host as a type of node that requires an IP address. All hosts are nodes, but not all nodes are hosts. Please Tweet angrily at me if you disagree.

Links connect nodes on a network. Links can be wired, like Ethernet, or cable-free, like WiFi.

Links to can either be point-to-point, where Node A is connected to Node B, or multipoint, where Node A is connected to Node B and Node C.

When we’re talking about information being transmitted, this may also be described as a one-to-one vs. a one-to-many relationship.

A protocol is a mutually agreed upon set of rules that allows two nodes on a network to exchange data.

“A protocol defines the rules governing the syntax (what can be communicated), semantics (how it can be communicated), and synchronization (when and at what speed it can be communicated) of the communications procedure. Protocols can be implemented on hardware, software, or a combination of both. Protocols can be created by anyone, but the most widely adopted protocols are based on standards.” - The Illustrated Network.

Both wired and cable-free links can have protocols.

While anyone can create a protocol, the most widely adopted protocols are often based on standards published by Internet organizations such as the Internet Engineering Task Force (IETF).

A network is a general term for a group of computers, printers, or any other device that wants to share data.

Network types include LAN, HAN, CAN, MAN, WAN, BAN, or VPN. Think I’m just randomly rhyming things with the word can ? I can ’t say I am - these are all real network types. Learn more here .

Topology describes how nodes and links fit together in a network configuration, often depicted in a diagram. Here are some common network topology types:

A network consists of nodes, links between nodes, and protocols that govern data transmission between nodes.

At whatever scale and complexity networks get to, you will understand what’s happening in all computer networks by learning the OSI model and 7 layers of networking.

What is the OSI Model?

The OSI model consists of 7 layers of networking.

First, what’s a layer?

No, a layer - not a lair . Here there are no dragons.

A layer is a way of categorizing and grouping functionality and behavior on and of a network.

In the OSI model, layers are organized from the most tangible and most physical, to less tangible and less physical but closer to the end user.

Each layer abstracts lower level functionality away until by the time you get to the highest layer. All the details and inner workings of all the other layers are hidden from the end user.

How to remember all the names of the layers? Easy.

• Please | Physical Layer
• Do | Data Link Layer
• Not | Network Layer
• Tell (the) | Transport Layer
• Secret | Session Layer
• Password (to) | Presentation Layer
• Anyone | Application Layer

Keep in mind that while certain technologies, like protocols, may logically “belong to” one layer more than another, not all technologies fit neatly into a single layer in the OSI model. For example, Ethernet, 802.11 (Wifi) and the Address Resolution Protocol (ARP) procedure operate on >1 layer.

The OSI is a model and a tool, not a set of rules.

OSI Layer 1

Layer 1 is the physical layer . There’s a lot of technology in Layer 1 - everything from physical network devices, cabling, to how the cables hook up to the devices. Plus if we don’t need cables, what the signal type and transmission methods are (for example, wireless broadband).

Instead of listing every type of technology in Layer 1, I’ve created broader categories for these technologies. I encourage readers to learn more about each of these categories:

• Nodes (devices) and networking hardware components. Devices include hubs, repeaters, routers, computers, printers, and so on. Hardware components that live inside of these devices include antennas, amplifiers, Network Interface Cards (NICs), and more.
• Device interface mechanics. How and where does a cable connect to a device (cable connector and device socket)? What is the size and shape of the connector, and how many pins does it have? What dictates when a pin is active or inactive?
• Functional and procedural logic. What is the function of each pin in the connector - send or receive? What procedural logic dictates the sequence of events so a node can start to communicate with another node on Layer 2?
• Cabling protocols and specifications. Ethernet (CAT), USB, Digital Subscriber Line (DSL) , and more. Specifications include maximum cable length, modulation techniques, radio specifications, line coding, and bits synchronization (more on that below).
• Cable types. Options include shielded or unshielded twisted pair, untwisted pair, coaxial and so on. Learn more about cable types here .
• Signal type. Baseband is a single bit stream at a time, like a railway track - one-way only. Broadband consists of multiple bit streams at the same time, like a bi-directional highway.
• Signal transmission method (may be wired or cable-free). Options include electrical (Ethernet), light (optical networks, fiber optics), radio waves (802.11 WiFi, a/b/g/n/ac/ax variants or Bluetooth). If cable-free, then also consider frequency: 2.5 GHz vs. 5 GHz. If it’s cabled, consider voltage. If cabled and Ethernet, also consider networking standards like 100BASE-T and related standards.

The data unit on Layer 1 is the bit.

A bit the smallest unit of transmittable digital information. Bits are binary, so either a 0 or a 1. Bytes, consisting of 8 bits, are used to represent single characters, like a letter, numeral, or symbol.

Bits are sent to and from hardware devices in accordance with the supported data rate (transmission rate, in number of bits per second or millisecond) and are synchronized so the number of bits sent and received per unit of time remains consistent (this is called bit synchronization). The way bits are transmitted depends on the signal transmission method.

Nodes can send, receive, or send and receive bits. If they can only do one, then the node uses a simplex mode. If they can do both, then the node uses a duplex mode. If a node can send and receive at the same time, it’s full-duplex – if not, it’s just half-duplex.

The original Ethernet was half-duplex. Full-duplex Ethernet is an option now, given the right equipment.

