how to write a dissertation aim

Aims and Objectives – A Guide for Academic Writing
Doing a PhD

One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and your reader clarity, with your aims indicating what is to be achieved, and your objectives indicating how it will be achieved.

Introduction

There is no getting away from the importance of the aims and objectives in determining the success of your research project. Unfortunately, however, it is an aspect that many students struggle with, and ultimately end up doing poorly. Given their importance, if you suspect that there is even the smallest possibility that you belong to this group of students, we strongly recommend you read this page in full.

This page describes what research aims and objectives are, how they differ from each other, how to write them correctly, and the common mistakes students make and how to avoid them. An example of a good aim and objectives from a past thesis has also been deconstructed to help your understanding.

What Are Aims and Objectives?

Research aims.

A research aim describes the main goal or the overarching purpose of your research project.

In doing so, it acts as a focal point for your research and provides your readers with clarity as to what your study is all about. Because of this, research aims are almost always located within its own subsection under the introduction section of a research document, regardless of whether it’s a thesis , a dissertation, or a research paper .

A research aim is usually formulated as a broad statement of the main goal of the research and can range in length from a single sentence to a short paragraph. Although the exact format may vary according to preference, they should all describe why your research is needed (i.e. the context), what it sets out to accomplish (the actual aim) and, briefly, how it intends to accomplish it (overview of your objectives).

To give an example, we have extracted the following research aim from a real PhD thesis:

Example of a Research Aim

The role of diametrical cup deformation as a factor to unsatisfactory implant performance has not been widely reported. The aim of this thesis was to gain an understanding of the diametrical deformation behaviour of acetabular cups and shells following impaction into the reamed acetabulum. The influence of a range of factors on deformation was investigated to ascertain if cup and shell deformation may be high enough to potentially contribute to early failure and high wear rates in metal-on-metal implants.

Note: Extracted with permission from thesis titled “T he Impact And Deformation Of Press-Fit Metal Acetabular Components ” produced by Dr H Hothi of previously Queen Mary University of London.

Research Objectives

Where a research aim specifies what your study will answer, research objectives specify how your study will answer it.

They divide your research aim into several smaller parts, each of which represents a key section of your research project. As a result, almost all research objectives take the form of a numbered list, with each item usually receiving its own chapter in a dissertation or thesis.

Following the example of the research aim shared above, here are it’s real research objectives as an example:

Example of a Research Objective

Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.
Investigate the number, velocity and position of impacts needed to insert a cup.
Determine the relationship between the size of interference between the cup and cavity and deformation for different cup types.
Investigate the influence of non-uniform cup support and varying the orientation of the component in the cavity on deformation.
Examine the influence of errors during reaming of the acetabulum which introduce ovality to the cavity.
Determine the relationship between changes in the geometry of the component and deformation for different cup designs.
Develop three dimensional pelvis models with non-uniform bone material properties from a range of patients with varying bone quality.
Use the key parameters that influence deformation, as identified in the foam models to determine the range of deformations that may occur clinically using the anatomic models and if these deformations are clinically significant.

It’s worth noting that researchers sometimes use research questions instead of research objectives, or in other cases both. From a high-level perspective, research questions and research objectives make the same statements, but just in different formats.

Taking the first three research objectives as an example, they can be restructured into research questions as follows:

Restructuring Research Objectives as Research Questions

Can finite element models using simplified experimentally validated foam models to represent the acetabulum together with explicit dynamics be used to mimic mallet blows during cup/shell insertion?
What is the number, velocity and position of impacts needed to insert a cup?
What is the relationship between the size of interference between the cup and cavity and deformation for different cup types?

Difference Between Aims and Objectives

Hopefully the above explanations make clear the differences between aims and objectives, but to clarify:

The research aim focus on what the research project is intended to achieve; research objectives focus on how the aim will be achieved.
Research aims are relatively broad; research objectives are specific.
Research aims focus on a project’s long-term outcomes; research objectives focus on its immediate, short-term outcomes.
A research aim can be written in a single sentence or short paragraph; research objectives should be written as a numbered list.

How to Write Aims and Objectives

Before we discuss how to write a clear set of research aims and objectives, we should make it clear that there is no single way they must be written. Each researcher will approach their aims and objectives slightly differently, and often your supervisor will influence the formulation of yours on the basis of their own preferences.

Regardless, there are some basic principles that you should observe for good practice; these principles are described below.

Your aim should be made up of three parts that answer the below questions:

Why is this research required?
What is this research about?
How are you going to do it?

The easiest way to achieve this would be to address each question in its own sentence, although it does not matter whether you combine them or write multiple sentences for each, the key is to address each one.

The first question, why , provides context to your research project, the second question, what , describes the aim of your research, and the last question, how , acts as an introduction to your objectives which will immediately follow.

Scroll through the image set below to see the ‘why, what and how’ associated with our research aim example.

Note: Your research aims need not be limited to one. Some individuals per to define one broad ‘overarching aim’ of a project and then adopt two or three specific research aims for their thesis or dissertation. Remember, however, that in order for your assessors to consider your research project complete, you will need to prove you have fulfilled all of the aims you set out to achieve. Therefore, while having more than one research aim is not necessarily disadvantageous, consider whether a single overarching one will do.

Research Objectives

Each of your research objectives should be SMART :

Specific – is there any ambiguity in the action you are going to undertake, or is it focused and well-defined?
Measurable – how will you measure progress and determine when you have achieved the action?
Achievable – do you have the support, resources and facilities required to carry out the action?
Relevant – is the action essential to the achievement of your research aim?
Timebound – can you realistically complete the action in the available time alongside your other research tasks?

In addition to being SMART, your research objectives should start with a verb that helps communicate your intent. Common research verbs include:

Table of Research Verbs to Use in Aims and Objectives

Last, format your objectives into a numbered list. This is because when you write your thesis or dissertation, you will at times need to make reference to a specific research objective; structuring your research objectives in a numbered list will provide a clear way of doing this.

To bring all this together, let’s compare the first research objective in the previous example with the above guidance:

Checking Research Objective Example Against Recommended Approach

Research Objective:

1. Develop finite element models using explicit dynamics to mimic mallet blows during cup/shell insertion, initially using simplified experimentally validated foam models to represent the acetabulum.

Checking Against Recommended Approach:

Q: Is it specific? A: Yes, it is clear what the student intends to do (produce a finite element model), why they intend to do it (mimic cup/shell blows) and their parameters have been well-defined ( using simplified experimentally validated foam models to represent the acetabulum ).

Q: Is it measurable? A: Yes, it is clear that the research objective will be achieved once the finite element model is complete.

Q: Is it achievable? A: Yes, provided the student has access to a computer lab, modelling software and laboratory data.

Q: Is it relevant? A: Yes, mimicking impacts to a cup/shell is fundamental to the overall aim of understanding how they deform when impacted upon.

Q: Is it timebound? A: Yes, it is possible to create a limited-scope finite element model in a relatively short time, especially if you already have experience in modelling.

Q: Does it start with a verb? A: Yes, it starts with ‘develop’, which makes the intent of the objective immediately clear.

Q: Is it a numbered list? A: Yes, it is the first research objective in a list of eight.

Mistakes in Writing Research Aims and Objectives

1. making your research aim too broad.

Having a research aim too broad becomes very difficult to achieve. Normally, this occurs when a student develops their research aim before they have a good understanding of what they want to research. Remember that at the end of your project and during your viva defence , you will have to prove that you have achieved your research aims; if they are too broad, this will be an almost impossible task. In the early stages of your research project, your priority should be to narrow your study to a specific area. A good way to do this is to take the time to study existing literature, question their current approaches, findings and limitations, and consider whether there are any recurring gaps that could be investigated .

Note: Achieving a set of aims does not necessarily mean proving or disproving a theory or hypothesis, even if your research aim was to, but having done enough work to provide a useful and original insight into the principles that underlie your research aim.

2. Making Your Research Objectives Too Ambitious

Be realistic about what you can achieve in the time you have available. It is natural to want to set ambitious research objectives that require sophisticated data collection and analysis, but only completing this with six months before the end of your PhD registration period is not a worthwhile trade-off.

3. Formulating Repetitive Research Objectives

Each research objective should have its own purpose and distinct measurable outcome. To this effect, a common mistake is to form research objectives which have large amounts of overlap. This makes it difficult to determine when an objective is truly complete, and also presents challenges in estimating the duration of objectives when creating your project timeline. It also makes it difficult to structure your thesis into unique chapters, making it more challenging for you to write and for your audience to read.

Fortunately, this oversight can be easily avoided by using SMART objectives.

Hopefully, you now have a good idea of how to create an effective set of aims and objectives for your research project, whether it be a thesis, dissertation or research paper. While it may be tempting to dive directly into your research, spending time on getting your aims and objectives right will give your research clear direction. This won’t only reduce the likelihood of problems arising later down the line, but will also lead to a more thorough and coherent research project.

Finding a PhD has never been this easy – search for a PhD by keyword, location or academic area of interest.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

What are you doing and how are you doing it? Articulating your aims and objectives.

Mar 6, 2019

Have you checked out the rest of The PhD Knowledge Base ? It’s home to hundreds more free resources and guides, written especially for PhD students.

How long does it take the person reading your thesis to understand what you’re doing and how you’re doing it? If the answer is anything other than ’in the opening paragraphs of the thesis’ then keep reading.

If you tell them as early as possible what you’re doing and how you’re doing it – and do so in clear and simple terms – whatever you write after will make much more sense. If you leave them guessing for ten pages, everything they read in those ten pages has no coherence. You’ll know where it is all leading, but they won’t.

Unless you tell them.

If you tell the reader what you’re doing as early as possible in clear and simple terms, whatever you write after will make much more sense.

What are aims & objectives?

If you build a house without foundations, it’s pretty obvious what will happen. It’ll collapse. Your thesis is the same; fail to build the foundations and your thesis just won’t work .

Your aims and objectives are those foundations. That’s why we’ve put them right at the top of our PhD Writing Template (if you haven’t already downloaded it, join the thousands who have by clicking here ).

If you write your aims and objectives clearly then you’ll make your reader’s life easier.

A lot of students fail to clearly articulate their aims and objectives because they aren’t sure themselves what they actually are.

Picture this: if there’s one thing that every PhD student hates it’s being asked by a stranger what their research is on.

Your PhD thesis. All on one page.

Use our free PhD structure template to quickly visualise every element of your thesis.

Hello, Doctor…

Sounds good, doesn’t it? Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back.

Research aims

Your research aims are the answer to the question, ‘What are you doing?’

1. You need to clearly describe what your intentions are and what you hope to achieve. These are your aims.

2. Your aims may be to test theory in a new empirical setting, derive new theory entirely, construct a new data-set, replicate an existing study, question existing orthodoxy, and so on. Whatever they are, clearly articulate them and do so early. Definitely include them in your introduction and, if you’re smart, you’ll write them in your abstract .

3. Be very explicit . In the opening paragraphs, say, in simple terms, ‘ the aim of this thesis is to …’

4. Think of your aims then as a statement of intent. They are a promise to the reader that you are going to do something. You use the next two hundred pages or so to follow through on that promise. If you don’t make the promise, the reader won’t understand your follow-through. Simple as that.

Because they serve as the starting point of the study, there needs to be a flow from your aims through your objectives (more on this below) to your research questions and contribution and then into the study itself. If you have completed your research and found that you answered a different question (not that uncommon), make sure your original aims are still valid. If they aren’t, refine them.

If you struggle to explain in simple terms what your research is about and why it matters, you may need to refine your aims and objectives to make them more concise.

When writing up your aims, there are a number of things to bear in mind.

1. Avoid listing too many. Your PhD isn’t as long as you think it is and you won’t have time or room for more than around two or three.

2. When you write them up, be very specific. Don’t leave things so vague that the reader is left unsure or unclear on what you aim to achieve.

3. Make sure there is a logical flow between each of your aims. They should make sense together and should each be separate components which, when added together, are bigger than the sum of their parts.

Research objectives

Your aims answer the question, ‘What are you doing?’ The objectives are the answer to the question, ‘How are you doing it?’

Research objectives refer to the goals or steps that you will take to achieve your aims.

When you write them, make sure they are SMART.

