how to quote in research paper

Have a thesis expert improve your writing

Check your thesis for plagiarism in 10 minutes, generate your apa citations for free.

• Knowledge Base
• Working with sources
• How to Quote | Citing Quotes in Harvard & APA

How to Quote | Citing Quotes in Harvard & APA

Published on 15 April 2022 by Shona McCombes and Jack Caulfield. Revised on 3 September 2022.

Quoting means copying a passage of someone else’s words and crediting the source. To quote a source, you must ensure:

• The quoted text is enclosed in quotation marks (usually single quotation marks in UK English, though double is acceptable as long as you’re consistent) or formatted as a block quote
• The original author is correctly cited
• The text is identical to the original

The exact format of a quote depends on its length and on which citation style you are using. Quoting and citing correctly is essential to avoid plagiarism , which is easy to detect with a good plagiarism checker .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to cite a quote in harvard and apa style, introducing quotes, quotes within quotes, shortening or altering a quote, block quotes, when should i use quotes, frequently asked questions about quoting sources.

Every time you quote, you must cite the source correctly . This looks slightly different depending on the citation style you’re using.

Citing a quote in Harvard style

When you include a quote in Harvard style, you must add a Harvard in-text citation giving the author’s last name, the year of publication, and a page number if available. Any full stop or comma appears after the citation, not within the quotation marks.

Citations can be parenthetical or narrative. In a parenthetical citation , you place all the information in brackets after the quote. In a narrative citation , you name the author in your sentence (followed by the year), and place the page number after the quote.

• Evolution is a gradual process that ‘can act only by very short and slow steps’ (Darwin, 1859, p. 510) . Darwin (1859) explains that evolution ‘can act only by very short and slow steps’ (p. 510) .

Complete guide to Harvard style

Citing a quote in APA Style

To cite a direct quote in APA , you must include the author’s last name, the year, and a page number, all separated by commas. If the quote appears on a single page, use ‘p.’; if it spans a page range, use ‘pp.’

An APA in-text citation can be parenthetical or narrative. In a parenthetical citation , you place all the information in parentheses after the quote. In a narrative citation , you name the author in your sentence (followed by the year), and place the page number after the quote.

Punctuation marks such as full stops and commas are placed after the citation, not within the quotation marks.

• Evolution is a gradual process that ‘can act only by very short and slow steps’ (Darwin, 1859, p. 510) .
• Darwin (1859) explains that evolution ‘can act only by very short and slow steps’ (p. 510) .

Complete guide to APA

The only proofreading tool specialized in correcting academic writing.

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Make sure you integrate quotes properly into your text by introducing them in your own words, showing the reader why you’re including the quote and providing any context necessary to understand it.  Don’t  present quotations as stand-alone sentences.

There are three main strategies you can use to introduce quotes in a grammatically correct way:

• Add an introductory sentence
• Use an introductory signal phrase
• Integrate the quote into your own sentence

The following examples use APA Style citations, but these strategies can be used in all styles.

Introductory sentence

Introduce the quote with a full sentence ending in a colon . Don’t use a colon if the text before the quote isn’t a full sentence.

If you name the author in your sentence, you may use present-tense verbs, such as “states’, ‘argues’, ‘explains’, ‘writes’, or ‘reports’, to describe the content of the quote.

• In Denmark, a recent poll shows that: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• In Denmark, a recent poll shows that support for the EU has grown since the Brexit vote: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• Levring (2018) reports that support for the EU has grown since the Brexit vote: ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (p. 3).

Introductory signal phrase

You can also use a signal phrase that mentions the author or source but doesn’t form a full sentence. In this case, you follow the phrase with a comma instead of a colon.

• According to a recent poll, ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (Levring, 2018, p. 3).
• As Levring (2018) explains, ‘A membership referendum held today would be backed by 55 percent of Danish voters’ (p. 3).

Integrated into your own sentence

To quote a phrase that doesn’t form a full sentence, you can also integrate it as part of your sentence, without any extra punctuation.

• A recent poll suggests that EU membership ‘would be backed by 55 percent of Danish voters’ in a referendum (Levring, 2018, p. 3).
• Levring (2018) reports that EU membership ‘would be backed by 55 percent of Danish voters’ in a referendum (p. 3).

When you quote text that itself contains another quote, this is called a nested quotation or a quote within a quote. It may occur, for example, when quoting dialogue from a novel.

To distinguish this quote from the surrounding quote, you enclose it in double (instead of single) quotation marks (even if this involves changing the punctuation from the original text). Make sure to close both sets of quotation marks at the appropriate moments.

Note that if you only quote the nested quotation itself, and not the surrounding text, you can just use single quotation marks.

• Carraway introduces his narrative by quoting his father: ‘ ‘ Whenever you feel like criticizing anyone, ‘ he told me, ‘ just remember that all the people in this world haven’t had the advantages that you’ve had ‘ ‘ (Fitzgerald 1).
• Carraway introduces his narrative by quoting his father: ‘”Whenever you feel like criticizing anyone,” he told me, “just remember that all the people in this world haven’t had the advantages that you’ve had “  (Fitzgerald 1).
• Carraway introduces his narrative by quoting his father: ‘“Whenever you feel like criticizing anyone,” he told me, “just remember that all the people in this world haven’t had the advantages that you’ve had”’ (Fitzgerald 1).
• Carraway begins by quoting his father’s invocation to ‘remember that all the people in this world haven’t had the advantages that you’ve had’ (Fitzgerald 1).

Note:  When the quoted text in the source comes from another source, it’s best to just find that original source in order to quote it directly. If you can’t find the original source, you can instead cite it indirectly .

Often, incorporating a quote smoothly into your text requires you to make some changes to the original text. It’s fine to do this, as long as you clearly mark the changes you’ve made to the quote.

Shortening a quote

If some parts of a passage are redundant or irrelevant, you can shorten the quote by removing words, phrases, or sentences and replacing them with an ellipsis (…). Put a space before and after the ellipsis.

Be careful that removing the words doesn’t change the meaning. The ellipsis indicates that some text has been removed, but the shortened quote should still accurately represent the author’s point.

Altering a quote

You can add or replace words in a quote when necessary. This might be because the original text doesn’t fit grammatically with your sentence (e.g., it’s in a different tense), or because extra information is needed to clarify the quote’s meaning.

Use brackets to distinguish words that you have added from words that were present in the original text.

The Latin term ‘ sic ‘ is used to indicate a (factual or grammatical) mistake in a quotation. It shows the reader that the mistake is from the quoted material, not a typo of your own.

In some cases, it can be useful to italicise part of a quotation to add emphasis, showing the reader that this is the key part to pay attention to. Use the phrase ’emphasis added’ to show that the italics were not part of the original text.

You usually don’t need to use brackets to indicate minor changes to punctuation or capitalisation made to ensure the quote fits the style of your text.

If you quote more than a few lines from a source, you must format it as a block quote . Instead of using quotation marks, you set the quote on a new line and indent it so that it forms a separate block of text.

Block quotes are cited just like regular quotes, except that if the quote ends with a full stop, the citation appears after the full stop.

To the end of his days Bilbo could never remember how he found himself outside, without a hat, a walking-stick or any money, or anything that he usually took when he went out; leaving his second breakfast half-finished and quite unwashed-up, pushing his keys into Gandalf’s hands, and running as fast as his furry feet could carry him down the lane, past the great Mill, across The Water, and then on for a mile or more. (16)

Avoid relying too heavily on quotes in academic writing . To integrate a source , it’s often best to paraphrase , which means putting the passage into your own words. This helps you integrate information smoothly and keeps your own voice dominant.

However, there are some situations in which quotes are more appropriate.

When focusing on language

If you want to comment on how the author uses language (for example, in literary analysis ), it’s necessary to quote so that the reader can see the exact passage you are referring to.

When giving evidence

To convince the reader of your argument, interpretation or position on a topic, it’s often helpful to include quotes that support your point. Quotes from primary sources (for example, interview transcripts or historical documents) are especially credible as evidence.

When presenting an author’s position or definition

When you’re referring to secondary sources such as scholarly books and journal articles, try to put others’ ideas in your own words when possible.

But if a passage does a great job at expressing, explaining, or defining something, and it would be very difficult to paraphrase without changing the meaning or losing the weakening the idea’s impact, it’s worth quoting directly.

A quote is an exact copy of someone else’s words, usually enclosed in quotation marks and credited to the original author or speaker.

To present information from other sources in academic writing , it’s best to paraphrase in most cases. This shows that you’ve understood the ideas you’re discussing and incorporates them into your text smoothly.

It’s appropriate to quote when:

• Changing the phrasing would distort the meaning of the original text
• You want to discuss the author’s language choices (e.g., in literary analysis )
• You’re presenting a precise definition
• You’re looking in depth at a specific claim

Every time you quote a source , you must include a correctly formatted in-text citation . This looks slightly different depending on the citation style .

For example, a direct quote in APA is cited like this: ‘This is a quote’ (Streefkerk, 2020, p. 5).

Every in-text citation should also correspond to a full reference at the end of your paper.

In scientific subjects, the information itself is more important than how it was expressed, so quoting should generally be kept to a minimum. In the arts and humanities, however, well-chosen quotes are often essential to a good paper.

In social sciences, it varies. If your research is mainly quantitative , you won’t include many quotes, but if it’s more qualitative , you may need to quote from the data you collected .

As a general guideline, quotes should take up no more than 5–10% of your paper. If in doubt, check with your instructor or supervisor how much quoting is appropriate in your field.

If you’re quoting from a text that paraphrases or summarises other sources and cites them in parentheses , APA  recommends retaining the citations as part of the quote:

• Smith states that ‘the literature on this topic (Jones, 2015; Sill, 2019; Paulson, 2020) shows no clear consensus’ (Smith, 2019, p. 4).

Footnote or endnote numbers that appear within quoted text should be omitted.

If you want to cite an indirect source (one you’ve only seen quoted in another source), either locate the original source or use the phrase ‘as cited in’ in your citation.

A block quote is a long quote formatted as a separate ‘block’ of text. Instead of using quotation marks , you place the quote on a new line, and indent the entire quote to mark it apart from your own words.

APA uses block quotes for quotes that are 40 words or longer.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. & Caulfield, J. (2022, September 03). How to Quote | Citing Quotes in Harvard & APA. Scribbr. Retrieved 1 April 2024, from https://www.scribbr.co.uk/working-sources/quoting/

Is this article helpful?

Shona McCombes

Other students also liked, how to paraphrase | step-by-step guide & examples, how to avoid plagiarism | tips on citing sources, the 5 types of plagiarism | explanations & examples.

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

MLA Formatting Quotations

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

MLA (Modern Language Association) style is most commonly used to write papers and cite sources within the liberal arts and humanities. This resource, updated to reflect the MLA Handbook (8 th ed.), offers examples for the general format of MLA research papers, in-text citations, endnotes/footnotes, and the Works Cited page.

When you directly quote the works of others in your paper, you will format quotations differently depending on their length. Below are some basic guidelines for incorporating quotations into your paper. Please note that all pages in MLA should be double-spaced .

Short quotations

To indicate short quotations (four typed lines or fewer of prose or three lines of verse) in your text, enclose the quotation within double quotation marks. Provide the author and specific page number (in the case of verse, provide line numbers) in the in-text citation, and include a complete reference on the Works Cited page. Punctuation marks such as periods, commas, and semicolons should appear after the parenthetical citation.