How to Troubleshoot OSI Layer 1 Problems

Here are some Layer 1 problems to watch out for:

• Defunct cables, for example damaged wires or broken connectors
• Broken hardware network devices, for example damaged circuits
• Stuff being unplugged (...we’ve all been there)

If there are issues in Layer 1, anything beyond Layer 1 will not function properly.

Layer 1 contains the infrastructure that makes communication on networks possible.

It defines the electrical, mechanical, procedural, and functional specifications for activating, maintaining, and deactivating physical links between network devices. - Source

Fun fact: deep-sea communications cables transmit data around the world. This map will blow your mind: https://www.submarinecablemap.com/

And because you made it this far, here’s a koala:

OSI Layer 2

Layer 2 is the data link layer . Layer 2 defines how data is formatted for transmission, how much data can flow between nodes, for how long, and what to do when errors are detected in this flow.

In more official tech terms:

• Line discipline. Who should talk for how long? How long should nodes be able to transit information for?
• Flow control. How much data should be transmitted?
• Error control - detection and correction . All data transmission methods have potential for errors, from electrical spikes to dirty connectors. Once Layer 2 technologies tell network administrators about an issue on Layer 2 or Layer 1, the system administrator can correct for those errors on subsequent layers. Layer 2 is mostly concerned with error detection, not error correction. ( Source )

There are two distinct sublayers within Layer 2:

• Media Access Control (MAC): the MAC sublayer handles the assignment of a hardware identification number, called a MAC address, that uniquely identifies each device on a network. No two devices should have the same MAC address. The MAC address is assigned at the point of manufacturing. It is automatically recognized by most networks. MAC addresses live on Network Interface Cards (NICs). Switches keep track of all MAC addresses on a network. Learn more about MAC addresses on PC Mag and in this article . Learn more about network switches here .
• Logical Link Control (LLC): the LLC sublayer handles framing addressing and flow control. The speed depends on the link between nodes, for example Ethernet or Wifi.

The data unit on Layer 2 is a frame .

Each frame contains a frame header, body, and a frame trailer:

• Header: typically includes MAC addresses for the source and destination nodes.
• Body: consists of the bits being transmitted.
• Trailer: includes error detection information. When errors are detected, and depending on the implementation or configuration of a network or protocol, frames may be discarded or the error may be reported up to higher layers for further error correction. Examples of error detection mechanisms: Cyclic Redundancy Check (CRC) and Frame Check Sequence (FCS). Learn more about error detection techniques here .

Typically there is a maximum frame size limit, called an Maximum Transmission Unit, MTU. Jumbo frames exceed the standard MTU, learn more about jumbo frames here .

How to Troubleshoot OSI Layer 2 Problems

Here are some Layer 2 problems to watch out for:

• All the problems that can occur on Layer 1
• Unsuccessful connections (sessions) between two nodes
• Sessions that are successfully established but intermittently fail
• Frame collisions

The Data Link Layer allows nodes to communicate with each other within a local area network. The foundations of line discipline, flow control, and error control are established in this layer.

OSI Layer 3

Layer 3 is the network layer . This is where we send information between and across networks through the use of routers. Instead of just node-to-node communication, we can now do network-to-network communication.

Routers are the workhorse of Layer 3 - we couldn’t have Layer 3 without them. They move data packets across multiple networks.

Not only do they connect to Internet Service Providers (ISPs) to provide access to the Internet, they also keep track of what’s on its network (remember that switches keep track of all MAC addresses on a network), what other networks it’s connected to, and the different paths for routing data packets across these networks.

Routers store all of this addressing and routing information in routing tables.

Here’s a simple example of a routing table:

The data unit on Layer 3 is the data packet . Typically, each data packet contains a frame plus an IP address information wrapper. In other words, frames are encapsulated by Layer 3 addressing information.

The data being transmitted in a packet is also sometimes called the payload . While each packet has everything it needs to get to its destination, whether or not it makes it there is another story.

Layer 3 transmissions are connectionless, or best effort - they don't do anything but send the traffic where it’s supposed to go. More on data transport protocols on Layer 4.

Once a node is connected to the Internet, it is assigned an Internet Protocol (IP) address, which looks either like 172.16. 254.1 (IPv4 address convention) or like 2001:0db8:85a3:0000:0000:8a2e:0370:7334 (IPv6 address convention). Routers use IP addresses in their routing tables.

IP addresses are associated with the physical node’s MAC address via the Address Resolution Protocol (ARP), which resolves MAC addresses with the node’s corresponding IP address.

ARP is conventionally considered part of Layer 2, but since IP addresses don’t exist until Layer 3, it’s also part of Layer 3.

How to Troubleshoot OSI Layer 3 Problems

Here are some Layer 3 problems to watch out for:

• All the problems that can crop up on previous layers :)
• Faulty or non-functional router or other node
• IP address is incorrectly configured

Many answers to Layer 3 questions will require the use of command-line tools like ping , trace , show ip route , or show ip protocols . Learn more about troubleshooting on layer 1-3 here .

The Network Layer allows nodes to connect to the Internet and send information across different networks.

OSI Layer 4

Layer 4 is the transport layer . This where we dive into the nitty gritty specifics of the connection between two nodes and how information is transmitted between them. It builds on the functions of Layer 2 - line discipline, flow control, and error control.