S pecific: talk in a precise and clear way about what you are going to do.
M easurable: how will you know when you have achieved your aim?
A chievable: make sure that you aren’t overly ambitious.
R ealistic: recognise the time and resource constraints that come with doing a PhD and don’t attempt to do too much.
T ime constrained: determine when each objective needs to be completed.

You need to be as explicit as possible here. Leave the reader in no doubt about what you will do to achieve your aims. Step by step. Leave no ambiguity. At the same time, be careful not to repeat your methods chapter here. Just hint at your methods by presenting the headlines. You’ll have plenty of space in your methods discussion to flesh out the detail.

Elsewhere in the thesis you will necessarily have to talk in a complex language and juggle complex ideas. Here you don’t. You can write in clear, plain sentences.

What is the difference between research aims and objectives?

The aims of a study describe what you hope to achieve. The objectives detail how you are going to achieve your aims.

Let’s use an example to illustrate.

To understand the contribution that local governments make to national level energy policy.

Objectives:

Conduct a survey of local politicians to solicit responses.
Conduct desk-research of local government websites to create a database of local energy policy.
Interview national level politicians to understand the impact these local policies have had.
Data will be coded using a code book derived from dominant theories of governance.

If you’re still struggling, Professor Pat Thompson’s great blog has a guide that will help.

Leave the reader in no doubt about what you will do to achieve your aims. Step by step. Leave no ambiguity.

I can’t articulate them clearly, my research is complicated!

Of course your research is complex. That’s the name of the game. But the sign of someone being able to master complexity is their ability to summarise it . Sure, you’re not looking to capture all the richness and detail in a short summary of aims and objectives, but you are looking to tell the reader what you’re doing and how you’re doing it.

If you’re struggling to clearly articulate your aims and objectives, then try the following task. At the top of a Post-it note write the sentence: ‘In this research I will…’. Then keep trying until you can fit an answer onto one single Post-it note. The answer should answer two questions: what are are you doing and how are you doing it?

Remember – whenever you write, make it as clear as possible. Pay attention to the words ‘as possible’ there. That means you should write as clearly as you can given the fact that your subject and research is necessarily complex. Think of it the other way: it’s about not making things more complicated and unclear than they need to be.

In other words, make your reader’s job as easy as you can. They’ll thank you for it.

If you’re still having trouble, get in touch to arrange a one-on-one coaching session and we can work through your aims and objectives together.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

Research Voyage

Research Tips and Infromation

How to Write Aims and Objectives for your Dissertation or Thesis?

Aims and Objectives Section for PhD Dissertation

Introduction

Understanding aims and objectives, crafting aims, break it down into objectives, developing specific objectives, align with research questions, consider feasibility, review and refine, seek feedback, documenting aims and objectives.

In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction.

Aims represent the broader purpose or the overarching goal of your research. They define what you want to achieve with your dissertation. For example, let’s say you’re conducting a study on renewable energy sources. Your aim could be to analyze the economic viability and environmental impact of solar energy adoption in residential areas.

Objectives, on the other hand, break down the aim into specific, measurable, and achievable targets that help you accomplish your research goal. They outline the specific steps or tasks you need to undertake to fulfill the aim. Continuing with the previous example, some objectives could be:

Evaluate the current state of solar energy technologies and their efficiency.
Assess the economic costs and benefits associated with the installation of solar panels in residential areas.
Analyze the environmental impact of solar energy adoption in terms of carbon emissions reduction.
Investigate the potential barriers to the widespread adoption of solar energy in residential communities.
Develop recommendations for policymakers and stakeholders to promote the use of solar energy in residential areas.

These objectives, when combined, address different aspects related to the aim of analyzing the economic viability and environmental impact of solar energy adoption. Each objective guides a specific aspect of the research and contributes to answering the research questions.

By having clear aims and objectives, you establish a solid framework for your study. They help you stay focused on the main purpose of your research and prevent you from getting sidetracked or overwhelmed by tangential topics. Moreover, they provide clarity to both you and your readers, ensuring that your research remains coherent and well-structured.

In summary, clear aims and objectives are instrumental in guiding the research process of a PhD dissertation. They provide a roadmap, define the research goal, and break it down into specific targets. Through the example provided, it is evident how aims and objectives bring focus to a study on renewable energy sources and solar energy adoption in residential areas.

If you are in paucity of time, not confident of your writing skills and in a hurry to complete the writing task then you can think of hiring a research consultant that solves all your problems. Please visit my article on Hiring a Research consultant for your PhD tasks for further details.

Aims and objectives play a crucial role in guiding research projects. It’s important to define these terms and differentiate between them to ensure a clear focus in your work.

Aims represent the broader purpose or goal of your study. They define what you aim to achieve through your research project. Aims provide the overarching context and direction for your work, guiding the selection of topics, methodologies, and outcomes.

Example: Suppose you’re working on a PhD dissertation in computer science with a focus on natural language processing. Your aim could be: “To develop an efficient and accurate algorithm for sentiment analysis in social media data.”

In this example, the aim highlights the objective of creating an algorithm specifically for sentiment analysis in social media data, indicating the main objective of your research.

Objectives break down the aim into specific, measurable, and achievable targets that contribute to achieving the overall goal. They are more focused and concrete than aims, outlining the steps or tasks necessary to fulfill the aim. Objectives serve as the building blocks of your research, guiding the implementation and evaluation of your work.

Example: Continuing with the previous aim, let’s define some specific objectives:

Collect and preprocess a large dataset of social media posts for sentiment analysis.
Explore and compare existing sentiment analysis techniques to identify their limitations and strengths.
Design and develop a novel algorithm that addresses the limitations of current approaches.
Implement the algorithm and evaluate its performance on the collected dataset.
Analyze the results and compare them with existing state-of-the-art sentiment analysis methods.

These objectives, when combined, address different aspects necessary to fulfill the aim of developing an efficient and accurate sentiment analysis algorithm for social media data. Each objective represents a specific task or milestone that contributes to the overall research goal.

The relationship between aims and objectives is critical in driving research. Objectives are derived from the aim and provide the means to accomplish it. They act as stepping stones, guiding the researcher towards achieving the broader aim.

In summary, aims provide the broader context and goal, while objectives break down the aim into specific tasks and milestones. Together, they ensure focus and direction in your research, guiding the selection of topics, methodologies, and outcomes. The objectives serve as the means to achieve the overall aim, highlighting the relationship between aims and objectives in driving research in the computer science domain.

Formulating the overarching aim of your research is a crucial step in defining the direction and purpose of your dissertation. The aim represents the primary goal or intention of your study, and crafting it effectively is essential for setting the foundation of your research.

Research Topic: Enhancing cybersecurity in cloud computing environments.

In this example, the aim focuses on improving cybersecurity in the context of cloud computing. The aim should be formulated in a concise and focused manner that aligns with the research topic. Here’s an example of how the aim could be crafted effectively:

Aim: Develop an efficient and robust security framework for ensuring data confidentiality, integrity, and availability in cloud computing environments.

The above aim encapsulates the overall goal of the research, which is to develop a security framework for enhancing cybersecurity in cloud computing. It clearly states the intention to address key aspects such as data confidentiality, integrity, and availability. The aim is concise, specific, and directly aligned with the research topic.

The significance of a well-defined aim cannot be overstated. It serves as a guiding beacon throughout your research journey, providing a clear direction and purpose. A well-crafted aim helps you stay focused and ensures that your efforts are aligned with the research’s core objectives. It also helps you communicate the purpose of your study to others, including your advisor, peers, and potential readers of your dissertation.

Additionally, an effective aim sets the stage for the subsequent development of specific objectives and research questions. It serves as a foundation upon which you can break down the aim into smaller, manageable objectives that contribute to achieving the overall research goal. Each objective should align with the aim and work together harmoniously to address the research questions and gaps in the field.

Moreover, a concise and aligned aim allows readers to quickly grasp the essence of your research. It provides them with a clear understanding of the research’s scope and purpose. By stating the aim concisely and aligning it with the research topic, you demonstrate your ability to articulate the core objective of your study in a succinct manner.

In summary, crafting effective aims involves formulating the overarching goal or intention of your research in a concise and focused manner. A well-defined aim sets the direction for your dissertation, guiding your efforts and ensuring alignment with the research topic. It serves as a foundation for the development of specific objectives and research questions. By presenting a clear and aligned aim, you convey the purpose of your study to others and demonstrate your ability to articulate the core objective of your research.

After defining the aim of your research, it’s important to break it down into smaller, manageable objectives. These objectives should address key research questions or subtopics that are necessary to achieve the overall aim. Additionally, objectives should be specific, measurable, and utilize action verbs to describe the intended actions or achievements.

Example: Suppose the aim of your research is to develop a recommendation system for an e-commerce platform. Here are some examples of specific objectives:

Action Verbs: Analyze, Identify
Description: Gather and analyze user preferences and historical data from the e-commerce platform to identify patterns in user behavior and item preferences.
Action Verbs: Design, Implement
Description: Develop and implement collaborative filtering algorithms, such as user-based or item-based methods, to generate personalized recommendations based on user similarities or item similarities.
Action Verbs: Incorporate
Description: Integrate machine learning techniques, such as matrix factorization or deep learning models, into the recommendation system to improve the accuracy and personalization of the recommendations.
Action Verbs: Evaluate
Description: Conduct experiments and evaluate the performance of the recommendation system using appropriate evaluation metrics, such as precision, recall, or mean average precision, to assess the effectiveness and efficiency of the system.
Action Verbs: Optimize
Description: Identify and implement optimization techniques, such as parallel computing or distributed systems, to enhance the scalability and efficiency of the recommendation algorithm, allowing it to handle large-scale datasets and real-time recommendations.

By breaking down the aim into these specific objectives, you address key components of developing a recommendation system, such as data analysis, algorithm design, evaluation, and optimization. Each objective represents a distinct step that contributes to achieving the overall aim.

Importantly, these objectives are specific and measurable, allowing you to determine whether you have successfully achieved them. For instance, you can measure the accuracy of the recommendation system, evaluate its performance against baseline models, or assess its scalability in terms of handling large datasets.

In summary, when conducting research, breaking down the aim into specific objectives helps in managing the workload and providing a clear roadmap for your research. These objectives should address key research questions or subtopics, be specific and measurable, and use action verbs to describe the intended actions or achievements. By following this approach, you can ensure a systematic and focused research process.

To develop specific objectives for your research, you need to break down the overarching aim into smaller, measurable objectives. These objectives should be clear, specific, and actionable, providing a roadmap for your research and guiding the entire research process.

Aim: Develop a machine learning-based system for automated sentiment analysis in social media data.

Objective 1: Conduct a comprehensive literature review on existing sentiment analysis techniques and methodologies.

Breakdown: This objective focuses on reviewing the literature in the field of sentiment analysis, specifically examining the various techniques and methodologies that have been developed and applied. It involves gathering and analyzing research papers, books, and other relevant sources to gain a comprehensive understanding of the existing knowledge in sentiment analysis.

Objective 2: Collect a large dataset of social media posts for training and evaluation.

Breakdown: This objective entails the collection of a substantial amount of social media data that will be used as input for training and evaluating the machine learning model. It involves designing data collection mechanisms, such as web scraping or utilizing available APIs, to gather a diverse set of social media posts from platforms like Twitter or Facebook.

Objective 3: Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.

Breakdown: This objective focuses on the development of a machine learning algorithm tailored for sentiment analysis in social media text. It involves designing and implementing the necessary algorithms, selecting appropriate feature representations, and training a model to accurately classify sentiment polarity (positive, negative, or neutral) of social media posts.

Objective 4: Evaluate the performance of the developed sentiment analysis system against benchmark datasets and compare it with existing state-of-the-art approaches.

Breakdown: This objective involves assessing the performance of the developed sentiment analysis system by evaluating it against established benchmark datasets. It requires selecting appropriate evaluation metrics and comparing the system’s performance with existing state-of-the-art approaches in sentiment analysis, such as accuracy, precision, recall, or F1 score.

The importance of clear, specific objectives cannot be overstated. These objectives provide a clear roadmap and direction for your research, guiding your efforts and ensuring that you stay on track. They help you structure your research activities, allocate resources effectively, and measure progress along the way.

Using action verbs to articulate objectives effectively is another crucial aspect. Action verbs convey specific actions or achievements that need to be accomplished. They provide clarity and precision, leaving no room for ambiguity. For example:

By using action verbs, you explicitly state what needs to be done or achieved in each objective, making it easier to track progress and assess the completion of objectives.