Question marks and exclamation points should appear within the quotation marks if they are a part of the quoted passage, but after the parenthetical citation if they are a part of your text.

For example, when quoting short passages of prose, use the following examples:

When using short (fewer than three lines of verse) quotations from poetry, mark breaks in verse with a slash, ( / ), at the end of each line of verse (a space should precede and follow the slash). If a stanza break occurs during the quotation, use a double slash ( // ).

Long quotations

For quotations that are more than four lines of prose or three lines of verse, place quotations in a free-standing block of text and omit quotation marks. Start the quotation on a new line, with the entire quote indented 1/2   inch  from the left margin while maintaining double-spacing. Your parenthetical citation should come  after the closing punctuation mark . When quoting verse, maintain original line breaks. (You should maintain double-spacing throughout your essay.)

For example, when citing more than four lines of prose, use the following examples :

Nelly Dean treats Heathcliff poorly and dehumanizes him throughout her narration: They entirely refused to have it in bed with them, or even in their room, and I had no more sense, so, I put it on the landing of the stairs, hoping it would be gone on the morrow. By chance, or else attracted by hearing his voice, it crept to Mr. Earnshaw's door, and there he found it on quitting his chamber. Inquiries were made as to how it got there; I was obliged to confess, and in recompense for my cowardice and inhumanity was sent out of the house. (Bronte 78)

When citing long sections of poetry (four lines of verse or more), keep formatting as close to the original as possible.

In his poem "My Papa's Waltz," Theodore Roethke explores his childhood with his father:

The whiskey on your breath Could make a small boy dizzy; But I hung on like death: Such waltzing was not easy. We Romped until the pans Slid from the kitchen shelf; My mother's countenance Could not unfrown itself. (qtd. in Shrodes, Finestone, Shugrue 202)

When citing two or more paragraphs, use block quotation format, even if the passage from the paragraphs is less than four lines. If you cite more than one paragraph, the first line of the second paragraph should be indented an extra 1/4 inch to denote a new paragraph:

In "American Origins of the Writing-across-the-Curriculum Movement," David Russell argues,

Writing has been an issue in American secondary and higher education since papers and examinations came into wide use in the 1870s, eventually driving out formal recitation and oral examination. . . .

From its birth in the late nineteenth century, progressive education has wrestled with the conflict within industrial society between pressure to increase specialization of knowledge and of professional work (upholding disciplinary standards) and pressure to integrate more fully an ever-widening number of citizens into intellectually meaningful activity within mass society (promoting social equity). . . . (3)

Adding or omitting words in quotations

If you add a word or words in a quotation, you should put brackets around the words to indicate that they are not part of the original text:

If you omit a word or words from a quotation, you should indicate the deleted word or words by using ellipses, which are three periods ( . . . ) preceded and followed by a space. For example:

Please note that brackets are not needed around ellipses unless they would add clarity.

When omitting words from poetry quotations, use a standard three-period ellipses; however, when omitting one or more full lines of poetry, space several periods to about the length of a complete line in the poem:

Quoting and integrating sources into your paper

In any study of a subject, people engage in a “conversation” of sorts, where they read or listen to others’ ideas, consider them with their own viewpoints, and then develop their own stance. It is important in this “conversation” to acknowledge when we use someone else’s words or ideas. If we didn’t come up with it ourselves, we need to tell our readers who did come up with it.

It is important to draw on the work of experts to formulate your own ideas. Quoting and paraphrasing the work of authors engaged in writing about your topic adds expert support to your argument and thesis statement. You are contributing to a scholarly conversation with scholars who are experts on your topic with your writing. This is the difference between a scholarly research paper and any other paper: you must include your own voice in your analysis and ideas alongside scholars or experts.

All your sources must relate to your thesis, or central argument, whether they are in agreement or not. It is a good idea to address all sides of the argument or thesis to make your stance stronger. There are two main ways to incorporate sources into your research paper.

Quoting is when you use the exact words from a source. You will need to put quotation marks around the words that are not your own and cite where they came from. For example:

“It wasn’t really a tune, but from the first note the beast’s eyes began to droop . . . Slowly the dog’s growls ceased – it tottered on its paws and fell to its knees, then it slumped to the ground, fast asleep” (Rowling 275).

Follow these guidelines when opting to cite a passage:

• Choose to quote passages that seem especially well phrased or are unique to the author or subject matter.
• Be selective in your quotations. Avoid over-quoting. You also don’t have to quote an entire passage. Use ellipses (. . .) to indicate omitted words. Check with your professor for their ideal length of quotations – some professors place word limits on how much of a sentence or paragraph you should quote.
• Before or after quoting a passage, include an explanation in which you interpret the significance of the quote for the reader. Avoid “hanging quotes” that have no context or introduction. It is better to err on the side of your reader not understanding your point until you spell it out for them, rather than assume readers will follow your thought process exactly.
• If you are having trouble paraphrasing (putting something into your own words), that may be a sign that you should quote it.
• Shorter quotes are generally incorporated into the flow of a sentence while longer quotes may be set off in “blocks.” Check your citation handbook for quoting guidelines.

Paraphrasing is when you state the ideas from another source in your own words . Even when you use your own words, if the ideas or facts came from another source, you need to cite where they came from. Quotation marks are not used. For example:

With the simple music of the flute, Harry lulled the dog to sleep (Rowling 275).

Follow these guidelines when opting to paraphrase a passage:

• Don’t take a passage and change a word here or there. You must write out the idea in your own words. Simply changing a few words from the original source or restating the information exactly using different words is considered plagiarism .
• Read the passage, reflect upon it, and restate it in a way that is meaningful to you within the context of your paper . You are using this to back up a point you are making, so your paraphrased content should be tailored to that point specifically.
• After reading the passage that you want to paraphrase, look away from it, and imagine explaining the main point to another person.
• After paraphrasing the passage, go back and compare it to the original. Are there any phrases that have come directly from the original source? If so, you should rephrase it or put the original in quotation marks. If you cannot state an idea in your own words, you should use the direct quotation.

A summary is similar to paraphrasing, but used in cases where you are trying to give an overview of many ideas. As in paraphrasing, quotation marks are not used, but a citation is still necessary. For example:

Through a combination of skill and their invisibility cloak, Harry, Ron, and Hermione slipped through Hogwarts to the dog’s room and down through the trapdoor within (Rowling 271-77).

Important guidelines

When integrating a source into your paper, remember to use these three important components:

• Introductory phrase to the source material : mention the author, date, or any other relevant information when introducing a quote or paraphrase.
• Source material : a direct quote, paraphrase, or summary with proper citation.
• Analysis of source material : your response, interpretations, or arguments regarding the source material should introduce or follow it. When incorporating source material into your paper, relate your source and analysis back to your original thesis.

Ideally, papers will contain a good balance of direct quotations, paraphrasing and your own thoughts. Too much reliance on quotations and paraphrasing can make it seem like you are only using the work of others and have no original thoughts on the topic.

Always properly cite an author’s original idea, whether you have directly quoted or paraphrased it. If you have questions about how to cite properly in your chosen citation style, browse these citation guides . You can also review our guide to understanding plagiarism .

University Writing Center

The University of Nevada, Reno Writing Center provides helpful guidance on quoting and paraphrasing and explains how to make sure your paraphrasing does not veer into plagiarism. If you have any questions about quoting or paraphrasing, or need help at any point in the writing process, schedule an appointment with the Writing Center.

Works Cited

Rowling, J.K. Harry Potter and the Sorcerer's Stone.  A.A. Levine Books, 1998.

What this handout is about

Used effectively, quotations can provide important pieces of evidence and lend fresh voices and perspectives to your narrative. Used ineffectively, however, quotations can clutter your text and interrupt the flow of your argument. This handout will help you decide when and how to quote like a pro.

When should I quote?

Use quotations at strategically selected moments. You have probably been told by teachers to provide as much evidence as possible in support of your thesis. But packing your paper with quotations will not necessarily strengthen your argument. The majority of your paper should still be your original ideas in your own words (after all, it’s your paper). And quotations are only one type of evidence: well-balanced papers may also make use of paraphrases, data, and statistics. The types of evidence you use will depend in part on the conventions of the discipline or audience for which you are writing. For example, papers analyzing literature may rely heavily on direct quotations of the text, while papers in the social sciences may have more paraphrasing, data, and statistics than quotations.

Discussing specific arguments or ideas

Sometimes, in order to have a clear, accurate discussion of the ideas of others, you need to quote those ideas word for word. Suppose you want to challenge the following statement made by John Doe, a well-known historian:

“At the beginning of World War Two, almost all Americans assumed the war would end quickly.”

If it is especially important that you formulate a counterargument to this claim, then you might wish to quote the part of the statement that you find questionable and establish a dialogue between yourself and John Doe:

Historian John Doe has argued that in 1941 “almost all Americans assumed the war would end quickly” (Doe 223). Yet during the first six months of U.S. involvement, the wives and mothers of soldiers often noted in their diaries their fear that the war would drag on for years.

Giving added emphasis to a particularly authoritative source on your topic.

There will be times when you want to highlight the words of a particularly important and authoritative source on your topic. For example, suppose you were writing an essay about the differences between the lives of male and female slaves in the U.S. South. One of your most provocative sources is a narrative written by a former slave, Harriet Jacobs. It would then be appropriate to quote some of Jacobs’s words:

Harriet Jacobs, a former slave from North Carolina, published an autobiographical slave narrative in 1861. She exposed the hardships of both male and female slaves but ultimately concluded that “slavery is terrible for men; but it is far more terrible for women.”

In this particular example, Jacobs is providing a crucial first-hand perspective on slavery. Thus, her words deserve more exposure than a paraphrase could provide.

Jacobs is quoted in Harriet A. Jacobs, Incidents in the Life of a Slave Girl, ed. Jean Fagan Yellin (Cambridge: Harvard University Press, 1987).

Analyzing how others use language.

This scenario is probably most common in literature and linguistics courses, but you might also find yourself writing about the use of language in history and social science classes. If the use of language is your primary topic, then you will obviously need to quote users of that language.

Examples of topics that might require the frequent use of quotations include:

Southern colloquial expressions in William Faulkner’s Light in August

Ms. and the creation of a language of female empowerment

A comparison of three British poets and their use of rhyme

Spicing up your prose.

In order to lend variety to your prose, you may wish to quote a source with particularly vivid language. All quotations, however, must closely relate to your topic and arguments. Do not insert a quotation solely for its literary merits.

One example of a quotation that adds flair:

President Calvin Coolidge’s tendency to fall asleep became legendary. As H. L. Mencken commented in the American Mercury in 1933, “Nero fiddled, but Coolidge only snored.”

How do I set up and follow up a quotation?

Once you’ve carefully selected the quotations that you want to use, your next job is to weave those quotations into your text. The words that precede and follow a quotation are just as important as the quotation itself. You can think of each quote as the filling in a sandwich: it may be tasty on its own, but it’s messy to eat without some bread on either side of it. Your words can serve as the “bread” that helps readers digest each quote easily. Below are four guidelines for setting up and following up quotations.

In illustrating these four steps, we’ll use as our example, Franklin Roosevelt’s famous quotation, “The only thing we have to fear is fear itself.”