This layer is also responsible for data packet segmentation, or how data packets are broken up and sent over the network.

Unlike the previous layer, Layer 4 also has an understanding of the whole message, not just the contents of each individual data packet. With this understanding, Layer 4 is able to manage network congestion by not sending all the packets at once.

The data units of Layer 4 go by a few names. For TCP, the data unit is a packet. For UDP, a packet is referred to as a datagram. I’ll just use the term data packet here for the sake of simplicity.

Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) are two of the most well-known protocols in Layer 4.

TCP, a connection-oriented protocol, prioritizes data quality over speed.

TCP explicitly establishes a connection with the destination node and requires a handshake between the source and destination nodes when data is transmitted. The handshake confirms that data was received. If the destination node does not receive all of the data, TCP will ask for a retry.

TCP also ensures that packets are delivered or reassembled in the correct order. Learn more about TCP here .

UDP, a connectionless protocol, prioritizes speed over data quality. UDP does not require a handshake, which is why it’s called connectionless.

Because UDP doesn’t have to wait for this acknowledgement, it can send data at a faster rate, but not all of the data may be successfully transmitted and we’d never know.

If information is split up into multiple datagrams, unless those datagrams contain a sequence number, UDP does not ensure that packets are reassembled in the correct order. Learn more about UDP here .

TCP and UDP both send data to specific ports on a network device, which has an IP address. The combination of the IP address and the port number is called a socket.

Learn more about sockets here .

Learn more about the differences and similarities between these two protocols here .

How to Troubleshoot OSI Layer 4 Problems

Here are some Layer 4 problems to watch out for:

• Blocked ports - check your Access Control Lists (ACL) & firewalls
• Quality of Service (QoS) settings. QoS is a feature of routers/switches that can prioritize traffic, and they can really muck things up. Learn more about QoS here .

The Transport Layer provides end-to-end transmission of a message by segmenting a message into multiple data packets; the layer supports connection-oriented and connectionless communication.

OSI Layer 5

Layer 5 is the session layer . This layer establishes, maintains, and terminates sessions.

A session is a mutually agreed upon connection that is established between two network applications. Not two nodes! Nope, we’ve moved on from nodes. They were so Layer 4.

Just kidding, we still have nodes, but Layer 5 doesn’t need to retain the concept of a node because that’s been abstracted out (taken care of) by previous layers.

So a session is a connection that is established between two specific end-user applications. There are two important concepts to consider here:

• Client and server model: the application requesting the information is called the client, and the application that has the requested information is called the server.
• Request and response model: while a session is being established and during a session, there is a constant back-and-forth of requests for information and responses containing that information or “hey, I don’t have what you’re requesting.”

Sessions may be open for a very short amount of time or a long amount of time. They may fail sometimes, too.

Depending on the protocol in question, various failure resolution processes may kick in. Depending on the applications/protocols/hardware in use, sessions may support simplex, half-duplex, or full-duplex modes.

Examples of protocols on Layer 5 include Network Basic Input Output System (NetBIOS) and Remote Procedure Call Protocol (RPC), and many others.

From here on out (layer 5 and up), networks are focused on ways of making connections to end-user applications and displaying data to the user.

How to Troubleshoot OSI Layer 5 Problems

Here are some Layer 5 problems to watch out for:

• Servers are unavailable
• Servers are incorrectly configured, for example Apache or PHP configs
• Session failure - disconnect, timeout, and so on.

The Session Layer initiates, maintains, and terminates connections between two end-user applications. It responds to requests from the presentation layer and issues requests to the transport layer.

OSI Layer 6

Layer 6 is the presentation layer . This layer is responsible for data formatting, such as character encoding and conversions, and data encryption.

The operating system that hosts the end-user application is typically involved in Layer 6 processes. This functionality is not always implemented in a network protocol.

Layer 6 makes sure that end-user applications operating on Layer 7 can successfully consume data and, of course, eventually display it.

There are three data formatting methods to be aware of:

• American Standard Code for Information Interchange (ASCII): this 7-bit encoding technique is the most widely used standard for character encoding. One superset is ISO-8859-1, which provides most of the characters necessary for languages spoken in Western Europe.
• Extended Binary-Coded Decimal Interchange Code (EBDCIC): designed by IBM for mainframe usage. This encoding is incompatible with other character encoding methods.
• Unicode: character encodings can be done with 32-, 16-, or 8-bit characters and attempts to accommodate every known, written alphabet.

Learn more about character encoding methods in this article , and also here .

Encryption: SSL or TLS encryption protocols live on Layer 6. These encryption protocols help ensure that transmitted data is less vulnerable to malicious actors by providing authentication and data encryption for nodes operating on a network. TLS is the successor to SSL.

How to Troubleshoot OSI Layer 6 Problems

Here are some Layer 6 problems to watch out for:

• Non-existent or corrupted drivers
• Incorrect OS user access level

The Presentation Layer formats and encrypts data.

OSI Layer 7

Layer 7 is the application layer .

True to its name, this is the layer that is ultimately responsible for supporting services used by end-user applications. Applications include software programs that are installed on the operating system, like Internet browsers (for example, Firefox) or word processing programs (for example, Microsoft Word).

Applications can perform specialized network functions under the hood and require specialized services that fall under the umbrella of Layer 7.