In summary, developing specific objectives involves breaking down the overarching aim into smaller, measurable objectives. Clear and specific objectives provide a roadmap for your research and guide the entire research process. By using action verbs, you articulate objectives effectively, leaving no room for ambiguity. These objectives help structure your research activities, allocate resources effectively, and measure progress, ultimately leading to the successful completion of your research.

When formulating objectives for your research, it is essential to ensure that they align with the research questions you have formulated. Each objective should contribute to addressing or answering a specific research question, creating a cohesive and focused research framework.

Example: Suppose your research in computer science focuses on developing an automated system for detecting and preventing cybersecurity threats. Here are examples of objectives aligned with research questions:

Research Question: How can machine learning algorithms be utilized to detect and mitigate cybersecurity threats effectively?

Objective 1: Evaluate and compare different machine learning algorithms for cybersecurity threat detection.

Description: Explore and assess various machine learning algorithms, such as decision trees, random forests, or neural networks, to identify the most suitable approach for detecting cybersecurity threats accurately and efficiently.

Objective 2: Develop a dataset representative of diverse cybersecurity threats.

Description: Create a comprehensive dataset containing various types of cybersecurity threats, including malware, phishing attacks, and network intrusions, to train and evaluate the machine learning models effectively.

Research Question: What are the key challenges and vulnerabilities in existing cybersecurity systems that need to be addressed?

Objective 3: Conduct a systematic analysis of existing cybersecurity systems and identify vulnerabilities.

Description: Analyze and evaluate existing cybersecurity systems, such as intrusion detection systems or antivirus software, to identify vulnerabilities, weaknesses, and potential areas of improvement that can inform the development of a more robust automated system.

Objective 4: Propose novel techniques to enhance the resilience of the cybersecurity system.

Description: Develop innovative approaches, such as anomaly detection algorithms or behavior-based analysis techniques, to enhance the resilience of the automated cybersecurity system and address the identified vulnerabilities.

By aligning the objectives with the research questions, you ensure that each objective contributes to addressing a specific aspect of your research. For example, Objective 1 directly addresses the research question regarding the utilization of machine learning algorithms for cybersecurity threat detection. Objective 3 focuses on analyzing existing systems to identify vulnerabilities, which is in line with the question about challenges and vulnerabilities in existing cybersecurity systems.

The alignment between research questions and objectives helps maintain a clear focus on the research objectives and ensures that your efforts are directed towards addressing the research questions. It also enhances the coherence of your research, as each objective becomes a stepping stone towards answering the research questions and achieving the overall aim of your study.

In summary, aligning objectives with research questions is crucial in research. It ensures that each objective contributes to answering or addressing a specific research question, creating a logical and cohesive framework for your study. By establishing this alignment, you can maintain a clear focus on the research objectives and make meaningful contributions to the field.

When setting objectives for your research, it is important to consider their feasibility. Feasibility refers to the realistic achievability of your objectives within the scope of your PhD research, taking into account available resources, time constraints, and other practical limitations.

Example: Suppose your research focuses on developing a new algorithm for real-time video processing and analysis. Here are examples of objectives that consider feasibility:

Objective 1: Implement the real-time video processing algorithm on a high-performance computing cluster.

Feasibility Considerations: Before setting this objective, assess whether you have access to a high-performance computing cluster and the necessary resources (e.g., hardware, software, computational power) to support the implementation and testing of the algorithm. If such resources are available within your research environment or institution, this objective is feasible.

Objective 2: Collect and annotate a large-scale video dataset for algorithm training and evaluation.

Feasibility Considerations: Consider the practical aspects of collecting and annotating a large-scale video dataset. Evaluate the time, manpower, and equipment required for this task. Assess whether you have access to the necessary resources (e.g., cameras, storage, annotation tools) and the capability to manage and process such a dataset. If these resources and capabilities are available within your research context, this objective is feasible.

Objective 3: Collaborate with industry partners to obtain real-world video data for testing and validation.

Feasibility Considerations: Evaluate the feasibility of establishing collaborations with industry partners to obtain real-world video data. Consider factors such as data sharing agreements, legal and privacy considerations, and the willingness of industry partners to provide access to their data. Assess the potential challenges and limitations that may arise during this collaboration process. If such collaborations are feasible and can be established within the constraints of your research, this objective is feasible.

By considering feasibility, you ensure that your objectives are realistically achievable within the resources, time, and other constraints of your PhD research. It helps you avoid setting objectives that are too ambitious or beyond the scope of what you can reasonably accomplish.

Feasibility assessment is crucial in ensuring the successful completion of your research project. It allows you to allocate resources effectively, manage your time, and avoid potential pitfalls or setbacks that could hinder your progress. By setting feasible objectives, you can maintain a practical and manageable research plan that is more likely to lead to meaningful outcomes within the given constraints.

In summary, considering feasibility when setting objectives in computer science research is essential. Assess the available resources, time constraints, and practical limitations to ensure that your objectives are realistically achievable within the scope of your PhD research. By doing so, you can plan and execute your research effectively, making the most of the resources at your disposal and increasing the likelihood of successful outcomes.

Once you have defined your aims and objectives for your research, it’s important to review and refine them to ensure clarity, coherence, and logical flow. This step allows you to make any necessary revisions to ensure that your aims and objectives accurately reflect the scope and purpose of your research.

Example: Suppose your research in computer science focuses on developing a mobile application for enhancing cybersecurity awareness among smartphone users. Here’s an example of reviewing and refining aims and objectives:

Aim: Develop a mobile application for enhancing cybersecurity awareness among smartphone users.

Objective 1: Conduct a comprehensive literature review on cybersecurity awareness strategies and mobile application design principles.

Review and Refinement: Upon review, you find that the objective is clear and aligned with the aim. However, you decide to refine it to include specific aspects you intend to cover in the literature review, such as user education techniques, persuasive design elements, and existing cybersecurity awareness mobile applications.

Objective 2: Design and develop a user-friendly mobile application prototype that delivers educational content and interactive features.

Review and Refinement: During the review, you realize that the objective lacks specificity regarding the educational content and interactive features. You refine it to explicitly mention the inclusion of topics like phishing prevention, password management, and interactive quizzes to reinforce learning.

Objective 3: Conduct usability testing and collect feedback from potential users to evaluate the effectiveness of the mobile application.

Review and Refinement: While reviewing, you realize that the objective could benefit from additional information. You refine it to include details such as the target user group (e.g., smartphone users aged 18-35), the number of participants you plan to involve in the usability testing, and the specific metrics you will use to evaluate the effectiveness of the application.

By reviewing and refining your aims and objectives, you ensure that they accurately capture the scope and purpose of your research. It helps you identify any gaps, ambiguities, or areas that need further clarification. Through this process, you can enhance the clarity, coherence, and logical flow of your aims and objectives, making them more robust and aligned with your research goals.

Additionally, reviewing and refining your aims and objectives allows you to align them with the current state of knowledge in the field. As you conduct literature reviews and gain more insights into existing research, you may discover the need to make adjustments to your aims and objectives to reflect the most relevant and up-to-date information.

In summary, reviewing and refining aims and objectives in research is essential to ensure clarity, coherence, and logical flow. By carefully reviewing each aim and objective, you can identify areas for improvement, refine them to include specific details, and align them with the current state of knowledge in the field. This process enhances the accuracy and effectiveness of your aims and objectives, providing a strong foundation for your research.

Once you have developed your aims and objectives for your research, it is important to seek feedback from your supervisor or peers. Sharing your aims and objectives with others allows you to gather valuable insights, suggestions, and perspectives that can help refine and improve your objectives, ensuring they are appropriate and aligned with your research.

Imagine you have formulated the following objectives for your computer science research on developing an intelligent tutoring system:

Objective 1: Conduct a literature review on existing intelligent tutoring systems and their effectiveness in enhancing student learning outcomes.

Objective 2: Design and develop an adaptive learning algorithm to personalize the tutoring experience based on individual student needs.

Objective 3: Implement a user-friendly interface for the intelligent tutoring system that provides an intuitive and engaging learning environment.

Objective 4: Evaluate the effectiveness of the developed intelligent tutoring system through a series of user studies and compare it with traditional tutoring methods.

At this stage, it would be beneficial to share your aims and objectives with your supervisor or peers to receive feedback. They can provide valuable insights and suggestions to help you refine and improve your objectives. For example:

Your supervisor may suggest including a specific research question to further clarify the focus of Objective 1, such as “What are the key features and techniques used in successful intelligent tutoring systems?”
Peers may provide feedback on the clarity and specificity of Objective 2, suggesting adding details on the specific adaptability mechanisms to be incorporated.
Your supervisor might suggest considering the inclusion of usability testing as part of Objective 3 to ensure the interface meets the needs and preferences of the target users.
Peers may offer suggestions on additional evaluation metrics or experimental setups to strengthen Objective 4 and provide more robust comparisons.

By seeking feedback, you open yourself up to constructive criticism and valuable perspectives that can help enhance the quality and effectiveness of your aims and objectives. Feedback from experienced researchers or knowledgeable peers can help you identify any potential gaps or weaknesses in your objectives and provide suggestions for improvement.

Remember that feedback is an iterative process, and it is important to carefully consider the suggestions provided while also critically evaluating them in the context of your research. Incorporating constructive feedback will help you refine your aims and objectives, ensuring they are robust, relevant, and aligned with your research goals.

In summary, seeking feedback on your aims and objectives is a valuable step in the process of developing your research. Sharing your objectives with your supervisor or peers allows you to gather insights, suggestions, and perspectives that can help refine and improve your objectives. Feedback helps ensure that your objectives are appropriate, clear, and aligned with your research goals, ultimately strengthening the overall quality of your research.

When writing your dissertation, it is crucial to properly document and present your aims and objectives. The placement and presentation of aims and objectives play a significant role in providing readers with a clear understanding of the research’s purpose and direction.

Placement: The aims and objectives of your research should be presented early on in your dissertation, typically within the introduction chapter. This allows readers to grasp the overall scope and intent of your research from the beginning. Placing them in the introduction helps set the context and provides a roadmap for the rest of the dissertation.

Presentation: When presenting aims and objectives, it is important to clearly distinguish between the two and articulate their role in driving the research. Here’s an example of how you can document aims and objectives:

Aims: Start by presenting the overarching aim of your research, which represents the primary goal or intention of your study. It should be a concise statement that captures the essence of your research focus.

For example:

Aim: The aim of this research is to develop a machine learning-based system for automated sentiment analysis in social media data.

Objectives: Following the aim, present a list of specific objectives that outline the key steps or milestones required to achieve the aim. Each objective should be clear, specific, and measurable. Here’s an example:

Objectives:

Analyze existing sentiment analysis techniques and methodologies in the literature to identify their limitations and challenges.
Collect and preprocess a large dataset of social media posts to serve as the training and evaluation data for the sentiment analysis system.
Design and implement a machine learning algorithm capable of accurately detecting sentiment polarity in social media text.
Evaluate the performance of the developed sentiment analysis system against existing state-of-the-art approaches, using appropriate evaluation metrics.
Optimize the system for scalability and efficiency, allowing it to handle large volumes of real-time social media data.

By clearly documenting the aims and objectives in your dissertation, you provide readers with a clear understanding of the purpose and direction of your research. This enables them to follow your thought process and evaluate the relevance and significance of your study. Aims and objectives serve as guideposts that help readers navigate through your dissertation and understand the specific research questions you seek to address.

Moreover, the well-documented aims and objectives help you maintain focus throughout your research journey and provide a framework for organizing your dissertation. They establish the foundation upon which your methodology, analysis, and conclusions are built.

In summary, when documenting aims and objectives in a dissertation, it is important to place them in the introduction chapter and clearly present their role in guiding the research. Aims and objectives should be distinct, with the aim of capturing the overarching goal and the objectives outlining the specific steps or milestones to achieve it. By effectively documenting aims and objectives, you provide readers with a clear understanding of the research’s purpose and direction, facilitating their engagement with your work.

Crafting clear and well-defined aims and objectives is a critical aspect of writing a PhD or Post Graduate dissertation. These aims and objectives provide a solid foundation for your research, guiding your efforts and ensuring a focused and coherent study. Through this discussion, we have explored the importance of aims and objectives in a PhD dissertation and how they contribute to the research process.