1. Provide context for each quotation.

Do not rely on quotations to tell your story for you. It is your responsibility to provide your reader with context for the quotation. The context should set the basic scene for when, possibly where, and under what circumstances the quotation was spoken or written. So, in providing context for our above example, you might write:

When Franklin Roosevelt gave his inaugural speech on March 4, 1933, he addressed a nation weakened and demoralized by economic depression.

2. Attribute each quotation to its source.

Tell your reader who is speaking. Here is a good test: try reading your text aloud. Could your reader determine without looking at your paper where your quotations begin? If not, you need to attribute the quote more noticeably.

Avoid getting into the “they said” attribution rut! There are many other ways to attribute quotes besides this construction. Here are a few alternative verbs, usually followed by “that”:

Different reporting verbs are preferred by different disciplines, so pay special attention to these in your disciplinary reading. If you’re unfamiliar with the meanings of any of these words or others you find in your reading, consult a dictionary before using them.

3. Explain the significance of the quotation.

Once you’ve inserted your quotation, along with its context and attribution, don’t stop! Your reader still needs your assessment of why the quotation holds significance for your paper. Using our Roosevelt example, if you were writing a paper on the first one-hundred days of FDR’s administration, you might follow the quotation by linking it to that topic:

With that message of hope and confidence, the new president set the stage for his next one-hundred days in office and helped restore the faith of the American people in their government.

4. Provide a citation for the quotation.

All quotations, just like all paraphrases, require a formal citation. For more details about particular citation formats, see the UNC Libraries citation tutorial . In general, you should remember one rule of thumb: Place the parenthetical reference or footnote/endnote number after—not within—the closed quotation mark.

Roosevelt declared, “The only thing we have to fear is fear itself” (Roosevelt, Public Papers, 11).

Roosevelt declared, “The only thing we have to fear is fear itself.”1

How do I embed a quotation into a sentence?

In general, avoid leaving quotes as sentences unto themselves. Even if you have provided some context for the quote, a quote standing alone can disrupt your flow.  Take a look at this example:

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression. “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

Standing by itself, the quote’s connection to the preceding sentence is unclear. There are several ways to incorporate a quote more smoothly:

Lead into the quote with a colon.

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression: “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

The colon announces that a quote will follow to provide evidence for the sentence’s claim.

Introduce or conclude the quote by attributing it to the speaker. If your attribution precedes the quote, you will need to use a comma after the verb.

Hamlet denies Rosencrantz’s claim that thwarted ambition caused his depression. He states, “I could be bounded in a nutshell and count myself a king of infinite space” (Hamlet 2.2).

When faced with a twelve-foot mountain troll, Ron gathers his courage, shouting, “Wingardium Leviosa!” (Rowling, p. 176).

The Pirate King sees an element of regality in their impoverished and dishonest life. “It is, it is a glorious thing/To be a pirate king,” he declares (Pirates of Penzance, 1983).

Interrupt the quote with an attribution to the speaker. Again, you will need to use a comma after the verb, as well as a comma leading into the attribution.

“There is nothing either good or bad,” Hamlet argues, “but thinking makes it so” (Hamlet 2.2).

“And death shall be no more,” Donne writes, “Death thou shalt die” (“Death, Be Not Proud,” l. 14).

Dividing the quote may highlight a particular nuance of the quote’s meaning. In the first example, the division calls attention to the two parts of Hamlet’s claim. The first phrase states that nothing is inherently good or bad; the second phrase suggests that our perspective causes things to become good or bad. In the second example, the isolation of “Death thou shalt die” at the end of the sentence draws a reader’s attention to that phrase in particular. As you decide whether or not you want to break up a quote, you should consider the shift in emphasis that the division might create.

Use the words of the quote grammatically within your own sentence.

When Hamlet tells Rosencrantz that he “could be bounded in a nutshell and count [him]self a king of infinite space” (Hamlet 2.2), he implies that thwarted ambition did not cause his depression.

Ultimately, death holds no power over Donne since in the afterlife, “death shall be no more” (“Death, Be Not Proud,” l. 14).

Note that when you use “that” after the verb that introduces the quote, you no longer need a comma.

The Pirate King argues that “it is, it is a glorious thing/to be a pirate king” (Pirates of Penzance, 1983).

How much should I quote?

As few words as possible. Remember, your paper should primarily contain your own words, so quote only the most pithy and memorable parts of sources. Here are guidelines for selecting quoted material judiciously:

Excerpt fragments.

Sometimes, you should quote short fragments, rather than whole sentences. Suppose you interviewed Jane Doe about her reaction to John F. Kennedy’s assassination. She commented:

“I couldn’t believe it. It was just unreal and so sad. It was just unbelievable. I had never experienced such denial. I don’t know why I felt so strongly. Perhaps it was because JFK was more to me than a president. He represented the hopes of young people everywhere.”

You could quote all of Jane’s comments, but her first three sentences are fairly redundant. You might instead want to quote Jane when she arrives at the ultimate reason for her strong emotions:

Jane Doe grappled with grief and disbelief. She had viewed JFK, not just as a national figurehead, but as someone who “represented the hopes of young people everywhere.”

Excerpt those fragments carefully!

Quoting the words of others carries a big responsibility. Misquoting misrepresents the ideas of others. Here’s a classic example of a misquote:

John Adams has often been quoted as having said: “This would be the best of all possible worlds if there were no religion in it.”

John Adams did, in fact, write the above words. But if you see those words in context, the meaning changes entirely. Here’s the rest of the quotation:

Twenty times, in the course of my late reading, have I been on the point of breaking out, ‘this would be the best of all possible worlds, if there were no religion in it!!!!’ But in this exclamation, I should have been as fanatical as Bryant or Cleverly. Without religion, this world would be something not fit to be mentioned in public company—I mean hell.

As you can see from this example, context matters!

This example is from Paul F. Boller, Jr. and John George, They Never Said It: A Book of Fake Quotes, Misquotes, and Misleading Attributions (Oxford University Press, 1989).

Use block quotations sparingly.

There may be times when you need to quote long passages. However, you should use block quotations only when you fear that omitting any words will destroy the integrity of the passage. If that passage exceeds four lines (some sources say five), then set it off as a block quotation.

Be sure you are handling block quotes correctly in papers for different academic disciplines–check the index of the citation style guide you are using. Here are a few general tips for setting off your block quotations:

• Set up a block quotation with your own words followed by a colon.
• Indent. You normally indent 4-5 spaces for the start of a paragraph. When setting up a block quotation, indent the entire paragraph once from the left-hand margin.
• Single space or double space within the block quotation, depending on the style guidelines of your discipline (MLA, CSE, APA, Chicago, etc.).
• Do not use quotation marks at the beginning or end of the block quote—the indentation is what indicates that it’s a quote.
• Place parenthetical citation according to your style guide (usually after the period following the last sentence of the quote).
• Follow up a block quotation with your own words.

So, using the above example from John Adams, here’s how you might include a block quotation:

After reading several doctrinally rigid tracts, John Adams recalled the zealous ranting of his former teacher, Joseph Cleverly, and minister, Lemuel Bryant. He expressed his ambivalence toward religion in an 1817 letter to Thomas Jefferson:

Adams clearly appreciated religion, even if he often questioned its promotion.

How do I combine quotation marks with other punctuation marks?

It can be confusing when you start combining quotation marks with other punctuation marks. You should consult a style manual for complicated situations, but the following two rules apply to most cases:

Keep periods and commas within quotation marks.

So, for example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries.”

In the above example, both the comma and period were enclosed in the quotation marks. The main exception to this rule involves the use of internal citations, which always precede the last period of the sentence. For example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries” (Poe 167).

Note, however, that the period remains inside the quotation marks when your citation style involves superscript footnotes or endnotes. For example:

According to Professor Poe, werewolves “represent anxiety about the separation between human and animal,” and werewolf movies often “interrogate those boundaries.” 2

Place all other punctuation marks (colons, semicolons, exclamation marks, question marks) outside the quotation marks, except when they were part of the original quotation.

Take a look at the following examples:

I couldn’t believe it when my friend passed me a note in the cafe saying the management “started charging $15 per hour for parking”!

The coach yelled, “Run!”

In the first example, the author placed the exclamation point outside the quotation mark because she added it herself to emphasize the outrageous nature of the parking price change. The original note had not included an exclamation mark. In the second example, the exclamation mark remains within the quotation mark because it is indicating the excited tone in which the coach yelled the command. Thus, the exclamation mark is considered to be part of the original quotation.

How do I indicate quotations within quotations?

If you are quoting a passage that contains a quotation, then you use single quotation marks for the internal quotation. Quite rarely, you quote a passage that has a quotation within a quotation. In that rare instance, you would use double quotation marks for the second internal quotation.

Here’s an example of a quotation within a quotation:

In “The Emperor’s New Clothes,” Hans Christian Andersen wrote, “‘But the Emperor has nothing on at all!’ cried a little child.”

Remember to consult your style guide to determine how to properly cite a quote within a quote.

When do I use those three dots ( . . . )?

Whenever you want to leave out material from within a quotation, you need to use an ellipsis, which is a series of three periods, each of which should be preceded and followed by a space. So, an ellipsis in this sentence would look like . . . this. There are a few rules to follow when using ellipses:

Be sure that you don’t fundamentally change the meaning of the quotation by omitting material.

Take a look at the following example:

“The Writing Center is located on the UNC campus and serves the entire UNC community.”

“The Writing Center . . . serves the entire UNC community.”

The reader’s understanding of the Writing Center’s mission to serve the UNC community is not affected by omitting the information about its location.

Do not use ellipses at the beginning or ending of quotations, unless it’s important for the reader to know that the quotation was truncated.

For example, using the above example, you would NOT need an ellipsis in either of these situations:

“The Writing Center is located on the UNC campus . . .”

The Writing Center ” . . . serves the entire UNC community.”

Use punctuation marks in combination with ellipses when removing material from the end of sentences or clauses.

For example, if you take material from the end of a sentence, keep the period in as usual.

“The boys ran to school, forgetting their lunches and books. Even though they were out of breath, they made it on time.”

“The boys ran to school. . . . Even though they were out of breath, they made it on time.”

Likewise, if you excerpt material at the end of clause that ends in a comma, retain the comma.

“The red car came to a screeching halt that was heard by nearby pedestrians, but no one was hurt.”

“The red car came to a screeching halt . . . , but no one was hurt.”

Is it ever okay to insert my own words or change words in a quotation?

Sometimes it is necessary for clarity and flow to alter a word or words within a quotation. You should make such changes rarely. In order to alert your reader to the changes you’ve made, you should always bracket the altered words. Here are a few examples of situations when you might need brackets:

Changing verb tense or pronouns in order to be consistent with the rest of the sentence.

Suppose you were quoting a woman who, when asked about her experiences immigrating to the United States, commented “nobody understood me.” You might write:

Esther Hansen felt that when she came to the United States “nobody understood [her].”

In the above example, you’ve changed “me” to “her” in order to keep the entire passage in third person. However, you could avoid the need for this change by simply rephrasing:

“Nobody understood me,” recalled Danish immigrant Esther Hansen.

Including supplemental information that your reader needs in order to understand the quotation.

For example, if you were quoting someone’s nickname, you might want to let your reader know the full name of that person in brackets.

“The principal of the school told Billy [William Smith] that his contract would be terminated.”

Similarly, if a quotation referenced an event with which the reader might be unfamiliar, you could identify that event in brackets.

“We completely revised our political strategies after the strike [of 1934].”