Electronic mail programs, for example, are specifically created to run over a network and utilize networking functionality, such as email protocols, which fall under Layer 7.

Applications will also control end-user interaction, such as security checks (for example, MFA), identification of two participants, initiation of an exchange of information, and so on.

Protocols that operate on this level include File Transfer Protocol (FTP), Secure Shell (SSH), Simple Mail Transfer Protocol (SMTP), Internet Message Access Protocol (IMAP), Domain Name Service (DNS), and Hypertext Transfer Protocol (HTTP).

While each of these protocols serve different functions and operate differently, on a high level they all facilitate the communication of information. ( Source )

How to Troubleshoot OSI Layer 7 Problems

Here are some Layer 7 problems to watch out for:

• All issues on previous layers
• Incorrectly configured software applications
• User error (... we’ve all been there)

The Application Layer owns the services and functions that end-user applications need to work. It does not include the applications themselves.

Our Layer 1 koala is all grown up.

Learning check - can you apply makeup to a koala?

Don’t have a koala?

Well - answer these questions instead. It’s the next best thing, I promise.

• What is the OSI model?
• What are each of the layers?
• How could I use this information to troubleshoot networking issues?

Congratulations - you’ve taken one step farther to understanding the glorious entity we call the Internet.

Learning Resources

Many, very smart people have written entire books about the OSI model or entire books about specific layers. I encourage readers to check out any O’Reilly-published books about the subject or about network engineering in general.

Here are some resources I used when writing this article:

• The Illustrated Network, 2nd Edition
• Protocol Data Unit (PDU): https://www.geeksforgeeks.org/difference-between-segments-packets-and-frames/
• Troubleshooting Along the OSI Model: https://www.pearsonitcertification.com/articles/article.aspx?p=1730891
• The OSI Model Demystified: https://www.youtube.com/watch?v=HEEnLZV2wGI
• OSI Model for Dummies: https://www.dummies.com/programming/networking/layers-in-the-osi-model-of-a-computer-network/

Chloe Tucker is an artist and computer science enthusiast based in Portland, Oregon. As a former educator, she's continuously searching for the intersection of learning and teaching, or technology and art. Reach out to her on Twitter @_chloetucker and check out her website at chloe.dev .

Read more posts .

If you read this far, thank the author to show them you care. Say Thanks

Learn to code for free. freeCodeCamp's open source curriculum has helped more than 40,000 people get jobs as developers. Get started

Presentation layer and Session layer of the OSI model

There are two popular networking models: the OSI layers model and the TCP/IP layers model. The presentation layer and session layer exist only in the OSI layers models. The TCP/IP layers model merges them into the application layer.

The Presentation Layer

The presentation layer is the sixth layer of the OSI Reference model. It defines how data and information is transmitted and presented to the user. It translates data and format code in such a way that it is correctly used by the application layer.

It identifies the syntaxes that different applications use and formats data using those syntaxes. For example, a web browser receives a web page from a web server in the HTML language. HTML language includes many tags and markup that have no meaning for the end user but they have special meaning for the web browser. the web browser uses the presentation layer's logic to read those syntaxes and format data in such a way the web server wants it to be present to the user.

On the sender device, it encapsulates and compresses data before sending it to the network to increase the speed and security of the network. On the receiver device, it de-encapsulates and decompresses data before presenting it to the user.

Examples of the presentation layer

Example standards for representing graphical information: JPEG, GIF, JPEG, and TIFF.

Example standards for representing audio information: WAV, MIDI, MP3.

Example standards for representing video information: WMV, MOV, MP4, MPEG.

Example standards for representing text information: doc, xls, txt, pdf.

Functions of the presentation layer

• It formats and presents data and information.
• It encrypts and compresses data before giving it to the session layer.
• It de-encrypts and decompresses the encrypted and compressed data it receives from the session layer.

Session layer

The session layer is the fifth layer of the OSI layers model. It is responsible for initiating, establishing, managing, and terminating sessions between the local application and the remote applications.

It defines standards for three modes of communication: full duplex, half-duplex, and simplex.

In the full duplex mode, both devices can send and receive data simultaneously. The internet connection is an example of the full duplex mode.

In the half duplex mode, only one device can send data at a time. A telephone conversation is an example of the half-duplex mode.

In the simplex mode, only one device can send data. A radio broadcast is an example of the simplex mode.

Functions of the session layer

• It is responsible for terminating sessions, creating checkpoints, and recovering data when sessions are interrupted.
• It opens and maintains logical communication channels between network applications running on the local host and network applications running on the remote host.
• If a network application uses an authentication mechanism before it opens a logical communication channel (session) with the remote host, it handles the authentication process.

Examples of the session layer

Structure Query Language (SQL), Remote Procedure Call (RPC), and Network File System (NFS) are examples of the session layer.