Upcoming Events

Visit the Upcoming International Conferences at Exotic Travel Destinations with Travel Plan
Visit for Research Internships Worldwide

No internet connection.

All search filters on the page have been cleared., your search has been saved..

All content
Dictionaries
Encyclopedias
Expert Insights
Foundations
How-to Guides
Journal Articles
Little Blue Books
Little Green Books
Project Planner
Tools Directory
Sign in to my profile My Profile

Sign in Signed in
My profile My Profile

Writing Effective Research Aims and Objectives

By: Margaret-Anne Houston , Marissa McDonagh Edited by: Margaret-Anne Houston
Product: Sage Research Methods: Business
Publisher: SAGE Publications Ltd
Publication year: 2023
Online pub date: March 21, 2023
Discipline: Business and Management
Methods: Research questions , Writing research , Research design
DOI: https:// doi. org/10.4135/9781529668216
Keywords: fuel poverty , social media Show all Show less
Academic Level: Advanced Undergraduate Online ISBN: 9781529668216 More information Less information

The writing of effective research aims and objectives can cause confusion and concern to new and experienced researchers and learners. This step in your research journey is usually the first written method used to convey your research idea to your tutor. Therefore, aims and objectives should clearly convey your topic, academic foundation, and research design. In order to write effective research aims and objectives, researchers should consider all aspects of their proposed work. For example, the sample(s) to be approached for participation in the primary data collection. Identifying research objectives that are SMART is key to ensuring key aspects of the work are considered prior to any data collection. This includes consideration of access to samples and the ethics of researching the topic and research design. Finally, seeing your work as others will read it, can be an effective evaluation tool to ensure your own research objectives adequately capture and reflect your intended study. Therefore, this guide encourages you to consider common issues with identifying and writing research aims and objectives through consideration of examples.

Learning Outcomes

By the end of this guide, readers should be able to:

Identify the meaning and purpose of a research aim within business research
Understand the link between an effective research aim and the wider topic and literature/secondary sources, where appropriate
Understand how to identify and write Specific, Measurable, Achievable, Realistic and Timely (SMART) Research objectives, research questions, and consideration of research hypothesis
Recognize the link between writing an effective research aim and the research design. Write own research aim and objectives

Introduction

The writing of effective research aims and objectives can cause confusion and concern to new (and experienced!) researchers and learners. Attempting to identify the scope and focus of a project within a few specific statements, can take time and consideration of all aspects of your research design. If you are still unsure of your approach to your topic, or even the boundaries of the topic itself, this uncertainty can make the framing of an effective research aim seem like an uphill task.

However, even if this is your first time trying to convey your research idea within a few concise and precise statements, there are steps to take to ensure your work clearly communicates your meaning to your audience. This how-to-guide draws on examples of business topic research aims and objectives and explores techniques for reviewing their meaning. This active learning approach will enable you to grow confidence in framing and communicating your own research.

The importance of ensuring the research aim and objectives are not only reflective of the topic choice but are also achievable can be a fluid process, which in itself, can result in anxious researchers. Seeing your work as others will read it, can be an effective evaluation tool to ensure your own research objectives adequately capture and reflect your intended study. Therefore, this guide encourages you to consider common issues with identifying and writing research aims and objectives through consideration of examples.

Identify the Meaning and Purpose of a Research Aim with Business Research

Writing an effective research aim is an integral part of the research process. A research aim is a statement of intent. It should communicate your research goal clearly and should provide a focus for your work from the offset. It is important to differentiate between a research aim and the objectives. If a research aim tells the reader what you plan to achieve, then the research objectives should state how you would reach that goal. Often the objectives will provide a road map of the steps you will take in order to meet the research aim. Therefore, a research aim in business-related topics is typically a single sentence or even two, which conveys the overall purpose of the research-the end goal!

The terminology you use when writing your research aim is important. Note the following example aims from Business related topics:

1. This research aims to evaluate the lasting effects of lockdown and ‘work from home’ initiatives on productiveness in the financial service industry.
2. This research aims to establish a link between innovations in Artificial Intelligence (AI) and recruitment processes for The Royal Bank of Scotland.
3. This research aims to investigate to what extent Corporate Social Responsibility (CSR) initiatives can influence consumer behavior. A case study of Aldi UK.
4. This research aims to assess the effectiveness of technology companies’ risk management of cyber and information risks measured on the basis of supply chain resilience.
5. This research aims to explore the impact of Government funded initiatives to encourage social entrepreneurship in Scotland.

As evidenced above all of the aims stated contain verbs, these highlight how the research will be undertaken. Words such as to assess, to establish, to explore or to evaluate all reflect research analysis. This conveys your intention clearly to the reader and whilst it may not fully demonstrate exactly how the project will be undertaken, the verbs show what the goal is.

The objectives, which follow the aim, can help to show the exact ways the aim will be achieved, highlighting the research methods. It is important to think carefully about whether you plan to or will be to, come to a clear conclusion. Often it is not possible and this can be due to many factors such as the time or scope of the issue. For example, in the aims stated above number 2 is the only one that states it will ‘establish a link.’ This is because the aim is specific and measurable. The objectives should identify the specific processes it will examine and link to effective recruitment practices that are more effective than prior to AI being used.

However, for the other aims it is more appropriate to explore or investigate the topics, as opposed to ‘establishing’ or to ‘evidence an impact.’

Abbreviations are a useful way of shortening words or phrases and they can give writing a more coherent flow. It is worth noting that all abbreviations like AI or CSR should only be used when they are spelled out initially and if they appear frequently throughout your writing.

It is important to always check with your supervisor or course Handbook but typically, you should have a research question, a research aim, and objectives. The research question should capture what the issue is, often it will help to explain your research aim by offering a critical perspective. For example, if your research is to evaluate the effect of something then your question may be to what extent is that something works?

Finally, it is important to remember that the wording of your research aim may change slightly as your research progresses. Often students will modify the words to reflect what they are undertaking as the process develops.

Section Summary

An effective research aim should clearly set out the goal of a project.
Carefully consider the terminology you use at this stage, and ensure it reflects the outcome of the study.
Remember a research aim can be fluid and the exact wording is likely to change as you progress through your research journey.

Understand the Link Between an Effective Research Aim and the Wider Topic and Literature/secondary Sources, Where Appropriate

When developing the research aim it is important to be engaged with the wider topic and associated literature and secondary sources from the offset. These sources will be crucial in helping you to tackle the topic successfully.

Identifying an idea for a research project can sometimes be a relatively simple first step in the research process. It is often narrowing the idea down to a research aim, which can be more difficult. A good way to start is to brainstorm ideas, think about what interests you the most about your studies, and note down keywords which can then be used as search terms. Researchers, at all levels of research and study, should consider information-seeking as a process through which they engage with the primary literature and secondary sources concerning their topic area. This will develop self-confidence in your ability to define the terms of reference of your work and studies. An inquiring mind and openness to a degree of flexibility of approach in these early stages of research, can be key to ensuring initial topic ideas can be molded into achievable research aims and objectives.

Research could be considered to be cyclical, not a one-off process. Therefore, in order to ensure a definable and achievable research topic, many projects use a mixture of sources. This requires a degree of confidence on the part of the researcher; to identify the relevant resources they require, a strategy for how to find them and also, a process for information management.

Many researchers will start with an online search for both academic and non-academic sources. The short-term success of this first step can be dictated by the choice of keywords and phrases. That is, those terms that the researcher believes are most relevant for, and most likely to come up with links to their research topic. However, caution should be employed in this initial task of online searching - this is an important opportunity to consider how we identify these specific keywords. A limited understanding of the area will be enhanced through further reading. It can allow the researcher to access previous studies in the same topic area and identify effective research methods. An informed research aim should be underpinned by reading and evaluating sources in relation to the research idea.

Using the research aims below as examples, note the sources required and some issues to consider for each source. By strategically linking your research aim to the wider area you will ensure your research is robust from the start.

Reading combined with ongoing critical appraisal of associated sources can help to refine and focus your research aim and objectives.
Think of your research as an ongoing process. Reading associated sources should be embedded in every stage of your research journey.
Ensure you are acknowledging the wider research area and associated sources from the offset as this will help to refine and focus your research aim and objectives.

Understanding How to Identify SMART Research Objectives, Research Questions, and Consideration of Research Hypothesis

First-time final year undergraduates are normally expected to identify a research topic and research design that are realistic and achievable. Not only should they be realistic as topics but also achievable within a short time period when most learners have never undertaken such work previously. A common pitfall of many initial research topics is identifying an area that is too wide in scope. A simple step is to consider how to express and convey the work within a series of research objectives. Careful consideration of the content of these statements can help narrow the topic focus, and ensure the research design is relevant to the work to be undertaken. Therefore, writing your objectives should be viewed as a process and not a one-off exercise. Remember, they convey your work to an audience and set out the initial boundaries of the research to be undertaken.

Therefore, research aims and objectives should provide focus and direction for the research topic. Many business research methods texts will introduce the writing of research aims and objectives as a specific skill required to ensure they are Specific, Measurable, Achievable, Realistic and Timely (SMART). By following the SMART guidelines and analyzing examples of common issues within aims and objectives, learners can build confidence and ensure their aims and objectives are strong. Together with these five criteria, the language used can convey the depth of the inquiry. By way of explanation, consider the following topic submitted for consideration as a final-year project:

The research aim is to evaluate consumer perceptions of the impact of social media advertising on their car purchasing decisions. The fieldwork will examine consumer attitudes toward social media advertising and the benefits of this approach. This will be explored through the following research objectives:

1. Examine relevant literature concerning advertising, and trends in social media within the car industry;
2. Identify the attitudes of key players and stakeholders within the advertising industry toward the use of social media;
3. Discuss the effects of new technology on social media and advertising trends;
4. Evaluate how consumers relate to new technology with a view to making recommendations for improvement in the use of social media within online advertising.

S pecific – the research objectives reflect the terminology also used within the research aim.

M easureable – this does not necessarily mean that the work will involve quantitative data. Consider that the objectives identify the issues and samples and so the target of the work.

A chievable – does the work appear to be a piece of research that could be undertaken and completed within the confines of the undergraduate program? It could be achievable on the basis that the work does not appear to require a long time period to complete and the samples should be accessible. Achievability is also a consideration of university ethical consideration processes. For example, although a researcher is able to identify a sample of participants who are experiencing fuel poverty, consideration must be given to the possible ethical issues that surround requesting their participation. It may be deemed that the research could in some manner cause harm to the participants, such as stress through talking about their lived experiences. This stress could also be felt by the researcher who may not be trained to deal with such emotional situations. In both of these examples, the university ethics process could decide this work is unachievable.

R ealistic – the issue of social media advertising is realistic within the stated industry. The samples identified also appear linked to the topic. Furthermore, the academic foundation of the work is also identified – advertising. The work also appears to be realistic in terms of the resources required to complete it. The ethical use of data gathered from social media could also be relevant to determining if this topic is realistic. As with Achievability above, issues such as how the data was originally gathered and how it will then be used by the researcher, would be scrutinized by the Ethics process. Again, the principle of ‘do no harm’ would be applied to determine if the work is realistic.

T imely – although the work does not offer a specific timeframe, the use of social media for advertising is evident within the car industry. Therefore, this could be said to be timely.

Furthermore, the terminology is important. If you choose words that are descriptive, they will convey work that is also descriptive. So, try to use words such as ‘describe,’ ‘understand,’ or ‘gain an insight into’ only where they adequately reflect that your research is not an in-depth study. Consider using terms to evidence how you will approach each objective including: evaluate; critique; critically discuss and examine. All infer the research will go beyond a surface inquiry.

Now, at this stage, consider if the research wished to study the possible relationships between variables such as the impact on consumers of exposure to social media advertising on car sales decision-making. As with the approach to the similar topic above, this could be explored using qualitative data by gathering the experiences of consumers and/or people within the car industry. However, research that specifically wishes to explore possible links between issues and/or specific variables, could sometimes be better framed using a research hypothesis. This is a statement that identifies possible c ause and effect ’ relationships between variables. Therefore, the focus of the above topic could be reconsidered to identify the impact of social media advertising within the car industry. The new research question and hypothesis could be thus:

The research question: Do consumers perceive the impact of social media advertising on their car purchasing decisions?