Indicating the use of nonstandard grammar or spelling.

In rare situations, you may quote from a text that has nonstandard grammar, spelling, or word choice. In such cases, you may want to insert [sic], which means “thus” or “so” in Latin. Using [sic] alerts your reader to the fact that this nonstandard language is not the result of a typo on your part. Always italicize “sic” and enclose it in brackets. There is no need to put a period at the end. Here’s an example of when you might use [sic]:

Twelve-year-old Betsy Smith wrote in her diary, “Father is afraid that he will be guilty of beach [sic] of contract.”

Here [sic] indicates that the original author wrote “beach of contract,” not breach of contract, which is the accepted terminology.

Do not overuse brackets!

For example, it is not necessary to bracket capitalization changes that you make at the beginning of sentences. For example, suppose you were going to use part of this quotation:

“The colors scintillated curiously over a hard carapace, and the beetle’s tiny antennae made gentle waving motions as though saying hello.”

If you wanted to begin a sentence with an excerpt from the middle of this quotation, there would be no need to bracket your capitalization changes.

“The beetle’s tiny antennae made gentle waving motions as though saying hello,” said Dr. Grace Farley, remembering a defining moment on her journey to becoming an entomologist.

Not: “[T]he beetle’s tiny antennae made gentle waving motions as though saying hello,” said Dr. Grace Farley, remembering a defining moment on her journey to becoming an entomologist.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Barzun, Jacques, and Henry F. Graff. 2012. The Modern Researcher , 6th ed. Belmont, CA: Wadsworth Cengage Learning.

Booth, Wayne C., Gregory G. Colomb, Joseph M. Williams, Joseph Bizup, and William T. FitzGerald. 2016. The Craft of Research , 4th ed. Chicago: University of Chicago Press.

Gibaldi, Joseph. 2009. MLA Handbook for Writers of Research Papers , 7th ed. New York: The Modern Language Association of America.

Turabian, Kate. 2018. A Manual for Writers of Term Papers, Theses, Dissertations , 9th ed. Chicago: University of Chicago Press.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Library Catalogue

Quoting: When and how to use quotations

On this page, when should you quote, quoting basics, framing your quotations.

Quoting is an important technique used to include information from outside sources in academic writing. When using quotations, it is important that you also cite the original reference that you  have taken the quotation from, as your citations provide your reader with a map of the research that you have done. Making effective use of quotations in your writing requires you to carefully assess the value of including someone else’s own words in the advancement of your own argument.

According to Jerry Plotnick (2002, Director of the University College Writing Workshop) using a quotation is appropriate in the following situations:

1.       The language of the passage is particularly elegant, powerful, or memorable.

2.       You wish to confirm the credibility of your argument by enlisting the support of an authority on your topic.

3.       The passage is worthy of further analysis. 

4.       You wish to argue with someone else’s position in considerable detail. [1]

Research that involves participants (for example, interviews and participant-observation research) also often makes extensive use of quotations in order to foreground the unique voices and perspectives of the participants.

When you quote, you include the words and ideas of others in your text exactly as they have expressed them. You signal this inclusion by placing quotation marks (“ ”) around the source author’s words and providing an in-text citation after the quotation. Direct quotations differ from other in-text citations because they require that you include the page number on which the words can be found in the source text.  For example:

According to scholars of rhetoric Graff and Birkenstein (2014), when you are inserting a quotation in your writing “you need to insert it into what we like to call a ‘quotation sandwich,’ with the statement introducing it serving as the top slice of bread and the explanation following it serving as the bottom slice” (p. 46). [2] This "sandwich" method ensures that your reader can clearly see the source you are referencing and also understands how this quotation supports your overall argument.

When you are quoting from a source that does not have page numbers (such as a website), you will consult your style guide to determine how best to reference your source. For example, both MLA and APA suggest listing the paragraph number or relevant heading.

You quote materials from a source text to support the arguments and ideas you are presenting in your own essay. Therefore, you must introduce the quotation and explain to your reader why you have included it and how it relates to, and helps to build, your argument. This is known as framing. It directs your reader’s attention to the specific elements of the quotation that are most directly relevant to your own arguments and ideas.

Here is an example of a quotation that is successfully “framed” within a text:

Citing the islands of Fiji as a case in point, Bordo notes that “until television was introduced in 1995, the islands had no reported cases of eating disorders. In 1998, three years after programs from the United States and Britain began broadcasting there, 62 percent of the girls surveyed reported dieting” (149-50). Bordo’s point is that the Western cult of dieting is spreading even to remote places across the globe. [3]

Remember that quoting is only one way of bringing someone else’s work into your own discussion. See the SLC handouts “Techniques for paraphrasing” and “Summarizing” for ideas on other ways to incorporate sources into your writing.

[1] http://www.writing.utoronto.ca/images/stories/Documents/quotations.pdf

[2] APA formatting

[3] Example taken from Graff, G. & Birkenstein, C. (2014). They say/I say: The moves that matter in academic writing. New York and London: W.W. Norton & Company.

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Cite a Research Paper in APA

Last Updated: October 19, 2022 Fact Checked

This article was co-authored by wikiHow Staff . Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. There are 12 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 158,601 times. Learn more...

If you’re citing a research article or paper in APA style, you’ll need to use a specific citation format that varies depending on the source. Assess whether your source is an article or report published in an academic journal or book, or whether it is an unpublished research paper, such as a print-only thesis or dissertation. Either way, your in-text citations will need to include information about the author (if available) and the date when your source was published or written.

Sample Citations

Writing an In-Text Citation

• For example, you may write, “Gardener (2008) notes, ‘There are several factors to consider about lobsters’ (p. 199).”

• For example, you may write, “‘There are several factors to consider about lobsters’ (Gardner, 2008, p. 199).” Or, “The paper claims, ‘The fallen angel trope is common in religious and non-religious texts’ (Meek & Hill, 2015, p.13-14).”
• For articles with 3-5 authors, write out the names of all the authors the first time you cite the source. For example: (Hammett, Wooster, Smith, & Charles, 1928). In subsequent citations, write only the first author’s name, followed by et al.: (Hammett et al., 1928).
• If there are 6 or more authors for the paper, include the last name of the first author listed and then write "et al." to indicate that there are more than 5 authors.
• For example, you may write, "'This is a quote' (Minaj et al., 1997, p. 45)."

• For example, you may write, “‘The risk of cervical cancer in women is rising’ (American Cancer Society, 2012, p. 2).”

• For example, you may write, “‘Shakespeare may have been a woman’ (“Radical English Literature,” 2004, p. 45).” Or, “The paper notes, ‘There is a boom in Virgin Mary imagery’ (“Art History in Italy,” 2011, p. 32).”

• For example, you may write, “‘There are several factors to consider about lobsters’ (Gardner, 2008, p. 199).” Or, “The paper claims, ‘The fallen angel trope is common in religious and non-religious texts’ (“Iconography in Italian Frescos,” 2015, p.13-14).”

• For example, you may write, “‘There are several factors to consider about lobsters’ (Gardner, 2008, p. 199).” Or, “The paper claims, ‘The fallen angel trope is common in religious and non-religious texts’ (“Iconography in Italian Frescos,” 2015, p.145-146).”

• For example, you may write, “‘The effects of food deprivation are long-term’ (Mett, 2005, para. 18).”

Creating a Reference List Citation for a Published Source

• Material on websites is also considered “published,” even if it’s not peer-reviewed or associated with a formal publishing company.
• While academic dissertations or theses that are print-only are considered unpublished, these types of documents are considered published if they’re included in an online database (such as ProQuest) or incorporated into an institutional repository.

• For example, you may write, “Gardner, L. M.” Or, “Meek, P. Q., Kendrick, L. H., & Hill, R. W.”
• If there is no author, you can list the name of the organization that published the research paper. For example, you may write, “American Cancer Society” or “The Reading Room.”
• Formally published documents that don’t list an author or that have a corporate author are typically reports or white papers .

• For example, you may write, “Gardner, L. M. (2008).” Or, “American Cancer Society. (2015).”

• For example, you may write, “Gardner, L. M. (2008). Crustaceans: Research and data.” Or, “American Cancer Society. (2015). Cervical cancer rates in women ages 20-45.”

• For example, for a journal article, you may write, “Gardner, L. M. (2008). Crustaceans: Research and data. Modern Journal of Malacostracan Research, 25, 150-305.”
• For a book chapter, you could write: “Wooster, B. W. (1937). A comparative study of modern Dutch cow creamers. In T. E. Travers (Ed.), A Detailed History of Tea Serviceware (pp. 127-155). London: Wimble Press."

• For example, you may write, “Kotb, M. A., Kamal, A. M., Aldossary, N. M., & Bedewi, M. A. (2019). Effect of vitamin D replacement on depression in multiple sclerosis patients. Multiple Sclerosis and Related Disorders, 29, 111-117. Retrieved from PubMed, https://www.ncbi.nlm.nih.gov/pubmed/30708308.
• If you’re citing a paper or article that was published online but did not come from an academic journal or database, provide information about the author (if known), the date of publication (if available), and the website where you found the article. For example: “Hill, M. (n.d.). Egypt in the Ptolemaic Period. Retrieved from https://www.metmuseum.org/toah/hd/ptol/hd_ptol.htm”

Citing Unpublished Sources in Your Reference List

• Print-only dissertations or theses.
• Articles or book chapters that are in press or have been recently prepared or submitted for publication.
• Papers that have been rejected for publication or were never intended for publication (such as student research papers or unpublished conference papers).

• If the paper is currently being prepared for publication, include the author’s name, the year when the current draft was completed, and the title of the article in italics, followed by “Manuscript in preparation.” For example: Wooster, B. W. (1932). What the well-dressed man is wearing. Manuscript in preparation.
• If the paper has been submitted for publication, format the citation the same way as if it were in preparation, but instead follow the title with “Manuscript submitted for publication.” For example: Wooster, B. W. (1932). What the well-dressed man is wearing. Manuscript submitted for publication.
• If the paper has been accepted for publication but is not yet published, replace the date with “in press.” Do not italicize the paper title, but do include the title of the periodical or book in which it will be published and italicize that. For example: Wooster, B. W. (in press). What the well-dressed man is wearing. Milady’s Boudoir.

• If the paper was written for a conference but never published, your citation should look like this: Riker, W. T. (2019, March). Traditional methods for the preparation of spiny lobe-fish. Paper presented at the 325th Annual Intergalactic Culinary Conference, San Francisco, CA.
• For an unpublished paper written by a student for a class, include details about the institution where the paper was written. For example: Crusher, B. H. (2019). A typology of Cardassian skin diseases. Unpublished manuscript, Department of External Medicine, Starfleet Academy, San Francisco, CA.

• For example, you may write, “Pendlebottom, R. H. (2011). Iconography in Italian Frescos (Unpublished doctoral dissertation). New York University, New York, United States.”