By ComputerNetworkingNotes Updated on 2023-10-30 05:30:01 IST

ComputerNetworkingNotes CCNA Study Guide Presentation layer and Session layer of the OSI model

We do not accept any kind of Guest Post. Except Guest post submission, for any other query (such as adverting opportunity, product advertisement, feedback, suggestion, error reporting and technical issue) or simply just say to hello mail us [email protected]

Please Whitelist This Site? I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :) If you like The TCP/IP Guide, please consider the download version . It's priced very economically and you can read all of it in a convenient format without ads. If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK. Thanks for your understanding! Sincerely, Charles Kozierok Author and Publisher, The TCP/IP Guide

The presentation layer is the sixth layer of the OSI Reference Model protocol stack, and second from the top. It is different from the other layers in two key respects. First, it has a much more limited and specific function than the other layers; it's actually somewhat easy to describe, hurray! Second, it is used much less often than the other layers; in many types of connections it is not required.

The name of this layer suggests its main function as well: it deals with the presentation of data. More specifically, the presentation layer is charged with taking care of any issues that might arise where data sent from one system needs to be viewed in a different way by the other system. It also takes care of any special processing that must be done to data from the time an application tries to send it until the time it is sent over the network.

Here are some of the specific types of data handling issues that the presentation layer handles:

The reason that the presentation layer is not always used in network communications is that the jobs mentioned above are simply not always needed. Compression and encryption are usually considered “optional”, and translation features are also only needed in certain circumstances. Another reason why the presentation layer is sometimes not mentioned is that its functions may be performed as part of the application layer.

The fact that the translation job done by the presentation layer isn't always needed means that it is common for it to be “skipped” by actual protocol stack implementations. This means that protocols at layer seven may talk directly with those at layer five. Once again, this is part of the reason why all of the functions of layers five through seven may be included together in the same software package, as described in the overview of layers and layer groupings .

• Data Structure
• Coding Problems
• C Interview Programs
• C++ Aptitude
• Java Aptitude
• C# Aptitude
• PHP Aptitude
• Linux Aptitude
• DBMS Aptitude
• Networking Aptitude
• AI Aptitude
• MIS Executive
• Web Technologie MCQs
• CS Subjects MCQs
• Databases MCQs
• Programming MCQs
• Testing Software MCQs
• Digital Mktg Subjects MCQs
• Cloud Computing S/W MCQs
• Engineering Subjects MCQs
• Commerce MCQs
• More MCQs...
• Machine Learning/AI
• Operating System
• Computer Network
• Software Engineering
• Discrete Mathematics
• Digital Electronics
• Data Mining
• Embedded Systems
• Cryptography
• CS Fundamental
• More Tutorials...
• Tech Articles
• Code Examples
• Programmer's Calculator
• XML Sitemap Generator
• Tools & Generators

Home » Computer Network

Presentation Layer: What It Is, Design Issues, Functionalities

Description and Functions of Presentation Layer in the OSI model: In this tutorial, we are going to learn what the Presentation layer is and the Functions of the Presentation Layer in the OSI model in Computer Networking. We will also discuss the Design issues with the Presentation Layer and the working of the Presentation Layer with the help of its diagram. By Monika Jha Last updated : May 05, 2023

What is Presentation Layer?

The Presentation Layer is concerned with the syntax and semantics of the information exchanged between two communicating devices.

• The presentation layer takes care that the data is sent in that way the receiver of the data will understand the information (data) and will be able to use the data.
• Languages that are syntax can be different from the two communicating machines. In this condition, the presentation layer plays the role of translator between them.
• It is possible for two machines to communicate with different data representations, data structures to be exchanged can be defined in an abstract way.
• These abstract data structures will be managed by the presentation layer and this layer allows higher-level data structures (For example banking records), to be defined and exchanged.

This figure shows the relationship of the presentation layer to the session layer and application layer.

Design Issues with Presentation Layer

The following are the design issues with presentation layer:

• To manage and maintain the Syntax and Semantics of the information transmitted.
• Encoding data in a standard agreed-upon way just like a string, double, date, etc.
• It Performs Standard Encoding scheme on the wire.

Functionalities of the Presentation Layer

Specific functionalities of the presentation layer are as follows:

1. Translation

• The processes or running programs in two machines are usually exchanging the information in the form of numbers, character strings and so on before being transmitted. The information should be changed to bitstreams because different computers use different encoding schemes.
• The Presentation layer is responsible for compatibility between these encoding methods.
• The Presentation layer at the sender's side changes the information from its sender dependent format.
• The Presentation layer at the receiving machine changes the common format into its receivers dependent format.

Example: Convert ASCII code to EBCDIC code.

2. Encryption

• The system must be able to assure privacy regarding the message or information as it also carries sensitive information.
• Encryption means that the sender transforms the original information or message to another form, this data after encryption is known as the ciphertext and this ciphertext sends the resulting message out over the network.
• Decryption concerned with the transform of the message back to its original form. This decrypted data is known as plain text.

3. Compression

• Data Compression means reduces the number of bits to be transmitted by this reduce the bandwidth of the data.
• Data Compression becomes particularly important in the transmission of multimedia such as audio, video, text, etc.

Related Tutorials

• IPV4 Addressing | Classful and Classless Addressing
• Subnetting and Supernetting in Computer Network
• Network Address Translation (NAT) in Computer Network
• Fixed Length and Variable Length Subnet Mask (FLSM & VLSM)
• Line Configuration in Computer Network
• Transmission Modes in Computer Network
• Data Link Layer: What It Is, Sublayers, Design Issues, Functions
• Physical Layer: What It Is, Design Issues, Functions
• Network Layer: What It Is, Design Issues, Responsibilities
• Session Layer: What It Is, Design Issues, Functionalities
• Transport Layer: What It Is, Design Issues, Functions, and Example
• Optical Fiber (Fiber Optics) in Computer Network
• Unguided Transmission Media in Computer Network
• Virtual LAN (VLAN) in Computer Network
• Virtual Storage Area Networking (VSAN)

Comments and Discussions!