Null Hypothesis: There is no difference in car purchasing decisions between those consumers who are exposed to social media advertising of cars compared to those who are not.

Alternative Hypothesis: There is a relationship between whether or not a consumer has been exposed to social media advertising and their car purchasing decision.

In order to address the hypothesis, some form of statistical testing would be required which is not covered in this guide. However, as a researcher, you should always consider what it is specifically that you wish to research when framing your work. This topic consideration could identify specific issues and/or variables which you wish to explore further to test if there are statistical relationships. In this situation, you could consider including hypothesis testing within your research design. As can be viewed above, related topics may be presented in different ways, with the inclusion or exclusion of a research hypothesis. The existence of possible relationships may be explored through research that seeks perceptions of advertising. However, research which seeks statistical evidence would be best represented with hypothesis testing.

Research aim and objectives convey to your audience the topic and possible boundaries of your work. Therefore, ensuring they are presented as SMART, allows others to assess your work in the way you intended.
Research ethics should be considered when writing research aims and objectives, including the potential impact of participation on individuals. Research should do no harm to the individuals involved, including the sample and researchers themselves.
Research does not always necessitate consideration of the research hypothesis. However, in some circumstances, a well-considered hypothesis could offer statistical weight to your findings.

Recognizing the Link Between Writing an Effective Research Aim and the Research Design

The research aim and objectives should be written in a way that conveys the specific area or problem to be researched. This should allow anyone reading your research aim to understand the main focus of the work. For example, your work may aim to examine the lived experiences of individuals living with fuel poverty within a specific geographic area or demographic. In this example, you can clearly identify the topic – lived experiences of fuel poverty – and the focus – individuals within the chosen geographical area/demographic . To a more experienced researcher, it can also offer insight into the research design which may be reasonably expected. So, studies of ‘lived experiences’ can involve the gathering and/or analysis of qualitative data from individuals/communities as the researcher seek to gather the first-hand experiences of participants (individuals).

Clearly written research aim and objectives should allow the reader to consider the following information:

1. Wider academic area(s) within which the topic falls (for example, accountancy; marketing; management);
2. The main areas of the literature identified within the aim and/or objectives;
3. The data which would be expected to be gathered to in order to meet/address the research objectives;
4. The data collection methods which could be deemed relevant to the research aim and,
5. Overall, if the research aim and objectives are SMART (see above).

Consider the wording in the example below:

The research aim of this dissertation is to examine the lived experiences of people living with fuel poverty and their attitudes towards support services within a local council area. This research aim will be addressed through the following research objectives:

1. Critically review previous literature and evaluate the origins and purpose of different definitions of ‘fuel poverty.’
2. Explore the attitudes of individuals currently experiencing fuel poverty towards support agencies and other stakeholders.
3. Analyze the opportunities and barriers to support agencies and related stakeholders within a local council area with specific regard to supporting those experiencing fuel poverty.
4. Compare and contrast the lived experiences of individuals experiencing fuel poverty with those of the support agencies to identify potential service gaps.

Looking closely at the work above, it could be reasonable to make the following assumptions about the research:

The academic area(s) within which the topic falls (for example, accountancy; marketing; management; social sciences; economics). This can be researched and explored by keyword searching the research aim. In this example, there appear to be multiple academic roots to the work:

‘lived experiences of people living with fuel poverty’ – this could be viewed as a social science/economics topic or even an engineering area. Either would depend on the specific view taken to investigate fuel poverty, i.e., real-world examples of lived experiences, specially such as narratives about their daily life. Alternatively, this aim could encapsulate studies within engineering areas that seek to understand the impact of construction and design decisions on the daily life of individuals.
‘…and their attitudes towards support services within a local council area’ – by adding a focus for the study as being specific to support services, this work is now narrowed to more reflect the social sciences area.
If the work was indeed to study any issues such as building construction, this would be expected to appear within the research aim to convey the topic clearly and precisely.

Therefore, it could be expected that if the research draws on wider academic areas, this should be evident from the terminology within the research objectives. A consistent use of terminology ensures the academic foundation of the work is identifiable throughout. It could also be reasonably presumed that the relevant issues of each sample (individuals within fuel poverty, the support services, and stakeholders), would be refined to include specific factors to ensure the work is focused on specific issues.

Next, consider the type of data you would expect to gather to in order to meet/address the research objectives. The following options appear to be linked to the wording of the objectives:

Secondary Data: The objectives identify the need for literature in the first stages of work in order to address objectives 1, 2, and 3. As the research is based on lived experiences, this could include not only academic work but also charity and government reports. Given that this is a real-world issue, examples could also be identified from reputable news agencies. All of these sources could help identify possible issues that may be identified by research participants during the data gathering. If these issues are not identified by the participants, they could be used to form a critical discussion around opportunities or barriers (objective 3).
Primary Data: Given the focus on lived experiences related to support services, the research may be presumed to include a qualitative study. A qualitative study would allow participants to use their own voices and language to explain their lived experiences. Whereas a quantitative study, by its nature, could explore the issues already known to the researcher when the instrument was written, e.g., survey. Qualitative data could perhaps encourage more personal issues to be identified by the individual participants, and also offer some context for their position.

Subsequently, consider which data collection methods you would expect to be used to address the research aim.

Quantitative data gathering tools: Could quantitative data gathering explore the lived experiences of this sample? Many areas could be effectively explored however lived experiences tend to be personal to the individual and so qualitative could offer more depth and richness to the data.
As both the research aim and objectives identify specific samples, the research could be considered to have a boundary around those to be invited to participate. Therefore, secondary data may identify the definitions of fuel poverty and offer reasons for any differences. It could also allow the identification of the roles and remits of support services and stakeholders. However, it will not offer specific lived experience details that can come from the sample of individuals.

If specific organizational sectors or companies were identified, the use of quantitative data-gathering tools, such as a survey, may allow more specific information to be gathered. Remember, the research aim identifies that the focus is the individuals who experience fuel poverty. Therefore, a survey could address issues such as knowledge and understanding of these service providers. However, it could then miss hearing about the informal networks used by individuals for support, which could come to light during a qualitative study.

Finally, if in doubt, show your research aim and objectives to a colleague and ask them to tell you , what they think your research is about. This simple exercise will enable you to realize what other people understand from your work and so, allow you to tweak where necessary. This should ensure your research is not only accessible to different audiences but ultimately, is a fair reflection of your topic choice.

Clearly written research aims and objectives can effectively convey information about your work. This allows a reader to consider the key aspects of your topic and sets expectations about the contents of your report/dissertation/thesis.
Always ensure that the language used to write a research aim and objectives, adequately convey the meaning and depth of your research. It should be specific to your topic but also accessible to the intended audience(s).
SMART research objectives can convey your understanding of research design. This should be apparent from the layering of issues and identification of relevant samples.

In conclusion, this guide has offered practical steps through example-based exercises to help you format your idea into an effective research aim and objectives. Having progressed through the exercises, you will have considered issues such as the importance of understanding how a research aim can help you refine your idea. It is also the mechanism to convey your research intention to your audience. Through exploring the importance of linking your research aim to the wider research area this will give you the confidence to develop SMART objectives. Following this, your work will reflect key areas of your research design through the use of relevant research methods terminology.

Therefore, by following the steps in this guide you should now be confident to take your idea and form it into robust research aims and objectives.

Multiple-Choice Quiz Questions

1. The purpose of a research aim is to ______.

Incorrect Answer

Feedback: This is not the correct answer. The correct answer is C.

Correct Answer

Feedback: Well done, correct answer

2. It is important to understand the link between the research aim and the wider topic because ______.

Feedback: This is not the correct answer. The correct answer is B.

3. How many research objectives are necessary to ensure a successful final-year project?

4. Research objectives reflect ______

5. Research design can be reflected in the research aim and objectives by ______.

Web Resources

Further reading, sign in to access this content, get a 30 day free trial, more like this, sage recommends.

We found other relevant content for you on other Sage platforms.

Have you created a personal profile? Login or create a profile so that you can save clips, playlists and searches

Navigating away from this page will delete your results

Please save your results to "My Self-Assessments" in your profile before navigating away from this page.

You must have a valid academic email address to sign up.

Get off-campus access

View or download all content my institution has access to.

view my profile
view my lists

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

Clearly understand what a dissertation (or thesis) is
Find a unique and valuable research topic
Craft a convincing research proposal
Write up a strong introduction chapter
Review the existing literature and compile a literature review
Design a rigorous research strategy and undertake your own research
Present the findings of your research
Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

Ask a very specific, well-articulated question (s) (your research topic)
See what other researchers have said about it (if they’ve already answered it)
If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
Answer your original question(s), based on your analysis findings

A dissertation or thesis is a formal piece of research, reflecting the standard four step academic research process.

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

Started with a vague, poorly articulated question
Not taken the time to see what research has already been done regarding the question
Collected data and opinions that support their gut and undertaken a flimsy analysis
Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

A dissertation is not an opinion piece, nor a place to push your agenda or try to convince someone of your position.

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2: Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

You have a clearly articulated, unique and important topic (this might sound familiar…)
You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

A brief background to the study, explaining the overall area of research
A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

The introduction chapter is where you set the scene for your research, detailing exactly what you’ll be researching and why it’s important.

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

Your research philosophy (e.g. positivism or interpretivism )
Your overall methodology (e.g. qualitative , quantitative or mixed methods)
Your data collection strategy (e.g. interviews , focus groups, surveys)
Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

The research philosophy is at the core of the methodology chapter

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

Your discussion here needs to link back to your research questions. It needs to answer the key questions you asked in your introduction.

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

In the final chapter, you’ll bring your research full circle by highlighting the key findings of your study and the implications thereof.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

Understand what a dissertation (or thesis) is – a research project that follows the research process.
Find a unique (original) and important research topic
Craft a convincing dissertation or thesis research proposal
Write a clear, compelling introduction chapter
Undertake a thorough review of the existing research and write up a literature review
Undertake your own research
Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project.

You Might Also Like:

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Print Friendly

How it works

A Step-By-Step Guide to Write the Perfect Dissertation

“A dissertation or a thesis is a long piece of academic writing based on comprehensive research.”

The significance of dissertation writing in the world of academia is unparalleled. A good dissertation paper needs months of research and marks the end of your respected academic journey. It is considered the most effective form of writing in academia and perhaps the longest piece of academic writing you will ever have to complete.

This thorough step-by-step guide on how to write a dissertation will serve as a tool to help you with the task at hand, whether you are an undergraduate student or a Masters or PhD student working on your dissertation project. This guide provides detailed information about how to write the different chapters of a dissertation, such as a problem statement , conceptual framework , introduction , literature review, methodology , discussion , findings , conclusion , title page , acknowledgements , etc.

What is a Dissertation? – Definition

Before we list the stages of writing a dissertation, we should look at what a dissertation is.

The Cambridge dictionary states that a dissertation is a long piece of writing on a particular subject, especially one that is done to receive a degree at college or university, but that is just the tip of the iceberg because a dissertation project has a lot more meaning and context.

To understand a dissertation’s definition, one must have the capability to understand what an essay is. A dissertation is like an extended essay that includes research and information at a much deeper level. Despite the few similarities, there are many differences between an essay and a dissertation.

Another term that people confuse with a dissertation is a thesis. Let's look at the differences between the two terms.

What is the Difference Between a Dissertation and a Thesis?

Dissertation and thesis are used interchangeably worldwide (and may vary between universities and regions), but the key difference is when they are completed. The thesis is a project that marks the end of a degree program, whereas the dissertation project can occur during the degree. Hanno Krieger (Researchgate, 2014) explained the difference between a dissertation and a thesis as follows:

“Thesis is the written form of research work to claim an academic degree, like PhD thesis, postgraduate thesis, and undergraduate thesis. On the other hand, a dissertation is only another expression of the written research work, similar to an essay. So the thesis is the more general expression.

In the end, it does not matter whether it is a bachelor's, master or PhD dissertation one is working on because the structure and the steps of conducting research are pretty much identical. However, doctoral-level dissertation papers are much more complicated and detailed.

Problems Students Face When Writing a Dissertation

You can expect to encounter some troubles if you don’t yet know the steps to write a dissertation. Even the smartest students are overwhelmed by the complexity of writing a dissertation.