Community Q&A

• If you want certain information to stand out in the research paper, then you can consider using a block quote. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://libraryguides.vu.edu.au/apa-referencing/7JournalArticles
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/in_text_citations_author_authors.html
• ↑ https://bowvalleycollege.libguides.com/c.php?g=714519&p=5093747
• ↑ https://guides.libraries.psu.edu/apaquickguide/intext
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/in_text_citations_the_basics.html
• ↑ https://libguides.southernct.edu/c.php?g=7125&p=34582#1951239
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/reference_list_electronic_sources.html
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/reference_list_articles_in_periodicals.html
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/reference_list_books.html
• ↑ https://morlingcollege.libguides.com/apareferencing/unpublished-or-informally-published-work
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/general_apa_faqs.html
• ↑ https://owl.purdue.edu/owl/research_and_citation/apa_style/apa_formatting_and_style_guide/reference_list_other_print_sources.html

About This Article

To cite a research paper in-text in APA, name the author in the text to introduce the quote and put the publication date for the text in parentheses. At the end of your quote, put the page number in parentheses. If you don’t mention the author in your prose, include them in the citation. Start the citation, which should come at the end of the quote, by listing the author’s last name, the year of publication, and the page number. Make sure to put all of this information in parentheses. If there’s no author, use the name of the organization that published the paper or the first few words from the title. To learn how to cite published and unpublished sources in your reference list, keep reading! Did this summary help you? Yes No

• Send fan mail to authors

Did this article help you?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

• Skip to main content
• Skip to ChatBot Assistant
• Academic Writing
• What is a Research Paper?
• Steps in Writing a Research Paper
• Critical Reading and Writing
• Punctuation
• Writing Exercises
• ELL/ESL Resources

Working with Quotations

Using quotations in a paper.

A research paper blends your own ideas and information from expert sources. It is NOT a series of direct quotations strung together. A common complaint of faculty is that students use too many direct quotes in their papers instead of formulating their own ideas about the paper topic and using quotes rather sparingly as one way to substantiate their point of view on the topic.

Use summaries and paraphrases most often to support your own ideas. Use direct quotations only when the information is so well-presented (or in the interest of clarity, emphasis, or accuracy), that you think the exact language of the source should be used.

Remember that when you do choose to use direct quotations, you need to retain the exact wording, spelling, capitalization, and punctuation of the original source. And remember, too, that just like when using a direct quotation, you must cite your source when summarizing or paraphrasing.

How to Leave Out Part of a Quotation

Yes, you can leave out words you deem unnecessary in a quotation, but you can't take out words that will change its meaning.

For example, if the quotation is "This movie is wonderful drivel," you can't quote it as "This movie is wonderful . . ." and leave out the word "drivel," since it changes the meaning of the quotation.

• Deleting Words at the Start of a Quotation - If you are deleting words at the beginning of a quotation, simply start the quotation at the appropriate place to show that words have been left out: The New York Times reports, however, that screening for cystic fibrosis is "quietly creeping into clinical practice" (Swerdlow 66). [MLA format]*
• Deleting Words in the Middle of a Quotation - To delete words in the middle of a quotation, show that words have been omitted by using ellipses, a series of three periods separated by spaces. For example, the whole quotation is this: "'Human improvement' is a fact of life, not because of the state eugenics committee, but because of consumer demand" (Kevlev 75). [MLA format] If you choose to leave out the middle phrases you could do it this way: "'Human improvement' is a fact of life . . . because of consumer demand" (Kevlev, 1994, 75). [APA format]*
• Deleting Words at the End of a Quotation - If you leave out words at the end of a quotation and the end of the quotation also coincides with the end of your sentence, place the ellipses at the end of your sentence: Today we have the "Republicans, who are more nationalist than socialist, and the Democrats, who are more socialist than nationalist . . . ." (Smith, 1995, 3). [APA format] If you leave out words at the end of a quotation and more of the sentence follows, then simply work the quotation into the structure of your sentence, without using ellipses: Today we have the "Republicans, who are more nationalist than socialist, and the Democrats, who are more socialist than nationalist," thus confirming the dilemma of modern U.S. politics (Smith, 1995, 3). [APA format]

Adding Information to a Quotation

You can add information to a quotation in order to define a word or phrase, to clarify the quotation's information, or to make a brief comment on the quotation's information. The information that you add always should be brief; reserve your major comments on the quotation's information to be placed after the quotation ends.

Show any added information by placing that added information in square brackets within the quote.  You CANNOT substitute parentheses for brackets, since they carry a different meaning. (Parentheses indicate that the added information is part of the direct quotation itself and not your own.)

For example:

Holmes stated that "The chair on which the body was found was covered in a formerly yellow, now a brownish, blood-stained tabaret [upholstery with satin stripes]" (5). [MLA format]

(In this case, you'd need to define "tabaret" for a general reading public.)

"He [William Dean Howells] was 'fierce to shut out' of his study the voices and faces of his family in 'pursuit of the end' which he 'sought gropingly, blindly and with very little hope but with an intense ambition, and a courage that gave way under no burden, before no obstacles'" (Kirk and Kirk xxxvi). [MLA format]

(In this case, you'd need to clarify the person to whom the "he" refers.)

"Stephen Crane's experience as a journalist [as Berryman affirms] provided the impetus for his fiction" (Walcutt 22). [MLA format]

(In this case, the writer provides a brief comment on the information to let the reader know that two major critics of Crane agree.)

Long Quotations

If you decide to use a quotation that is longer than four lines, it is not put in quotation marks but rather block-indented from the left.

Once again remember that you will need to document or show the source of the quotations you use, so make sure that you have recorded all necessary information about the source.

Using a Quote within a Quote

If you need to quote something that already includes a quotation in it, then place the regular "double" quotation marks at the beginning and the end of the complete quotation, and use special "single" quotation marks for the quote within the quote. It looks like this:

"Blake disposes of Menroy's definition of realism, which he calls 'naturalism in disguise'" (Zwerbe 13). [MLA format]   *Notice the different types of formatting indicated after each example. Be sure to follow the correct type (APA, MLA, Chicago, etc.) that your mentor or area of study requires.

Need Assistance?

If you would like assistance with any type of writing assignment, learning coaches are available to assist you. Please contact Academic Support by emailing [email protected].

Questions or feedback about SUNY Empire's Writing Support?

Contact us at [email protected] .

Smart Cookies

They're not just in our classes – they help power our website. Cookies and similar tools allow us to better understand the experience of our visitors. By continuing to use this website, you consent to SUNY Empire State University's usage of cookies and similar technologies in accordance with the university's Privacy Notice and Cookies Policy .

• How it works

How to Quote Sources – Comprehensive Guide With Examples

Published by Olive Robin at October 17th, 2023 , Revised On October 17, 2023

In academia, research, journalism, and writing, the skill of quoting sources is fundamental. Accurate and proper quoting adds credibility to your work and demonstrates respect for the original authors and their ideas. Whether you’re working on a research paper , an essay , or any other form of written communication, understanding how to quote sources is crucial. This comprehensive guide will take you through the ins and outs of quoting, with examples and tips to help you become proficient in citation.

Understanding the Basics of Quoting

Proficiency in the fundamentals of quoting is integral to scholarly writing . This proficiency encompasses the ability to distinguish between primary and secondary sources and the skill of sourcing quotations.

Primary Source Vs. Secondary Source

Before discussing our journey of quoting sources, it’s crucial to distinguish between primary and secondary sources.

Primary Source 

A primary source is direct, firsthand information or an original work. Examples include original research papers, letters, diaries, speeches, and interviews.

Secondary Source 

On the other hand, a secondary source interprets, analyses, or summarises primary sources. It provides commentary or analysis based on primary sources. Examples include books, articles, documentaries, or reviews.

In most cases, it’s preferable to quote from primary sources as they offer the most direct and credible information.

How to Find a Quote Source

Finding the right source to quote is the first step in the quoting process. Here are some tips on how to locate suitable sources:

Online Databases and Libraries

Utilise online databases and library resources like PubMed, JSTOR, Google Scholar, and your university library’s website. These platforms provide access to a vast collection of scholarly materials.

Credible Websites

When searching online, focus on credible websites, such as government agencies, academic institutions, and well-established news outlets. Check for the author’s credentials and the publication date to ensure reliability.

Books and Journals

Physical and digital books and academic journals are excellent sources for quotes. Libraries and digital libraries like Project Gutenberg and the Library of Congress offer extensive collections.

Interviews and Personal Communications

If quoting from an interview or personal communication, ensure you have proper consent from the source. Use these quotes sparingly and only when they add unique value to your work.

How to Quote Sources in a Research Paper

Now that we have laid the foundation, let us explore the specifics of quoting within a research paper.

Inline Quotations

Inline quotations are short snippets of text integrated into your writing. 

Here’s how to format them correctly:

• Use Quotation Marks: Enclose the quoted text in double quotation marks.
• Include Page Numbers: If available, add the page number in parentheses after the quotation.
• Credit the Source: Mention the author’s name and the publication date within or after the quotation.

According to Smith (2020), “Quoting sources properly enhances the credibility of your research” (p. 45).

Block Quoting

When a quote exceeds 40 words or more, it should be formatted as a block quote.  

Follow these guidelines:

• Indentation: Indent the entire quote from the left margin, typically by 0.5 inches.
• Omit Quotation Marks: Block quotes do not require double quotation marks.
• Maintain Spacing: Keep the spacing consistent with the original text.
• Cite Source: Include the author’s name and publication date either before or after the block quote .

Example: Markdown

Smith (2020) highlighted the importance of proper quoting:

    Quoting sources properly enhances the credibility of your research. It shows that you have conducted thorough research and are building upon established knowledge. (p. 45)

Verifying Quotes

In quotes, especially when dealing with secondary sources that include quotes, it’s wise to verify the accuracy of the quoted material. Take the extra step to go back to the original source to ensure that the quote is complete, accurate, and not taken out of context. This diligence is essential for maintaining the integrity of your work.

Using Ellipses and Square Brackets

Quoting often involves adapting source material to fit within your narrative. When omitting words or phrases from a quote, use ellipses (…) to indicate the omission. When adding clarifications or explanations within a quote, enclose them in square brackets [].

These tools allow you to maintain the integrity of the original quote while ensuring it fits smoothly into your text.

Quoting a Source in An Essay

Quoting within an essay follows similar principles to research papers, with minor differences.

Signal Phrases

Signal phrases are used to introduce quotes in your essay. They provide context and indicate that you are incorporating someone else’s ideas. Examples of signal phrases include:

• According to…
• Smith argues that…
• In the words of…

Using signal phrases helps smoothly integrate quotes into your essay’s narrative.

Paraphrasing

While quoting is a valuable skill, it’s worth noting that paraphrasing—expressing someone else’s ideas in your own words—is another essential technique in writing. Paraphrasing allows you to integrate source material smoothly into your text while giving proper credit. When quoting is not necessary, consider paraphrasing as a viable alternative.

How to Cite a Quote: Harvard Style

Citing quotes correctly is crucial to avoiding plagiarism and giving credit to the original source. The Harvard referencing style is one commonly used for citing sources. Here’s how to cite a quote in Harvard style:

In-Text Citation

In-text citations should include the author’s last name, the publication year, and the page number (if applicable) within parentheses. Place this citation immediately after the quote or paraphrased content.

Example: (Smith, 2020, p. 45)

Reference List

In your reference list or bibliography, provide a full citation for each source you’ve quoted or referenced. The Harvard format typically includes the author’s name, publication year, title of the work, publisher, and other relevant information.

Example: scss

Smith, J. (2020). The Art of Quoting. Academic Press.

The research done by our experts have:

• Precision and Clarity
• Zero Plagiarism
• Authentic Sources

Common Mistakes to Avoid when Quoting Sources

Even knowing how to quote sources effectively, it’s easy to make mistakes. Being aware of common pitfalls can help you avoid them. Here are some mistakes to watch out for:

1. Over-Quoting

Quoting should enhance your work, not dominate it. Avoid the temptation to fill your paper with lengthy quotes. Instead, use quotes selectively to support your arguments or provide evidence.