Load comments ↻

• Marketing MCQs
• Blockchain MCQs
• Artificial Intelligence MCQs
• Data Analytics & Visualization MCQs
• Python MCQs
• C++ Programs
• Python Programs
• Java Programs
• D.S. Programs
• Golang Programs
• C# Programs
• JavaScript Examples
• jQuery Examples
• CSS Examples
• C++ Tutorial
• Python Tutorial
• ML/AI Tutorial
• MIS Tutorial
• Software Engineering Tutorial
• Scala Tutorial
• Privacy policy
• Certificates
• Content Writers of the Month

Copyright © 2024 www.includehelp.com. All rights reserved.

PrepBytes Blog

ONE-STOP RESOURCE FOR EVERYTHING RELATED TO CODING

Sign in to your account

Forgot your password?

Login via OTP

We will send you an one time password on your mobile number

An OTP has been sent to your mobile number please verify it below

Register with PrepBytes

Presentation layer in osi model.

Last Updated on March 7, 2024 by Abhishek Sharma

The OSI (Open Systems Interconnection) model is a conceptual framework used to understand the functions of a telecommunication or computing system. It consists of seven layers, each responsible for specific tasks. The sixth layer, known as the Presentation Layer, plays a crucial role in ensuring that data exchanged between systems is readable and usable. Let’s explore the functions and importance of the Presentation Layer in the OSI model.

What is Presentation Layer in OSI Model?

The Presentation Layer, the sixth layer of the OSI (Open Systems Interconnection) model, is responsible for ensuring that data exchanged between systems is in a format that can be interpreted and used by the receiving system. It performs various functions, including data translation, encryption, compression, and formatting, to facilitate efficient and secure communication between networked devices.

Functions of the Presentation Layer

Below are some of the functions of the Presentation Layer in OSI Model:

• Data Translation: The Presentation Layer translates data from the format used by the application layer into a format that can be transmitted over the network. This includes encoding, compression, and encryption.
• Data Formatting: It ensures that data is formatted according to the specifications of the application layer. This includes converting between different character sets, such as ASCII and Unicode.
• Data Compression: The Presentation Layer compresses data to reduce the amount of bandwidth required for transmission, improving network efficiency.
• Data Encryption: It encrypts data to ensure that it remains secure during transmission, protecting it from unauthorized access.
• Data Syntax: The Presentation Layer defines the syntax for data representation, ensuring that both the sender and receiver understand the structure of the data being exchanged.

Importance of the Presentation Layer

Importance of Presentation Layer are:

• Data Integrity: By ensuring that data is formatted correctly and encrypted, the Presentation Layer helps maintain the integrity of data during transmission.
• Interoperability: The Presentation Layer enables different systems to communicate with each other by ensuring that data is translated into a common format that both systems understand.
• Efficiency: Data compression reduces the amount of data that needs to be transmitted, improving network efficiency and reducing bandwidth requirements.
• Security: Encryption provided by the Presentation Layer ensures that data remains secure and protected from unauthorized access.

Conclusion The Presentation Layer is a crucial component of the OSI model, responsible for ensuring that data exchanged between systems is in a format that can be understood and used. By performing functions such as data translation, formatting, compression, and encryption, the Presentation Layer plays a vital role in maintaining data integrity, facilitating interoperability, and ensuring the security of data during transmission.

FAQs related to Presentation Layer in OSI Model

Here are some of the FAQs related to Presentation Layer in OSI Model:

Q1: What is the role of the Presentation Layer in the OSI model? The Presentation Layer ensures that data exchanged between systems is in a usable format, performing functions such as data translation, encryption, compression, and formatting.

Q2: How does the Presentation Layer ensure data security? The Presentation Layer encrypts data before transmission, making it unreadable to unauthorized parties, thus ensuring data security.

Q3: Why is data compression important in the Presentation Layer? Data compression reduces the size of data packets, leading to faster transmission speeds and optimized bandwidth usage, which is crucial in high-traffic networks.

Q4: How does the Presentation Layer facilitate interoperability between systems? By translating data into a common format that both sender and receiver understand, the Presentation Layer enables different systems to communicate with each other seamlessly.

Q5: Can the Presentation Layer be bypassed in data transmission? While it is possible to bypass the Presentation Layer in some cases, doing so can lead to compatibility issues between systems and is not recommended.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Linked List
• Segment Tree
• Backtracking
• Dynamic Programming
• Greedy Algorithm
• Operating System
• Company Placement
• Interview Tips
• General Interview Questions
• Data Structure
• Other Topics
• Computational Geometry
• Game Theory

Related Post

Quantum cryptography, introduction to sniffers, multiplexing and demultiplexing in transport layer, transport layer responsibilities, tacacs+ and radius.

Computer Networks:

• basic of computer networks
• Difference between
• Network Topologies
• Transmission Techniques (simplex, 1/2 duplex, duplex)
• Physical Media(Guided /unguided)
• Hub, Repeater,

Presentation Layer

Presentation layer: The presentation layer is the six layer of the OSI reference model protocol stack, and second from the top. Which is different from the other layers in two respects.

 first it has a much more Limited and specific function then the other layers. It is actually some what easy to describe. 