A dissertation project is different from any essay paper you have ever committed to because of the details of planning, research and writing it involves. One can expect rewarding results at the end of the process if the correct guidelines are followed. Still, as indicated previously, there will be multiple challenges to deal with before reaching that milestone.

The three most significant problems students face when working on a dissertation project are the following.

Poor Project Planning

Delaying to start working on the dissertation project is the most common problem. Students think they have sufficient time to complete the paper and are finding ways to write a dissertation in a week, delaying the start to the point where they start stressing out about the looming deadline. When the planning is poor, students are always looking for ways to write their dissertations in the last few days. Although it is possible, it does have effects on the quality of the paper.

Inadequate Research Skills

The writing process becomes a huge problem if one has the required academic research experience. Professional dissertation writing goes well beyond collecting a few relevant reference resources.

You need to do both primary and secondary research for your paper. Depending on the dissertation’s topic and the academic qualification you are a candidate for, you may be required to base your dissertation paper on primary research.

In addition to secondary data, you will also need to collect data from the specified participants and test the hypothesis . The practice of primary collection is time-consuming since all the data must be analysed in detail before results can be withdrawn.

Failure to Meet the Strict Academic Writing Standards

Research is a crucial business everywhere. Failure to follow the language, style, structure, and formatting guidelines provided by your department or institution when writing the dissertation paper can worsen matters. It is recommended to read the dissertation handbook before starting the write-up thoroughly.

Steps of Writing a Dissertation

For those stressing out about developing an extensive paper capable of filling a gap in research whilst adding value to the existing academic literature—conducting exhaustive research and analysis—and professionally using the knowledge gained throughout their degree program, there is still good news in all the chaos.

We have put together a guide that will show you how to start your dissertation and complete it carefully from one stage to the next.

Find an Interesting and Manageable Dissertation Topic

A clearly defined topic is a prerequisite for any successful independent research project. An engaging yet manageable research topic can produce an original piece of research that results in a higher academic score.

Unlike essays or assignments, when working on their thesis or dissertation project, students get to choose their topic of research.

You should follow the tips to choose the correct topic for your research to avoid problems later. Your chosen dissertation topic should be narrow enough, allowing you to collect the required secondary and primary data relatively quickly.

Understandably, many people take a lot of time to search for the topic, and a significant amount of research time is spent on it. You should talk to your supervisor or check out the intriguing database of ResearchProspect’s free topics for your dissertation.

Alternatively, consider reading newspapers, academic journals, articles, course materials, and other media to identify relevant issues to your study area and find some inspiration to get going.

You should work closely with your supervisor to agree to a narrowed but clear research plan.Here is what Michelle Schneider, learning adviser at the University of Leeds, had to say about picking the research topics,

“Picking something you’re genuinely interested in will keep you motivated. Consider why it’s important to tackle your chosen topic," Michelle added.

Develop a First-Class Dissertation Proposal.

Once the research topic has been selected, you can develop a solid dissertation proposal . The research proposal allows you to convince your supervisor or the committee members of the significance of your dissertation.

Through the proposal, you will be expected to prove that your work will significantly value the academic and scientific communities by addressing complex and provocative research questions .

Dissertation proposals are much shorter but follow a similar structure to an extensive dissertation paper. If the proposal is optional in your university, you should still create one outline of the critical points that the actual dissertation paper will cover. To get a better understanding of dissertation proposals, you can also check the publicly available samples of dissertation proposals .

Typical contents of the dissertation paper are as follows;

A brief rationale for the problem your dissertation paper will investigate.
The hypothesis you will be testing.
Research objectives you wish to address.
How will you contribute to the knowledge of the scientific and academic community?
How will you find answers to the critical research question(s)?
What research approach will you adopt?
What kind of population of interest would you like to generalise your result(s) to (especially in the case of quantitative research)?
What sampling technique(s) would you employ, and why would you not use other methods?
What ethical considerations have you taken to gather data?
Who are the stakeholders in your research are/might be?
What are the future implications and limitations you see in your research?

Let’s review the structure of the dissertation. Keep the format of your proposal simple. Keeping it simple keeps your readers will remain engaged. The following are the fundamental focal points that must be included:

Title of your dissertation: Dissertation titles should be 12 words in length. The focus of your research should be identifiable from your research topic.

Research aim: The overall purpose of your study should be clearly stated in terms of the broad statements of the desired outcomes in the Research aim. Try and paint the picture of your research, emphasising what you wish to achieve as a researcher.

Research objectives: The key research questions you wish to address as part of the project should be listed. Narrow down the focus of your research and aim for at most four objectives. Your research objectives should be linked with the aim of the study or a hypothesis.

Literature review: Consult with your supervisor to check if you are required to use any specific academic sources as part of the literature review process. If that is not the case, find out the most relevant theories, journals, books, schools of thought, and publications that will be used to construct arguments in your literature research.Remember that the literature review is all about giving credit to other authors’ works on a similar topic

Research methods and techniques: Depending on your dissertation topic, you might be required to conduct empirical research to satisfy the study’s objectives. Empirical research uses primary data such as questionnaires, interview data, and surveys to collect.

On the other hand, if your dissertation is based on secondary (non-empirical) data, you can stick to the existing literature in your area of study. Clearly state the merits of your chosen research methods under the methodology section.

Expected results: As you explore the research topic and analyse the data in the previously published papers, you will begin to build your expectations around the study’s potential outcomes. List those expectations here.

Project timeline: Let the readers know exactly how you plan to complete all the dissertation project parts within the timeframe allowed. You should learn more about Microsoft Project and Gantt Charts to create easy-to-follow and high-level project timelines and schedules.

References: The academic sources used to gather information for the proposed paper will be listed under this section using the appropriate referencing style. Ask your supervisor which referencing style you are supposed to follow.

The proposals we write have:

Precision and Clarity
Zero Plagiarism
High-level Encryption
Authentic Sources

Investigation, Research and Data Collection

This is the most critical stage of the dissertation writing process. One should use up-to-date and relevant academic sources that are likely to jeopardise hard work.

Finding relevant and highly authentic reference resources is the key to succeeding in the dissertation project, so it is advised to take your time with this process. Here are some of the things that should be considered when conducting research.

dissertation project, so it is advised to take your time with this process. Here are some of the things that should be considered when conducting research.

You cannot read everything related to your topic. Although the practice of reading as much material as possible during this stage is rewarding, it is also imperative to understand that it is impossible to read everything that concerns your research.

This is true, especially for undergraduate and master’s level dissertations that must be delivered within a specific timeframe. So, it is important to know when to stop! Once the previous research and the associated limitations are well understood, it is time to move on.

However, review at least the salient research and work done in your area. By salient, we mean research done by pioneers of your field. For instance, if your topic relates to linguistics and you haven’t familiarised yourself with relevant research conducted by, say, Chomsky (the father of linguistics), your readers may find your lack of knowledge disconcerting.

So, to come off as genuinely knowledgeable in your own field, at least don’t forget to read essential works in the field/topic!

Use an Authentic Research database to Find References.

Most students start the reference material-finding process with desk-based research. However, this research method has its own limitation because it is a well-known fact that the internet is full of bogus information and fake information spreads fasters on the internet than truth does .

So, it is important to pick your reference material from reliable resources such as Google Scholar , Researchgate, Ibibio and Bartleby . Wikipedia is not considered a reliable academic source in the academic world, so it is recommended to refrain from citing Wikipedia content.Never underrate the importance of the actual library. The supporting staff at a university library can be of great help when it comes to finding exciting and reliable publications.

Record as you learn

All information and impressions should be recorded as notes using online tools such as Evernote to make sure everything is clear. You want to retain an important piece of information you had planned to present as an argument in the dissertation paper.

Write a Flawless Dissertation

Start to write a fantastic dissertation immediately once your proposal has been accepted and all the necessary desk-based research has been conducted. Now we will look at the different chapters of a dissertation in detail. You can also check out the samples of dissertation chapters to fully understand the format and structures of the various chapters.

Dissertation Introduction Chapter

The introduction chapter of the dissertation paper provides the background, problem statement and research questions. Here, you will inform the readers why it was important for this research to be conducted and which key research question(s) you expect to answer at the end of the study.

Definitions of all the terms and phrases in the project are provided in this first chapter of the dissertation paper. The research aim and objectives remain unchanged from the proposal paper and are expected to be listed under this section.

Dissertation Literature Review Chapter

This chapter allows you to demonstrate to your readers that you have done sufficient research on the chosen topic and understand previous similar studies’ findings. Any research limitations that your research incorporates are expected to be discussed in this section.

And make sure to summarise the viewpoints and findings of other researchers in the dissertation literature review chapter. Show the readers that there is a research gap in the existing work and your job is relevant to it to justify your research value.

Dissertation Methodology

The methodology chapter of the dissertation provides insight into the methods employed to collect data from various resources and flows naturally from the literature review chapter.Simply put, you will be expected to explain what you did and how you did it, helping the readers understand that your research is valid and reliable. When writing the methodology chapter for the dissertation, make sure to emphasise the following points:

The type of research performed by the researcher
Methods employed to gather and filter information
Techniques that were chosen for analysis
Materials, tools and resources used to conduct research (typically for empirical research dissertations)
Limitations of your chosen methods
Reliability and validity of your measuring tools and instruments (e.g. a survey questionnaire) are also typically mentioned within the mythology section. If you used a pre-existing data collection tool, cite its reliability/validity estimates here, too.Make use of the past tense when writing the methodology chapter.

Dissertation Findings

The key results of your research are presented in the dissertation findings chapter . It gives authors the ability to validate their own intellectual and analytical skills

Dissertation Conclusion

Cap off your dissertation paper with a study summary and a brief report of the findings. In the concluding chapter , you will be expected to demonstrate how your research will provide value to other academics in your area of study and its implications.It is recommended to include a short ‘recommendations’ section that will elaborate on the purpose and need for future research to elucidate the topic further.

Follow the referencing style following the requirements of your academic degree or field of study. Make sure to list every academic source used with a proper in-text citation. It is important to give credit to other authors’ ideas and concepts.

Note: Keep in mind whether you are creating a reference list or a bibliography. The former includes information about all the various sources you referred to, read from or took inspiration from for your own study. However, the latter contains things you used and those you only read but didn’t cite in your dissertation.

Proofread, Edit and Improve – Don’t Risk Months of Hard Work.

Experts recommend completing the total dissertation before starting to proofread and edit your work. You need to refresh your focus and reboot your creative brain before returning to another critical stage.

Leave space of at least a few days between the writing and the editing steps so when you get back to the desk, you can recognise your grammar, spelling and factual errors when you get back to the desk.

It is crucial to consider this period to ensure the final work is polished, coherent, well-structured and free of any structural or factual flaws. Daniel Higginbotham from Prospects UK states that:

“Leave yourself sufficient time to engage with your writing at several levels – from reassessing the logic of the whole piece to proofreading to checking you’ve paid attention to aspects such as the correct spelling of names and theories and the required referencing format.”

What is the Difference Between Editing and Proofreading?

Editing means that you are focusing on the essence of your dissertation paper. In contrast, proofreading is the process of reviewing the final draft piece to ensure accuracy and consistency in formatting, spelling, facts, punctuation, and grammar.

Editing: Prepare your work for submission by condensing, correcting and modifying (where necessary). When reviewing the paper, make sure that there are coherence and consistency between the arguments you presented.

If an information gap has been identified, fill that with an appropriate piece of information gathered during the research process. It is easy to lose sight of the original purpose if you become over-involved when writing.

Cut out the unwanted text and refine it, so your paper’s content is to the point and concise.Proofreading: Start proofreading your paper to identify formatting, structural, grammar, punctuation and referencing flaws. Read every single sentence of the paper no matter how tired you are because a few puerile mistakes can compromise your months of hard work.

Many students struggle with the editing and proofreading stages due to their lack of attention to detail. Consult a skilled dissertation editor if you are unable to find your flaws. You may want to invest in a professional dissertation editing and proofreading service to improve the piece’s quality to First Class.

Tips for Writing a Dissertation

Communication with supervisor – get feedback.

Communicate regularly with your supervisor to produce a first-class dissertation paper. Request them to comprehensively review the contents of your dissertation paper before final submission.