2. Improper Citation

Only accurate or consistent citations can lead to clarity and allegations of plagiarism. Make sure your in-text citations and reference list entries match the citation style required (e.g., Harvard, APA, MLA) and follow the prescribed format.

3. Lack of Context

Quotes should never stand alone; they should fit seamlessly into your narrative. Provide context by introducing the quote, explaining its relevance, and connecting it to your main argument.

4. Not Verifying Quotes

Refrain from relying on secondary sources that misquote or take original quotes out of context can lead to inaccuracies. Always verify quotes fromprimary sources w henever possible.

5. Overlooking Proofreading

Typos, missing punctuation, or formatting errors can detract from the professionalism of your work. Proofread your quotes, citations, and the surrounding text carefully.

Best Practices for Quoting

To ensure your quoting is impeccable, consider these best practices:

• Always attribute quotes to their respective authors.
• Ensure that the quotes you select are relevant and enhance your work’s context.
• Use quotes sparingly, with your voice and analysis dominating the text.
• Double-check the formatting style required by your institution or publication for consistency.
• Proofread to ensure accuracy in quotation marks, citations, and source details.

Online Tools and Resources For Quoting

Consider using online tools and resources to simplify the quoting process and ensure accuracy. Here are a few valuable options:

1. Citation Management Tools

• Zotero: A free, open-source tool that helps you collect, organise, cite, and share research materials.
• EndNote: A reference management program that offers advanced features for organising and citing sources..

2. Online Style Guides

• Purdue OWL: An online writing lab by Purdue University that provides extensive style guides for APA, MLA, Chicago, and more.
• CiteULike: A free service that helps you create and manage citations in various styles.
• Citation Machine: An easy-to-use tool for generating citations in APA, MLA, Chicago, and other styles.

3. Plagiarism Checkers

• Turnitin: A widely used plagiarism detection tool that helps you ensure the originality of your work.
• Grammarly: Besides grammar and spelling checks, Grammarly also offers a plagiarism checker for academic writing.

Integrating these tools and resources into your quoting process allows you to streamline your work and reduce the risk of errors in citations and quotations.

In conclusion, quoting sources is an integral part of academic and professional writing. Understanding the nuances of quoting, finding credible sources, and citing them correctly will elevate the quality of your work. Always prioritise accuracy, attribution, and context when incorporating quotes into your writing.

By following the guidelines and examples provided in this comprehensive guide, you’ll master quoting and enhancing the credibility of your research, essays, and papers. Remember that quoting is not just about using someone else’s words; it’s about building upon the knowledge of others while giving credit where it’s due.

Frequently Asked Questions

How to quote sources in a research paper.

To quote sources in a research paper, use double quotation marks, include an in-text citation with the author’s name and publication year, and integrate the quote smoothly into your text.

How to Cite a Quote?

To cite a quote, provide an in-text citation with the author’s name, publication year, and page number (if applicable), and include a full citation in your reference list following the required citation style.

What Are the Key Differences Between Primary and Secondary Sources in Quoting?

In the context of quoting, primary sources are firsthand accounts or original works, while secondary sources interpret or analyze primary sources. Explain the significance of these distinctions and their impact on effective quoting practices.

You May Also Like

From academic research to personal blogs, the bedrock of trust and credibility is often established by one simple act: source citing. Whether we are constructing a thesis for a graduate program or debunking a myth on a personal blog, providing the origins of our information bolsters our arguments and pays homage to the original creators of that knowledge.

A credible source can be trusted to provide accurate, reliable, and unbiased information. Credible sources are essential for various purposes, including academic research, journalism, decision-making, and gaining knowledge on various topics.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Perspect Med Educ
• v.8(6); 2019 Dec

Beyond the default colon: Effective use of quotes in qualitative research

Lorelei lingard.

Centre for Education Research & Innovation and Department of Medicine, Health Sciences Addition, Schulich School of Medicine & Dentistry, Western University, London, Canada

In the Writer’s Craft section we offer simple tips to improve your writing in one of three areas: Energy, Clarity and Persuasiveness. Each entry focuses on a key writing feature or strategy, illustrates how it commonly goes wrong, teaches the grammatical underpinnings necessary to understand it and offers suggestions to wield it effectively. We encourage readers to share comments on or suggestions for this section on Twitter, using the hashtag: #how’syourwriting?

Last week the ‘e’ key died on my laptop. It’s a first-world problem, I’ll admit, but it really threw my writing for a loop—a lot of words require an ‘e’ key. Reflecting on what other keys I could not do without, I made a quick shortlist: comma, ‘ly’ and colon. The comma because its absence would consign me to the sort of breathy, adolescent writing that fills social media. The ‘ly’ because without that duo I can’t make most of the adverbs that prop up my first drafts. And the colon because I’m a qualitative researcher. How would I introduce quotes if the colon key were out of order?

I’m only partly joking. Every qualitative researcher confronts the challenge of selecting the right quotes and integrating them effectively into their manuscripts. As writers, we are all guilty of resorting to the default colon as an easy way to tuck quotes into our sentences; as readers, we have all suffered through papers that read like a laundry list of quotes rather than a story about what the writer learned. This Writer’s Craft instalment offers suggestions to help you choose the right quotes and integrate them with coherence and style, following the principles of authenticity and argument.

Authenticity

At the point of manuscript writing, a qualitative researcher is swimming in a sea of data. Innumerable transcript excerpts have been copied and pasted into data analysis software or (for the more tactile among us) onto multi-coloured sticky notes. Some of these excerpts we like very much. However, very few of them will make it into the final manuscript, particularly if we are writing for publication in a health research or medical education journal, with their 3000–4000 word limits.

Selecting the best quotes from among these cherished excerpts is harder than it looks. We should be guided by the principle of authenticity: does the quote offer readers first hand access to dominant patterns in the data? There are three parts to selecting a good, authentic quote: the quote is illustrative of the point the writer is making about the data, it is reasonably succinct, and it is representative of the patterns in data. Consider this quote, introduced with a short phrase to orient the reader:

Rather than feeling they were changing identities as they went through their training, medical students described the experience of accumulating and reconciling multiple identities: ‘the “life me”, who I was when I started this, is still here, but now there’s also, like, a “scientific me” as well as a sort of “doctor me”. And I’m trying to be all of that’ (S15) .

This quote is illustrative, providing an explicit example of the point that student identity is multiplying as training unfolds. It is succinct, expressing efficiently what other participants took pages to describe. And it is representative, remaining faithful to the overall sentiments of the many participants reporting this idea.

We have all read—and written!—drafts in which the quoted material does not reflect these characteristics. The remainder of this section addresses these recurring problems.

Is the quote illustrative?

A common challenge is the quote that illustrates the writer’s point implicitly, but not explicitly. Consider this example:

Medical students are undergoing a process of identity-negotiation: we’re ‘learning so much all the time, and some of it is the science stuff and some of it is professional or, like, practical ethical things, and we have to figure all that out’ (S2).

For this quote to serve as evidence for the point of identity-negotiation, the reader must infer that ‘figure all that out’ is a reference to this process. But readers may read their own meaning into decontextualized transcript extracts. Explicit is better, even if it sacrifices succinctness. In fact, this is the right quote, but we had trimmed away the first three sentences where ‘figuring out identity’ got explicit mention. The quote could be lengthened to include these sentences, or, to preserve succinctness, just that quoted phrase can be inserted into the introduction to the quote:

Medical students are ‘figuring out identity’, a process of negotiation in which they are ‘learning so much all the time, and some of it is the science stuff and some of it is professional or, like, practical ethical things, and we have to figure all that out’ (S2).

Is the quote succinct?

Interview transcripts are characterized by meandering and elliptical or incomplete speech. Therefore, you can search diligently and still come up with a 200-word quote to illustrate your 10-word point. Sometimes the long quote is perfect and you should include it. Often, however, you need to tighten it up. By including succinctness as part of the authenticity principle, my aim is to remind writers to explicitly consider whether their tightening up retains the gist of the quote.

The previous example illustrates one tightening technique: extract key phrases and integrate them into your own, introductory sentence to the quote. Another solution is to use the ellipsis to signal that you have cut part of the quote out:

Identity formation in the clinical environment is also influenced by materials and tools, ‘all this stuff you’ve never used before … you don’t know where it is or how to use it, and don’t even get me started on the computerized record. … So many hours and I’m still confused, am I ever going to know where to enter things?’ (S7) .

The first ellipsis signals that something mid-sentence has been removed. In this case, this missing material was an elaboration of ‘all this stuff’ that mentioned other details not relevant to the point being made. The second ellipsis follows a period, and therefore signals that at least one sentence has been removed and perhaps more. When using an ellipsis, only remove material that is irrelevant to the meaning of the quote, not relevant material that importantly nuances the meaning of the quote. The goal is not a bricolage which cuts and pastes tiny bits so that participants say what you want them to; it is a succinct-enough representation that remains faithful to the participant’s intended meaning.

Changing the wording of a quotation always risks violating the authenticity principle, so writers must do it thoughtfully. Two other situations, however, may call for this approach: to maintain the grammatical integrity of your sentence and to tidy up oral speech 1 . The first is usually not problematic, particularly if you are altering for consistent tense or for agreement of verb and subject or pronoun and antecedent, or replacing a pronoun with its referent. Square brackets signal such changes:

Participants from the community hospital setting, however, ‘[challenged] the assumption of anonymity when evaluating teachers’. (verb tense changed from present to past)

The second situation can be trickier: when should you tidy up the messiness of conversational discourse? Interview transcripts are replete with what linguists refer to as ‘fillers’ or ‘hesitation markers’, sounds and words such as ‘ah/uh/um/like/you know/right’ [ 1 ]. There is general agreement among qualitative scholars that quotes should be presented verbatim as much as possible, and those engaged in discourse and narrative analysis will necessarily analyze such hesitations as part of the meaning. In other applied social research methodologies, however, writers might do some ‘light tidying up’ both for readability and for ethical reasons, as long as they do not undermine authenticity in doing so [ 2 ]. Ethical issues include the desire not to do a disservice to participants by representing the um’s and ah’s of their natural speech, and the concern to protect participant anonymity by removing identifiable linguistic features such as regional or accented speech.

Finally, an emerging strategy for succinctness is to put the quotes into a table. Many qualitative researchers resent the constraints of the table format as an incursion from the quantitative realm. However, used thoughtfully, it can offer a means of presenting complex results efficiently. In this example, Goldszmidt et al. name, define and illustrate five main types of supervisor interruptions that they observed during their study of case review on internal medicine teaching teams (Tab.  1 ; [ 3 ]).

Types of supervisors’ interruptions during patient case review presentations, London Health Sciences Centre, University Hospital, Ontario, Canada 2010

AM  indicates morning case presentation; PM  overnight case presentation; A  attending physician; SR  senior resident; IM1  first-year internal medicine resident; FM1  first-year family medicine resident; CC  clinical clerk

This is a nice example of how ‘Tab.  1 ’, conventionally used in quantitative research papers for demographic details of the research sample, can be re-conceptualized to feature the key findings from a qualitative analysis. Tables should be supplemented, however, with narrative explanation in which the writer contextualizes and interprets the quoted material. More on this in the section on Argument.