Second it is used much less often then the other layers in many types of connection it is not required. Presentation layers deals with the semantic and syntax text of the data.

Presentation layer function:

1) translation:.

Network can connected to very different types of computer together like PCs, UNIX system, servers on the same network.

Data is sent from sender to receiver but what if the sender device and the receiver device understand different formats of code here’s the presentation layer comes in action, it translate the data to other format in which the receiver can understand.

2) Encryption And decryption:

Whenever data is being transmitted between the sender and the receiver, that data must be secure because an Intruder can hack the data passing between the sender and the receiver. 

The layer is liable for encoding (Encryption) and decoding(Decryption) information to keep away from information spillage and information change.

3) Compression And Decompression:

Protocols of presentation layer:, independent computing architecture (ica):.

It is a presentation layer Protocol in the OSI model which was formed by citrix system. It is used to transferring data from server to client.

Network data representation (NDR):

This protocol provides different kind of data representation such as image video audio number etc

Packet assembler/ Disassembler protocol (PAD):

It is a telecommunication equipment that split a stream of data into separate packet and format packets header for asynchronous communication. on X.25 network.

Lightweight presentation protocol (LPP ):

It is a protocol that offers ISO presentation services over TCP/IP base network

"Before you go, don't miss out on our exclusive limited-time offer! Get 20% off on our featured courses and supercharge your learning journey. Expand your knowledge, enhance your skills, and unlock new opportunities. Click here to seize this incredible deal now! Don't let this chance slip away!"

No thanks, I’m not interested!

• Engineering Mathematics
• Discrete Mathematics
• Operating System
• Computer Networks
• Digital Logic and Design
• C Programming
• Data Structures
• Theory of Computation
• Compiler Design
• Computer Org and Architecture
• Computer Network Tutorial

Basics of Computer Network

• Basics of Computer Networking
• Introduction to basic Networking Terminology
• Goals of Networks
• Basic characteristics of Computer Networks
• Challenges of Computer Network
• Physical Components of Computer Network

Network Hardware and Software

• Types of Computer Networks
• LAN Full Form
• How to Set Up a LAN Network?
• MAN Full Form in Computer Networking
• MAN Full Form
• WAN Full Form
• Introduction of Internetworking
• Difference between Internet, Intranet and Extranet
• Protocol Hierarchies in Computer Network
• Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)
• Introduction of a Router
• Introduction of Gateways
• What is a network switch, and how does it work?

Network Topology

• Types of Network Topology
• Difference between Physical and Logical Topology
• What is OSI Model? - Layers of OSI Model
• Physical Layer in OSI Model
• Data Link Layer

Session Layer in OSI model

• Presentation Layer in OSI model
• Application Layer in OSI Model
• Protocol and Standard in Computer Networks
• Examples of Data Link Layer Protocols
• TCP/IP Model
• TCP/IP Ports and Its Applications
• What is Transmission Control Protocol (TCP)?
• TCP 3-Way Handshake Process
• Services and Segment structure in TCP
• TCP Connection Establishment
• TCP Connection Termination
• Fast Recovery Technique For Loss Recovery in TCP
• Difference Between OSI Model and TCP/IP Model

Medium Access Control

• MAC Full Form
• Channel Allocation Problem in Computer Network
• Multiple Access Protocols in Computer Network
• Carrier Sense Multiple Access (CSMA)
• Collision Detection in CSMA/CD
• Controlled Access Protocols in Computer Network

SLIDING WINDOW PROTOCOLS

• Stop and Wait ARQ
• Sliding Window Protocol | Set 3 (Selective Repeat)
• Piggybacking in Computer Networks

IP Addressing

• What is IPv4?
• What is IPv6?
• Introduction of Classful IP Addressing
• Classless Addressing in IP Addressing
• Classful Vs Classless Addressing
• Classless Inter Domain Routing (CIDR)
• Supernetting in Network Layer
• Introduction To Subnetting
• Difference between Subnetting and Supernetting
• Types of Routing
• Difference between Static and Dynamic Routing
• Unicast Routing - Link State Routing
• Distance Vector Routing (DVR) Protocol
• Fixed and Flooding Routing algorithms
• Introduction of Firewall in Computer Network

Congestion Control Algorithms

• Congestion Control in Computer Networks
• Congestion Control techniques in Computer Networks
• Computer Network | Leaky bucket algorithm
• TCP Congestion Control

Network Switching

• Circuit Switching in Computer Network
• Message switching techniques
• Packet Switching and Delays in Computer Network
• Differences Between Virtual Circuits and Datagram Networks

Application Layer:DNS

• Domain Name System (DNS) in Application Layer
• Details on DNS
• Introduction to Electronic Mail
• E-Mail Format
• World Wide Web (WWW)
• HTTP Full Form
• Streaming Stored Video
• What is a Content Distribution Network and how does it work?