Their constructive criticism and feedback concerning different study areas will help you improve your piece’s overall quality. Keep your supervisor updated about your research progress and discuss any problems that you come up against.

Organising your Time

A dissertation is a lengthy project spanning over a period of months to years, and therefore it is important to avoid procrastination. Stay focused, and manage your time efficiently. Here are some time management tips for writing your dissertation to help you make the most of your time as you research and write.

Don’t be discouraged by the inherently slow nature of dissertation work, particularly in the initial stages.
Set clear goals and work out your research and write up a plan accordingly.
Allow sufficient time to incorporate feedback from your supervisor.
Leave enough time for editing, improving, proofreading, and formatting the paper according to your school’s guidelines. This is where you break or make your grade.
Work a certain number of hours on your paper daily.
Create a worksheet for your week.
Work on your dissertation for time periods as brief as 45 minutes or less.
Stick to the strategic dissertation timeline, so you don’t have to do the catchup work.
Meet your goals by prioritising your dissertation work.
Strike a balance between being overly organised and needing to be more organised.
Limit activities other than dissertation writing and your most necessary obligations.
Keep ‘tangent’ and ‘for the book’ files.
Create lists to help you manage your tasks.
Have ‘filler’ tasks to do when you feel burned out or in need of intellectual rest.
Keep a dissertation journal.
Pretend that you are working in a more structured work world.
Limit your usage of email and personal electronic devices.
Utilise and build on your past work when you write your dissertation.
Break large tasks into small manageable ones.
Seek advice from others, and do not be afraid to ask for help.

Dissertation Examples

Here are some samples of a dissertation to inspire you to write mind-blowing dissertations and to help bring all the above-mentioned guidelines home.

DE MONTFORT University Leicester – Examples of recent dissertations

Dissertation Research in Education: Dissertations (Examples)

How Long is a Dissertation?

The entire dissertation writing process is complicated and spans over a period of months to years, depending on whether you are an undergraduate, master’s, or PhD candidate. Marcus Beck, a PhD candidate, conducted fundamental research a few years ago, research that didn’t have much to do with his research but returned answers to some niggling questions every student has about the average length of a dissertation.

A software program specifically designed for this purpose helped Beck to access the university’s electronic database to uncover facts on dissertation length.

The above illustration shows how the results of his small study were a little unsurprising. Social sciences and humanities disciplines such as anthropology, politics, and literature had the longest dissertations, with some PhD dissertations comprising 150,000 words or more.Engineering and scientific disciplines, on the other hand, were considerably shorter. PhD-level dissertations generally don’t have a predefined length as they will vary with your research topic. Ask your school about this requirement if you are unsure about it from the start.

Focus more on the quality of content rather than the number of pages.

Hire an Expert Writer

Orders completed by our expert writers are

Formally drafted in an academic style
Free Amendments and 100% Plagiarism Free – or your money back!
100% Confidential and Timely Delivery!
Free anti-plagiarism report
Appreciated by thousands of clients. Check client reviews

Phrases to Avoid

No matter the style or structure you follow, it is best to keep your language simple. Avoid the use of buzzwords and jargon.

A Word on Stealing Content (Plagiarism)

Very straightforward advice to all students, DO NOT PLAGIARISE. Plagiarism is a serious offence. You will be penalised heavily if you are caught plagiarising. Don’t risk years of hard work, as many students in the past have lost their degrees for plagiarising. Here are some tips to help you make sure you don’t get caught.

Copying and pasting from an academic source is an unforgivable sin. Rephrasing text retrieved from another source also falls under plagiarism; it’s called paraphrasing. Summarising another’s idea(s) word-to-word, paraphrasing, and copy-pasting are the three primary forms plagiarism can take.
If you must directly copy full sentences from another source because they fill the bill, always enclose them inside quotation marks and acknowledge the writer’s work with in-text citations.

Are you struggling to find inspiration to get going? Still, trying to figure out where to begin? Is the deadline getting closer? Don’t be overwhelmed! ResearchProspect dissertation writing services have helped thousands of students achieve desired outcomes. Click here to get help from writers holding either a master's or PhD degree from a reputed UK university.

Frequently Asked Questions

What does a dissertation include.

A dissertation has main chapters and parts that support them. The main parts are:

Introduction
Literature review
Research Methodology
Your conclusion

Other parts are the abstract, references, appendices etc. We can supply a full dissertation or specific parts of one.

What is the difference between research and a dissertation?

A research paper is a sort of academic writing that consists of the study, source assessment, critical thinking, organisation, and composition, as opposed to a thesis or dissertation, which is a lengthy academic document that often serves as the final project for a university degree.

Can I edit and proofread my dissertation myself?

Of course, you can do proofreading and editing of your dissertation. There are certain rules to follow that have been discussed above. However, finding mistakes in something that you have written yourself can be complicated for some people. It is advisable to take professional help in the matter.

What If I only have difficulty writing a specific chapter of the dissertation?

ResearchProspect ensures customer satisfaction by addressing all relevant issues. We provide dissertation chapter-writing services to students if they need help completing a specific chapter. It could be any chapter from the introduction, literature review, and methodology to the discussion and conclusion.

Formulating Research Aims and Objectives

Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.

Research aim emphasizes what needs to be achieved within the scope of the research, by the end of the research process. Achievement of research aim provides answer to the research question.

Research objectives divide research aim into several parts and address each part separately. Research aim specifies WHAT needs to be studied and research objectives comprise a number of steps that address HOW research aim will be achieved.

As a rule of dumb, there would be one research aim and several research objectives. Achievement of each research objective will lead to the achievement of the research aim.

Consider the following as an example:

Research title: Effects of organizational culture on business profitability: a case study of Virgin Atlantic

Research aim: To assess the effects of Virgin Atlantic organizational culture on business profitability

Following research objectives would facilitate the achievement of this aim:

Analyzing the nature of organizational culture at Virgin Atlantic by September 1, 2022
Identifying factors impacting Virgin Atlantic organizational culture by September 16, 2022
Analyzing impacts of Virgin Atlantic organizational culture on employee performances by September 30, 2022
Providing recommendations to Virgin Atlantic strategic level management in terms of increasing the level of effectiveness of organizational culture by October 5, 2022

Figure below illustrates additional examples in formulating research aims and objectives:

Formulation of research question, aim and objectives

Common mistakes in the formulation of research aim relate to the following:

1. Choosing the topic too broadly . This is the most common mistake. For example, a research title of “an analysis of leadership practices” can be classified as too broad because the title fails to answer the following questions:

a) Which aspects of leadership practices? Leadership has many aspects such as employee motivation, ethical behaviour, strategic planning, change management etc. An attempt to cover all of these aspects of organizational leadership within a single research will result in an unfocused and poor work.

b) An analysis of leadership practices in which country? Leadership practices tend to be different in various countries due to cross-cultural differences, legislations and a range of other region-specific factors. Therefore, a study of leadership practices needs to be country-specific.

c) Analysis of leadership practices in which company or industry? Similar to the point above, analysis of leadership practices needs to take into account industry-specific and/or company-specific differences, and there is no way to conduct a leadership research that relates to all industries and organizations in an equal manner.

Accordingly, as an example “a study into the impacts of ethical behaviour of a leader on the level of employee motivation in US healthcare sector” would be a more appropriate title than simply “An analysis of leadership practices”.

2. Setting an unrealistic aim . Formulation of a research aim that involves in-depth interviews with Apple strategic level management by an undergraduate level student can be specified as a bit over-ambitious. This is because securing an interview with Apple CEO Tim Cook or members of Apple Board of Directors might not be easy. This is an extreme example of course, but you got the idea. Instead, you may aim to interview the manager of your local Apple store and adopt a more feasible strategy to get your dissertation completed.

3. Choosing research methods incompatible with the timeframe available . Conducting interviews with 20 sample group members and collecting primary data through 2 focus groups when only three months left until submission of your dissertation can be very difficult, if not impossible. Accordingly, timeframe available need to be taken into account when formulating research aims and objectives and selecting research methods.

Moreover, research objectives need to be formulated according to SMART principle,

where the abbreviation stands for specific, measurable, achievable, realistic, and time-bound.

Examples of SMART research objectives

At the conclusion part of your research project you will need to reflect on the level of achievement of research aims and objectives. In case your research aims and objectives are not fully achieved by the end of the study, you will need to discuss the reasons. These may include initial inappropriate formulation of research aims and objectives, effects of other variables that were not considered at the beginning of the research or changes in some circumstances during the research process.

John Dudovskiy

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

Knowledge Base
Dissertation

What Is a Dissertation? | 5 Essential Questions to Get Started

Published on 26 March 2020 by Jack Caulfield . Revised on 5 May 2022.

A dissertation is a large research project undertaken at the end of a degree. It involves in-depth consideration of a problem or question chosen by the student. It is usually the largest (and final) piece of written work produced during a degree.

The length and structure of a dissertation vary widely depending on the level and field of study. However, there are some key questions that can help you understand the requirements and get started on your dissertation project.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

When and why do you have to write a dissertation, who will supervise your dissertation, what type of research will you do, how should your dissertation be structured, what formatting and referencing rules do you have to follow, frequently asked questions about dissertations.

A dissertation, sometimes called a thesis, comes at the end of an undergraduate or postgraduate degree. It is a larger project than the other essays you’ve written, requiring a higher word count and a greater depth of research.

You’ll generally work on your dissertation during the final year of your degree, over a longer period than you would take for a standard essay . For example, the dissertation might be your main focus for the last six months of your degree.

Why is the dissertation important?

The dissertation is a test of your capacity for independent research. You are given a lot of autonomy in writing your dissertation: you come up with your own ideas, conduct your own research, and write and structure the text by yourself.

This means that it is an important preparation for your future, whether you continue in academia or not: it teaches you to manage your own time, generate original ideas, and work independently.

Prevent plagiarism, run a free check.

During the planning and writing of your dissertation, you’ll work with a supervisor from your department. The supervisor’s job is to give you feedback and advice throughout the process.

The dissertation supervisor is often assigned by the department, but you might be allowed to indicate preferences or approach potential supervisors. If so, try to pick someone who is familiar with your chosen topic, whom you get along with on a personal level, and whose feedback you’ve found useful in the past.

How will your supervisor help you?

Your supervisor is there to guide you through the dissertation project, but you’re still working independently. They can give feedback on your ideas, but not come up with ideas for you.

You may need to take the initiative to request an initial meeting with your supervisor. Then you can plan out your future meetings and set reasonable deadlines for things like completion of data collection, a structure outline, a first chapter, a first draft, and so on.

Make sure to prepare in advance for your meetings. Formulate your ideas as fully as you can, and determine where exactly you’re having difficulties so you can ask your supervisor for specific advice.

Your approach to your dissertation will vary depending on your field of study. The first thing to consider is whether you will do empirical research , which involves collecting original data, or non-empirical research , which involves analysing sources.

Empirical dissertations (sciences)

An empirical dissertation focuses on collecting and analysing original data. You’ll usually write this type of dissertation if you are studying a subject in the sciences or social sciences.

What are airline workers’ attitudes towards the challenges posed for their industry by climate change?
How effective is cognitive behavioural therapy in treating depression in young adults?
What are the short-term health effects of switching from smoking cigarettes to e-cigarettes?

There are many different empirical research methods you can use to answer these questions – for example, experiments , observations, surveys , and interviews.

When doing empirical research, you need to consider things like the variables you will investigate, the reliability and validity of your measurements, and your sampling method . The aim is to produce robust, reproducible scientific knowledge.

Non-empirical dissertations (arts and humanities)

A non-empirical dissertation works with existing research or other texts, presenting original analysis, critique and argumentation, but no original data. This approach is typical of arts and humanities subjects.

What attitudes did commentators in the British press take towards the French Revolution in 1789–1792?
How do the themes of gender and inheritance intersect in Shakespeare’s Macbeth ?
How did Plato’s Republic and Thomas More’s Utopia influence nineteenth century utopian socialist thought?

The first steps in this type of dissertation are to decide on your topic and begin collecting your primary and secondary sources .

Primary sources are the direct objects of your research. They give you first-hand evidence about your subject. Examples of primary sources include novels, artworks and historical documents.

Secondary sources provide information that informs your analysis. They describe, interpret, or evaluate information from primary sources. For example, you might consider previous analyses of the novel or author you are working on, or theoretical texts that you plan to apply to your primary sources.