Is the quote representative?

We have all been tempted to include the highly provocative quote (that thing we cannot believe someone said on tape), only to realize by the third draft that it misrepresents the data and must be relinquished. Quote selection should reflect strong patterns in the data; while discrepant examples serve an important purpose, their use should be purposeful and explicit. Your quote selection should also be distributed across participants, in order that you represent the data set. This may mean using the second- or third-best example rather than continuing to quote the same one or two highly articulate individuals.

You must provide sufficient context that readers can accurately infer the meaning of the quote. Sometimes this means including the interviewer’s question as well as the participant’s answer. In focus group research, where the emphasis is on the group discussion, it might be necessary to quote an exchange among participants rather than extracting individual comments. This example illustrates this technique:

Interviewer: And, in your experience, how do the students respond to your feedback about how well they communicated? SP1: Oh, really well, it’s really important to the students, they listen to what we say about their performance— Interruption with overlapping talk SP4: Well, yeah, on a good day maybe, sure. But not every time. Lots of sessions I feel like we’re probably more like props to them, so how well we think they did, I’m not sure that matters. SP3: Don’t you find it depends on the student? (FG2)

Of course, such a long excerpt threatens the goal of succinctness. Alternatively, you could use multiple quotes from this excerpt in a single sentence of your own:

Some standardized patients in the group believed that their assessor role was ‘really important to the students, they listen to what we say about their performance’, while others argued that ‘we’re probably more like props to them, so how well we think they did, I’m not sure that matters’. (FG2)

Sometimes a quote is representative but also, therefore, identifiable, jeopardizing confidentiality:

One participant explained that, ‘as chair of the competency committee, I prioritize how we spend our time. So that we can pay sufficient attention to this 2nd year resident. She’s supposed to be back from maternity leave but she had complications so her rotations need some altering for her to manage.’ (CCC4, P2)

In this case, the convention of using a legend (Clinical Competency Committee 4, participant 2) to attribute the quote may be insufficient to protect anonymity. If the study involves few programs and the methods identify them (e.g., Paediatrics and Medicine) and name the institution (e.g., Western University), the speaker may be identifiable to some readers, as may the resident.

Quoted material does not stand on its own: we must incorporate it into our texts, both grammatically and rhetorically. Grammatical incorporation is relatively straightforward, with one main rule to keep in mind: quoted material is subject to the same sentence-level conventions for grammar and punctuation as non-quoted material. Read this example aloud:

Arts and humanities teaching offers an opportunity for faculty to connect with medical students on a different level, ‘we can share how we feel about the work of caring, what it costs us, how it rewards us, as human beings’ (F9).

Your ear likely hears that this should be two sentences. But quotation marks seem to distract us from this, and we create a run-on sentence by putting a comma between the sentences. An easy correction is to replace the comma with a colon.

Arts and humanities teaching offers an opportunity for faculty to connect with medical students on a different level: ‘we can share how we feel about the work of caring, what it costs us, how it rewards us, as human beings’ (F9).

Many writers rely on the colon as their default mechanism for integrating quoted material. However, while it is often grammatically accurate, it is not always rhetorically sufficient. That is, the colon doesn’t contextualize, it doesn’t interpret. Instead, it ‘drops’ the quote in and leaves the reader to infer how the quoted material illustrates or advances the argument. This is problematic because it does not fulfil the requirement for adequacy of interpretation in presenting qualitative results. As Morrow argues, writers should aim for a balance of their interpretations and supporting quotations: ‘an overemphasis on the researcher’s interpretations at the cost of participant quotes will leave the reader in doubt as to just where the interpretations came from; an excess of quotes will cause the reader to become lost in the morass of stories’ [ 4 ]. (p. 256).

There are many techniques for achieving this balance between researcher interpretations and supporting quotations. Some techniques retain the default colon but attend carefully to the material that precedes it. Consider the following examples:

One clinician said: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) One clinician argued: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) One clinician in the focus group disagreed with the idea that entrustment was about deciding trainee progress: ‘Entrustment isn’t a decision, it’s a relationship’. (F21) Focus group participants debated the meaning of entrustment. Many described it matter-of-factly as ‘the process we use to decide whether the trainee should progress’, while a few argued that ‘entrustment isn’t a decision, it’s a relationship’. (F21)

These examples offer progressively more contextualization for the quote. The first example simply drops the quote in following the nondescript verb, ‘said’, offering no interpretive gloss and therefore exerting minimal rhetorical control over the reader. The second offers some context via the verb ‘argued’, which interprets the participant’s positioning or tone. The third interprets the meaning of the quote even more by situating it in the context of a focus group debate. And the fourth eschews the default colon entirely, integrating two quotes into the narrative structure of the author’s sentence to illustrate the dominant and the discrepant positions on entrustment in this focus group debate.

Integrating quotes into the narrative structure of your sentence, like the last example, offers two advantages to the writer. First, it interprets the quote for the reader and therefore exerts strong rhetorical control over the quote’s meaning. Second, it offers variety and style. If your goal is compelling prose, variety and style should not be underestimated. We have all had the experience of reading Results sections that proceed robotically: point-colon-quote, point-colon-quote, point-colon-quote …. If only to make the reader’s experience more enjoyable, your revision process should involve converting some of these to integrated narration.

Notwithstanding the goal of succinctness, sometimes you will include a longer quote because it beautifully illustrates the point. However, a long quote may offer opportunities for readers to focus on images or phrases other than those you intended, therefore creating incoherence in the argument you are making about your results. To guard against this, you might try the ‘quotation sandwich’ technique [ 5 ] of both an introductory phrase that sets up the context of the quote and a summary statement following it emphasizing why you consider it important and what you are using it to illustrate.

Finally, how many quotes do you need to support your point? More is not necessarily better. One quote should be sufficient to illustrate your point. Some points in your argument may not require a quoted excerpt at all. Consider this example, in which the first sentence presents a finding that is not illustrated with a quotation:

Residents described themselves as being always tired. However, their perceptions of the impact of their fatigue varied, from ‘not a factor in the care I provide’ (R8) to ‘absolutely killing me … I’m falling asleep at the bedside’ (R15).

The finding that residents are always tired does not require illustration. It is readily understandable and will not surprise anyone; therefore, following it with the quote ‘I’m tired all the time’ (R2) will feel redundant. The second part of the finding, however, benefits from illustration to show the variety of perception regarding impact.

If you do use multiple quotes to illustrate a point in your argument, then you must establish the relations between them for the reader. You can do this between the quoted excerpts or after them, as modelled above with the four examples used to illustrate progressively stronger quote contextualization.

In conclusion, quotes can be the life’s blood of your qualitative research paper. However, they are the evidence, not the argument. They do not speak for themselves and readers cannot infer what you intend them to illustrate. The authenticity principle can help you select a quote that is illustrative, succinct and representative, while the argument principle can remind you to attend to the grammatical and the rhetorical aspects of integrating the quote into the story you are telling about your research.

1 A third situation is beyond the scope of this piece: translating quoted material from another language into English. For careful consideration of this issue, please see Helmich et al. [ 6 ].

• Walden University
• Faculty Portal

Academic Skills: Writing: Reusing Your Work and Citing Yourself

As you progress in your Walden program, you may find that you research and write about a topic more than once. This is typical as you engage with key concepts and specialize in your field of study. See the information and best practices on this page to ensure you follow APA citation guidelines and Walden policy if you plan to reuse past written work.

Your Published Writing

If you have published your writing outside of the Walden classroom—in a journal or even in a local newsletter or blog—and would like to reuse portions of it or refer to the findings or ideas in that work, you will need to cite yourself.

Follow APA’s guidelines for citing and referencing published works.

Your Previous Coursework

If you are considering reusing your previously submitted Walden coursework in a new course or term, review the following best practice and policy sections.

Best Practices for Reusing Work

• During your studies at Walden, you may write on the same topic for a second, third, or fourth time; regardless, your writing should reflect new approaches and insights into that topic to demonstrate intellectual growth.
• Your writing submitted for previous Walden courses will show up in the Turnitin Similarity Report when reused. Contact your faculty if you plan to reuse your work to avoid concerns about possible plagiarism. Additionally, you could cite your unpublished writing (see How to Cite Your Unpublished Work below).
• Your faculty for your current course can guide you about whether reusing your previous writing seems appropriate for a particular assignment or writing task.

Walden University’s Policy on Reusing Work

The following comes from the Walden Student Code of Conduct :

Walden Students’ Use of Their Own Scholarly Work

• Students may reuse their work without an expectation that previously awarded grades or credit will attach to the new assignment. Any work previously published by the student must be appropriately cited if reused. 
• Field Experience Exception: Any assignments or documentation submitted related to field experience (work, hours, client or patient logs, etc) must be new, current, accurate, and relate to clients or patients seen during the term and in direct reference to the assignment.

How to Cite Your Unpublished Work

Although not required in the policy above, in rare instances, you may need to or want to cite your unpublished Walden coursework.

If you cite or quote your previous work, treat yourself as the author and your own written document as the source. For example, if Marie Briggs wanted to cite a paper she wrote at Walden in 2022, her citation might look like this:

Briggs (2022) asserted that previous literature on the psychology of tightrope walkers was faulty in that it "presumed that risk-taking behaviors align neatly with certain personality traits or disorders" (p. 4).

And in the reference list:

Briggs, M. (2022). An analysis of personality theory [Unpublished manuscript]. Walden University.

Multimedia Resources

• The Northwest Passage, or Why You Should Cite Yourself Only Sparingly (blog post)
• To Cite Yourself or Not Cite Yourself (blog post)
• Office of Student Disability Services

Walden Resources

Departments.

• Academic Residencies
• Academic Skills
• Career Planning and Development
• Customer Care Team
• Field Experience
• Military Services
• Student Success Advising
• Writing Skills

Centers and Offices

• Center for Social Change
• Office of Academic Support and Instructional Services
• Office of Degree Acceleration
• Office of Research and Doctoral Services
• Office of Student Affairs

Student Resources

• Doctoral Writing Assessment
• Form & Style Review
• Quick Answers
• ScholarWorks
• SKIL Courses and Workshops
• Walden Bookstore
• Walden Catalog & Student Handbook
• Student Safety/Title IX
• Legal & Consumer Information
• Website Terms and Conditions
• Cookie Policy
• Accessibility
• Accreditation
• State Authorization
• Net Price Calculator
• Contact Walden

Walden University is a member of Adtalem Global Education, Inc. www.adtalem.com Walden University is certified to operate by SCHEV © 2024 Walden University LLC. All rights reserved.