CN Interview Quetions

• Top 50 Networking Interview Questions (2024)
• Top 50 TCP/IP interview questions and answers
• Top 50 IP addressing interview questions and answers
• Last Minute Notes - Computer Networks
• Computer Network - Cheat Sheet
• Network Layer
• Transport Layer
• Application Layer

Prerequisite : OSI Layer

Introduction : The Session Layer is the 5th layer in the Open System Interconnection (OSI) model. This layer allows users on different machines to establish active communications sessions between them. It is responsible for establishing, maintaining, synchronizing, terminating sessions between end-user applications. In Session Layer, streams of data are received and further marked, which is then resynchronized properly, so that the ends of the messages are not cut initially and further data loss is avoided. This layer basically establishes a connection between the session entities. This layer handles and manipulates data which it receives from the Session Layer as well as from the Presentation Layer.

Working of Session Layer : Session Layer, which is the 5th layer in the OSI model, uses the services provided by The transport layer, enables applications to establish and maintain sessions and to synchronize the sessions.  Now, in order to establish a session connection, several things should be followed.

First thing is we should map the session address to the shipping address. The second thing is that we need to select the required transport quality of service (also referred as QoS) parameters. Next thing is we need to take care of the negotiations which should happen between session parameters. Then we further need to transmit limited transparent user data. Then at last, we need to monitor Data Transfer phase properly. The ability to send larger amount of data files is extremely important and a necessary thing too.

Functions of Session Layer : The session layer being the fifth layer in the OSI model performs several different as well as important functions which are need for establishing as well as maintaining a safe and secure connection.

Following are some of the functions which are performed by Session Layer –

• Session Layer works as a dialog controller through which it allows systems to communicate in either half-duplex mode or full duplex mode of communication.
• This layer is also responsible for token management, through which it prevents two users to simultaneously access or attempting the same critical operation.
• This layer allows synchronization by allowing the process of adding checkpoints, which are considered as synchronization points to the streams of data.
• This layer is also responsible for session checkpointing and recovery.
• This layer basically provides a mechanism of opening, closing and managing a session between the end-user application processes.
• The services offered by Session Layer are generally implemented in application environments using remote procedure calls (RPCs).
• The Session Layer is also responsible for synchronizing information from different sources.
• This layer also controls single or multiple connections for each-end user application and directly communicates with both Presentation and transport layers.
• Session Layer creates procedures for checkpointing followed by adjournment, restart and termination.
• Session Layer uses checkpoints to enable communication sessions which are to be resumed from that particular checkpoint at which communication failure has occurred.
• The session Layer is responsible for fetching or receiving data information from its previous layer (transport layer) and further sends data to the layer after it (presentation layer).

Session Layer Protocols : Session Layer uses some protocols which are required for safe, secure and accurate communication which exists between two-ender user applications. Following are some of the protocols provided or used by the Session Layer –

• AppleTalk Data Stream Protocol (ADSP): ADSP is that type of protocol which was developed by Apple Inc. and it includes a number of features that allow local area networks to be connected with no prior setup. This protocol was released in 1985.  This protocol rigorously followed the OSI model of protocol layering. ADSP itself has two protocols named: AppleTalk Address Resolution Protocol (AARP) and Name Binding Protocol (NBP), both aimed at making system self-configuring.
• Real-time Transport Control Protocol (RTCP): RTCP is a protocol which provides out-of-band statistics and control information for an RTP (Real-time Transport Protocol) session. RTCP’s primary function is to provide feedback on the quality of service (QoS) in media distribution by periodically sending statistical information such as transmitted octet and packet counts or packet loss to the participants in the streaming multimedia session.
• Point-to-Point Tunneling Protocol (PPTP): PPTP is a protocol which provides a method for implementing virtual private networks. PPTP uses a TCP control channel and a Generic Routing Encapsulation tunnel to encapsulate PPP (Point-to-Point Protocol) packets This protocol provides security levels and remote access levels comparable with typical VPN (Virtual Private Network) products.
• Password Authentication Protocol (PAP): Password Authentication Protocol is a password-based authentication protocol used by Point to Point Protocol (PPP) to validate users. Almost all network operating systems, remote servers support PAP. PAP authentication is done at the time of the initial link establishment and verifies the identity of the client using a two-way handshake (Client-sends data and server in return sends Authentication-ACK (Acknowledgement) after the data sent by client is verified completely).
• Remote Procedure Call Protocol (RPCP): Remote Procedure Call Protocol (RPCP) is a protocol that is used when a computer program causes a procedure (or a sub-routine) to execute in a different address space without the programmer explicitly coding the details for the remote interaction. This is basically the form of client-server interaction, typically implemented via a request-response message-passing system.
• Sockets Direct Protocol (SDP): Sockets Direct Protocol (SDP) is a protocol that supports streams of sockets over Remote Direct Memory Access (RDMA) network fabrics. The purpose of SDP is to provide an RDMA-accelerated alternative to the TCP protocol. The primary goal is to perform one particular thing in such a manner which is transparent to the application.

Please Login to comment...

Similar reads.

• Google Releases ‘Prompting Guide’ With Tips For Gemini In Workspace
• Google Cloud Next 24 | Gmail Voice Input, Gemini for Google Chat, Meet ‘Translate for me,’ & More
• 10 Best Viber Alternatives for Better Communication
• 12 Best Database Management Software in 2024
• 30 OOPs Interview Questions and Answers (2024)

Improve your Coding Skills with Practice

What kind of Experience do you want to share?