• Discoveries
• Right Journal
• Journal Metrics
• Journal Fit
• Abbreviation
• In-Text Citations
• Bibliographies
• Writing an Article
• Peer Review Types
• Acknowledgements
• Withdrawing a Paper
• Form Letter
• ISO, ANSI, CFR
• Google Scholar
• Journal Manuscript Editing
• Research Manuscript Editing

Book Editing

• Manuscript Editing Services

Medical Editing

• Bioscience Editing
• Physical Science Editing
• PhD Thesis Editing Services
• PhD Editing
• Master’s Proofreading
• Bachelor’s Editing
• Dissertation Proofreading Services
• Best Dissertation Proofreaders
• Masters Dissertation Proofreading
• PhD Proofreaders
• Proofreading PhD Thesis Price
• Journal Article Editing
• Book Editing Service
• Editing and Proofreading Services
• Research Paper Editing
• Medical Manuscript Editing
• Academic Editing
• Social Sciences Editing
• Academic Proofreading
• PhD Theses Editing
• Dissertation Proofreading
• Proofreading Rates UK
• Medical Proofreading
• PhD Proofreading Services UK
• Academic Proofreading Services UK

Medical Editing Services

• Life Science Editing
• Biomedical Editing
• Environmental Science Editing
• Pharmaceutical Science Editing
• Economics Editing
• Psychology Editing
• Sociology Editing
• Archaeology Editing
• History Paper Editing
• Anthropology Editing
• Law Paper Editing
• Engineering Paper Editing
• Technical Paper Editing
• Philosophy Editing
• PhD Dissertation Proofreading
• Lektorat Englisch
• Akademisches Lektorat
• Lektorat Englisch Preise
• Wissenschaftliches Lektorat
• Lektorat Doktorarbeit

PhD Thesis Editing

• Thesis Proofreading Services
• PhD Thesis Proofreading
• Proofreading Thesis Cost
• Proofreading Thesis
• Thesis Editing Services
• Professional Thesis Editing
• Thesis Editing Cost
• Proofreading Dissertation
• Dissertation Proofreading Cost
• Dissertation Proofreader
• Correção de Artigos Científicos
• Correção de Trabalhos Academicos
• Serviços de Correção de Inglês
• Correção de Dissertação
• Correção de Textos Precos
• 定額 ネイティブチェック
• Copy Editing
• FREE Courses
• Revision en Ingles
• Revision de Textos en Ingles
• Revision de Tesis
• Revision Medica en Ingles
• Revision de Tesis Precio
• Revisão de Artigos Científicos
• Revisão de Trabalhos Academicos
• Serviços de Revisão de Inglês
• Revisão de Dissertação
• Revisão de Textos Precos
• Corrección de Textos en Ingles
• Corrección de Tesis
• Corrección de Tesis Precio
• Corrección Medica en Ingles
• Corrector ingles

Select Page

How To Quote Sources In Research Papers

Posted by Rene Tetzner | Apr 14, 2021 | Referencing & Bibliographies | 0 |

How To Quote Sources In Research Papers The idea behind using the exact words of another person or other people in academic or scientific writing is that those words contribute to your argument. They may support or contradict your methods, results or conclusions; they may be selected from a text or texts that you analyse in detail; they may be exemplary, pithy or perfect expressions of ideas you introduce and discuss. Whatever your reasons for quoting the words of others in your own writing are, you need to quote them with the utmost accurately and observe with precision and consistency the appropriate scholarly techniques for quoting sources.

Accuracy while quoting the words of another author or speaker is a matter of care and attention when initially adding the information to your own writing and again when checking it against the original, which should be done more than once with more than one set of eyes if possible. Errors creep into quoted material with alarming frequency, so it is wise never to assume that quotations are correct. If you make errors, you are not only compromising your work, but also misrepresenting the author you are quoting. Whether you agree or not with what he or she wrote or said is irrelevant, but recording quotations inaccurately and arguing your case on the basis of erroneous information is unethical and unprofessional and it can certainly undermine the very argument you intend to support.

Whenever material is directly quoted from a source, the text must be formatted in such a way that it is clear to the reader exactly which words are borrowed. When quotations are short and embedded in your main text, they should appear in the font size you are using for your own prose and must be enclosed in quotation marks. Single (‘’) or double (“”) quotation marks will work, with the guidelines you are following or your personal preference the determining factor, but the same type must be used for every direct quotation. The other type can then be used for any quotations that appear within quoted material – double marks within single ones and single within double – and these, too, must be used consistently in every relevant instance.

Longer prose quotations or quotations from poetry are usually set off as block quotations, generally with indentation, at least on the left margin, and often in a slighter smaller font than the main text of a document. In such cases, no quotation marks are necessary because the block format indicates which words are borrowed. Whether you are using quotation marks or block quotation, remember that italic font is not a correct format for indicating quoted material in academic and scientific writing in the English language. Italics should therefore only be used when and where the author you are quoting used them or when you wish to emphasise certain words within a quotation, in which case the italics should be acknowledged as added by the quoting author.

Finally, every quotation should be accompanied by a reference to the source, usually in the style indicated by the author instructions of the anticipated publisher. Whether that reference is parenthetical, numerical or included in a footnote or endnote, a page number indicating exactly where the reader can find the quotation should be included.

You might be interested in Services offered by Proof-Reading-Service.com

Journal editing.

Journal article editing services

PhD thesis editing services

Scientific Editing

Manuscript editing.

Manuscript editing services

Expert Editing

Expert editing for all papers

Research Editing

Research paper editing services

Professional book editing services

Related Posts

How To Cite ISO, ANSI, CFR & Other Industry Standards & Guidelines

September 12, 2021

How To Write an Annotated Bibliography

August 3, 2021

Abbreviating References to Specific Pages in Source Texts

August 1, 2021

How To Cite a Research Paper & Provide a Bibliographical Reference

July 29, 2021

Our Recent Posts

Our review ratings

• Examples of Research Paper Topics in Different Study Areas Score: 98%
• Dealing with Language Problems – Journal Editor’s Feedback Score: 95%
• Making Good Use of a Professional Proofreader Score: 92%
• How To Format Your Journal Paper Using Published Articles Score: 95%
• Journal Rejection as Inspiration for a New Perspective Score: 95%

Explore our Categories

• Abbreviation in Academic Writing (4)
• Career Advice for Academics (5)
• Dealing with Paper Rejection (11)
• Grammar in Academic Writing (5)
• Help with Peer Review (7)
• How To Get Published (146)
• Paper Writing Advice (17)
• Referencing & Bibliographies (16)

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Citing sources
• How to Cite a Website | MLA, APA & Chicago Examples

How to Cite a Website | MLA, APA & Chicago Examples

Published on March 5, 2021 by Jack Caulfield . Revised on January 17, 2024.

To cite a page from a website, you need a short in-text citation and a corresponding reference stating the author’s name, the date of publication, the title of the page, the website name, and the URL.

This information is presented differently in different citation styles. APA , MLA , and Chicago are the most commonly used styles.

Use the interactive example generator below to explore APA and MLA website citations.

Note that the format is slightly different for citing YouTube and other online video platforms, or for citing an image .

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Citing a website in mla style, citing a website in apa style, citing a website in chicago style, frequently asked questions about citations.

An MLA Works Cited entry for a webpage lists the author’s name , the title of the page (in quotation marks), the name of the site (in italics), the date of publication, and the URL.

The in-text citation usually just lists the author’s name. For a long page, you may specify a (shortened) section heading to locate the specific passage. Don’t use paragraph numbers unless they’re specifically numbered on the page.

The same format is used for blog posts and online articles from newspapers and magazines.

You can also use our free MLA Citation Generator to generate your website citations.

Generate accurate MLA citations with Scribbr

Citing a whole website.

When you cite an entire website rather than a specific page, include the author if one can be identified for the whole site (e.g. for a single-authored blog). Otherwise, just start with the site name.

List the copyright date displayed on the site; if there isn’t one, provide an access date after the URL.

Webpages with no author or date

When no author is listed, cite the organization as author only if it differs from the website name.

If the organization name is also the website name, start the Works Cited entry with the title instead, and use a shortened version of the title in the in-text citation.

When no publication date is listed, leave it out and include an access date at the end instead.

Scribbr Citation Checker New

The AI-powered Citation Checker helps you avoid common mistakes such as:

• Missing commas and periods
• Incorrect usage of “et al.”
• Ampersands (&) in narrative citations
• Missing reference entries

An APA reference for a webpage lists the author’s last name and initials, the full date of publication, the title of the page (in italics), the website name (in plain text), and the URL.

The in-text citation lists the author’s last name and the year. If it’s a long page, you may include a locator to identify the quote or paraphrase (e.g. a paragraph number and/or section title).

Note that a general reference to an entire website doesn’t require a citation in APA Style; just include the URL in parentheses after you mention the site.

You can also use our free APA Citation Generator to create your webpage citations. Search for a URL to retrieve the details.

Generate accurate APA citations with Scribbr

Blog posts and online articles.

Blog posts follow a slightly different format: the title of the post is not italicized, and the name of the blog is.

The same format is used for online newspaper and magazine articles—but not for articles from news sites like Reuters and BBC News (see the previous example).

When a page has no author specified, list the name of the organization that created it instead (and omit it later if it’s the same as the website name).

When it doesn’t list a date of publication, use “n.d.” in place of the date. You can also include an access date if the page seems likely to change over time.

In Chicago notes and bibliography style, footnotes are used to cite sources. They refer to a bibliography at the end that lists all your sources in full.

A Chicago bibliography entry for a website lists the author’s name, the page title (in quotation marks), the website name, the publication date, and the URL.

Chicago also has an alternative author-date citation style . Examples of website citations in this style can be found here .

For blog posts and online articles from newspapers, the name of the publication is italicized. For a blog post, you should also add the word “blog” in parentheses, unless it’s already part of the blog’s name.

When a web source doesn’t list an author , you can usually begin your bibliography entry and short note with the name of the organization responsible. Don’t repeat it later if it’s also the name of the website. A full note should begin with the title instead.

When no publication or revision date is shown, include an access date instead in your bibliography entry.

The main elements included in website citations across APA , MLA , and Chicago style are the author, the date of publication, the page title, the website name, and the URL. The information is presented differently in each style.

In APA , MLA , and Chicago style citations for sources that don’t list a specific author (e.g. many websites ), you can usually list the organization responsible for the source as the author.

If the organization is the same as the website or publisher, you shouldn’t repeat it twice in your reference:

• In APA and Chicago, omit the website or publisher name later in the reference.
• In MLA, omit the author element at the start of the reference, and cite the source title instead.

If there’s no appropriate organization to list as author, you will usually have to begin the citation and reference entry with the title of the source instead.

When you want to cite a specific passage in a source without page numbers (e.g. an e-book or website ), all the main citation styles recommend using an alternate locator in your in-text citation . You might use a heading or chapter number, e.g. (Smith, 2016, ch. 1)

In APA Style , you can count the paragraph numbers in a text to identify a location by paragraph number. MLA and Chicago recommend that you only use paragraph numbers if they’re explicitly marked in the text.

For audiovisual sources (e.g. videos ), all styles recommend using a timestamp to show a specific point in the video when relevant.

Check if your university or course guidelines specify which citation style to use. If the choice is left up to you, consider which style is most commonly used in your field.

• APA Style is the most popular citation style, widely used in the social and behavioral sciences.
• MLA style is the second most popular, used mainly in the humanities.
• Chicago notes and bibliography style is also popular in the humanities, especially history.
• Chicago author-date style tends to be used in the sciences.

Other more specialized styles exist for certain fields, such as Bluebook and OSCOLA for law.

The most important thing is to choose one style and use it consistently throughout your text.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Caulfield, J. (2024, January 17). How to Cite a Website | MLA, APA & Chicago Examples. Scribbr. Retrieved April 1, 2024, from https://www.scribbr.com/citing-sources/cite-a-website/

Is this article helpful?

Jack Caulfield

Other students also liked, how to cite an image | photographs, figures, diagrams, how to cite a lecture | apa, mla & chicago examples, how to cite a youtube video | mla, apa & chicago, what is your plagiarism score.