Dissertations are divided into chapters and sections. Empirical dissertations usually follow a standard structure, while non-empirical dissertations are more flexible.

Structure of an empirical dissertation

Empirical dissertations generally include these chapters:

Introduction : An explanation of your topic and the research question(s) you want to answer.
Literature review : A survey and evaluation of previous research on your topic.
Methodology : An explanation of how you collected and analysed your data.
Results : A brief description of what you found.
Discussion : Interpretation of what these results reveal.
Conclusion : Answers to your research question(s) and summary of what your findings contribute to knowledge in your field.

Sometimes the order or naming of chapters might be slightly different, but all of the above information must be included in order to produce thorough, valid scientific research.

Other dissertation structures

If your dissertation doesn’t involve data collection, your structure is more flexible. You can think of it like an extended essay – the text should be logically organised in a way that serves your argument:

Introduction: An explanation of your topic and the question(s) you want to answer.
Main body: The development of your analysis, usually divided into 2–4 chapters.
Conclusion: Answers to your research question(s) and summary of what your analysis contributes to knowledge in your field.

The chapters of the main body can be organised around different themes, time periods, or texts. Below you can see some example structures for dissertations in different subjects.

Political philosophy

This example, on the topic of the British press’s coverage of the French Revolution, shows how you might structure each chapter around a specific theme.

Example of a dissertation structure in history

This example, on the topic of Plato’s and More’s influences on utopian socialist thought, shows a different approach to dividing the chapters by theme.

Example of a dissertation structure in political philosophy

This example, a master’s dissertation on the topic of how writers respond to persecution, shows how you can also use section headings within each chapter. Each of the three chapters deals with a specific text, while the sections are organised thematically.

Example of a dissertation structure in literature

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Like other academic texts, it’s important that your dissertation follows the formatting guidelines set out by your university. You can lose marks unnecessarily over mistakes, so it’s worth taking the time to get all these elements right.

Formatting guidelines concern things like:

line spacing
page numbers
punctuation
title pages
presentation of tables and figures

If you’re unsure about the formatting requirements, check with your supervisor or department. You can lose marks unnecessarily over mistakes, so it’s worth taking the time to get all these elements right.

How will you reference your sources?

Referencing means properly listing the sources you cite and refer to in your dissertation, so that the reader can find them. This avoids plagiarism by acknowledging where you’ve used the work of others.

Keep track of everything you read as you prepare your dissertation. The key information to note down for a reference is:

The publication date
Page numbers for the parts you refer to (especially when using direct quotes)

Different referencing styles each have their own specific rules for how to reference. The most commonly used styles in UK universities are listed below.

You can use the free APA Reference Generator to automatically create and store your references.

APA Reference Generator

The words ‘ dissertation ’ and ‘thesis’ both refer to a large written research project undertaken to complete a degree, but they are used differently depending on the country:

In the UK, you write a dissertation at the end of a bachelor’s or master’s degree, and you write a thesis to complete a PhD.
In the US, it’s the other way around: you may write a thesis at the end of a bachelor’s or master’s degree, and you write a dissertation to complete a PhD.

The main difference is in terms of scale – a dissertation is usually much longer than the other essays you complete during your degree.

Another key difference is that you are given much more independence when working on a dissertation. You choose your own dissertation topic , and you have to conduct the research and write the dissertation yourself (with some assistance from your supervisor).

Dissertation word counts vary widely across different fields, institutions, and levels of education:

An undergraduate dissertation is typically 8,000–15,000 words
A master’s dissertation is typically 12,000–50,000 words
A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

At the bachelor’s and master’s levels, the dissertation is usually the main focus of your final year. You might work on it (alongside other classes) for the entirety of the final year, or for the last six months. This includes formulating an idea, doing the research, and writing up.

A PhD thesis takes a longer time, as the thesis is the main focus of the degree. A PhD thesis might be being formulated and worked on for the whole four years of the degree program. The writing process alone can take around 18 months.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Caulfield, J. (2022, May 05). What Is a Dissertation? | 5 Essential Questions to Get Started. Scribbr. Retrieved 12 March 2024, from https://www.scribbr.co.uk/thesis-dissertation/what-is-a-dissertation/

Is this article helpful?

Jack Caulfield

Other students also liked, how to choose a dissertation topic | 8 steps to follow, how to write a dissertation proposal | a step-by-step guide, what is a literature review | guide, template, & examples.

Aims and Objectives for Master’s Dissertations

Aims and Objectives for Master’s Dissertations. This blog will look at writing an ‘Aim’ statement and ‘Objectives’ for a Master’s thesis. It should also be helpful for final year projects at undergraduate level.

I have done 2 previous blogs on ‘Topic Selection’ and ‘Dissertation Title Writing’ that may also be of interest.

Here is a short video clip on writing the Aims and Objectives.

Where should the Aims and Objectives be?

The Aims and Objectives for your Master’s Dissertations need to be in chapter 1, the introduction to the research project. Chapter 1 should be an introduction to the project, and not an introduction to the topic. The topic is covered in the Literature Review, usually chapter 2. However, there needs to be a few pages of background introduction to set the scene and the reasons for the research. Therefore, the Aims and Objectives should be around page 2, 3, or 4.

Tips for Writing the AIM Statement

There will be one overall AIM statement as described here. Sometimes a research project may contain several distinct aims. However, they need to fit together to an overall research AIM.

The AIM is really just a longer and more explanatory version of the research title. The AIM can be an expansion of the title to 3 to 6 sentences. Make sure you cover these three elements:

Why is this research necessary – some background showing a problem.
What is this research about – an expansion of the title.
How is the research to be performed – a brief statement of the intended research methods.

Initially aim for 1 sentence for each item. Expanding to two sentences for each will be OK. The AIM statement should not exceed a paragraph or a quarter to a third of a page.

Example of an Aim Statement

Example: I will take a project title: “An investigation into Project Management Life-Cycles in the Automotive Industry: Honda as a case study.”

The AIM will need to include:

Why: Oversupply and unfilled manufacturing capacity, and increasing innovation in the industry are causing all automotive companies problems. This states the problem.
What: This project seeks to examine how Project Life Cycles are implemented in the Honda Motor Company.
How: By case study analysis and comparison with other automotive companies.

Put those three sentences together and the AIM statement becomes:

Aim Statement: Oversupply and unfilled manufacturing capacity is leading to increasing innovation in the automotive industry. This requires all automotive companies to reduce their project life cycles to remain competitive. This project seeks to examine how Project Life Cycles are implemented in the Honda Motor Company. The research will use case study analysis and comparison of Honda Project Life Cycles implementation with that of other automotive companies.

The first part of the aim statement – the problem – is what needs to be covered in the first 2 or 3 pages of the introduction chapter. Some researchers may then introduce a secondary aim statement to complement the first. In this example there may be a secondary AIM to distribute or publish the research findings.

Writing Objectives for a Master’s Dissertation

Nine Objectives

I suggest that 6-9 Objectives is an initial target. There are often comments that 9 may be too many. However, as a Project Manager my natural inclination is to break a project into manageable chunks of work. Also, if there are 9 objectives and one objective is not met, then there are still 8 objectives that are met.

The objectives when read alone should tell a story through the dissertation. This can be done by ensuring:

2 or 3 Objectives apply to the Literature Review – Demonstrating knowledge. Verbs such as Research, Examine, Study, and Investigate are suitable.
1 Objectives apply to the Research Methodology – How the research is performed. These might include: Collect data, Select interviewees, Analyse results as examples.
2 or 3 Objectives focus on the Critical Evaluation or Discussion chapters. Verbs such as Analyse, Compare, Discuss, and Evaluate would be appropriate.
There may be one or two final objectives. To Conclude, and/or To Recommend.

I have already issued blogs about the requirements of a Master’s Dissertation from the QAA perspective and the three elements of a Master’s Dissertation . Using the above approach to write the objectives will demonstrate that these requirements have been met.

When writing objectives, keep to just one verb, and avoid the use of ‘and’. If you are using ‘and’ then perhaps this objective should be broken into two separate objectives.

Don’t forget that the objectives will need to be repeated and commented on in the conclusion chapter of the dissertation.

Examples of Research Objectives

For the example AIM from earlier, here are some suggested project objectives. Note how they start broad, and become more specific:

To examine the current status of the Automotive Industry
Study Project Management as it applies to the Automotive Industry
To research Project Life Cycles specifically as used within the Automotive Industry
Identify suitable case studies concerning Automotive Project Life Cycles for evaluation
To analyse the case studies
Compare Project Life Cycles as demonstrated b the case study companies
To critical evaluate the use of Project Life Cycles at Honda Motor Company
Recommend improvements to the Honda Motor Company in their use of Project Life Cycles

Just reading the verbs tells a story through the dissertation. To examine, to study, to research, to identify, to analyse, to compare, to evaluate and to recommend.

Honda Motor Car

Higher Level Verbs

Don’t forget to use Blooms Higher level verbs when looking at the critical evaluation section. It is also important not to duplicate a verb. There are around 40-50 different verbs that you could use to write your objectives, and therefore it looks lazy to use the same verb more than once.

The Project Aim is an expansion of the title covering Why, What and How. The objectives should cover the whole dissertation from the Literature Review, through the Research Methodology, and to the Critical Evaluation and Conclusions.

AbleSim Project Management Simulations YouTube Channel

AbleSim have a YouTube channel dedicated to work with Project Management Simulations, Masters Dissertation Support and MS Project.

Subscribe to this channel here!

Project Management Training YouTube Channel

Andrew Bell has a YouTube channel dedicated to Project Management Training with over 10 hours of video arranged by 97 videos in 20 playlists.

Follow 🔔 AbleSim 🔔 on twitter @AbleSim

Join the conversation #pmsim

Tweets could not be loaded at this time.

Like us on Facebook

Privacy Overview
Strictly Necessary Cookies
3rd Party Cookies

This website uses cookies so that we can provide you with the best user experience possible.

Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly necessary cookies should be enabled at all times so that we can save your preferences for cookie settings.

If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.

Keeping this cookie enabled helps us to improve our website.

Please enable Strictly Necessary Cookies first so that we can save your preferences!

Utility Menu

de5f0c5840276572324fc6e2ece1a882

How to Use This Site
Core Competencies
Write Your Specific Aims Page

The specific aims page, especially the aims themselves, are the crux of your grant application. Use the following tips to write a strong, clear specific aims page. Use the Specific Aims Page Checklist to assess your writing and to ensure that you have included all of the necessary components.

Create a ‘Funnel Shape’ Conceptually

Create a focused lead paragraph that has a "funnel shape" conceptually. Lead the reader from the general to the specific, so that by the time your specific aims appear, it's clear what gap in the literature you're addressing and how this new knowledge will fit into the field. This introduction should also indicate how this proposal builds upon your previous data.

Example: "The mechanism by which cirrhosis of the liver occurs in a subset of patients with Cystic Fibrosis is unknown. Our data over the past 3 years has demonstrated that gene X is a candidate modifier gene by crossing Cystic Fibrosis knockout mice with gene X deficient mice. This proposal will build upon these results and test the hypothesis that Gene X is a modifier gene through its fibrogenic activation properties."

Write a Clear, Testable Hypothesis

Strive to create one clear hypothesis first that will be tested through your specific aims . Know the difference between specific aims and long-term goals .

Note: Depending on the grant you are seeking, this rule may not be possible or desirable. For example, if you are applying for an R01 grant in health services/outcomes research, the typical grant in this area has a data collection project at its core that often addresses more than one goal . Therefore, the nature of the project is often briefly described in the last sentence of the introduction, rather than in the specific aims.

Example: "We will conduct a multi-center, prospective, longitudinal study of 1000 patients undergoing bone marrow transplantation for hematologic malignancies in order to..."

Do: "Three cloves of garlic per day cure colon cancer through activation of the caspase death pathway in tumor cells."

Don't: "There are various chemicals within garlic that have different effects on all cells including tumor cells."

Tips on Writing Specific Aims

Make Aims Concise and Highly Focused
Ensure Clear Results
Write Aims that Test Single Hypothesis
Indicate Why, What and How
Avoid Sub-Aims

Your specific aims is the crux of your proposal so make sure they are concise and highly focused. Get them critiqued, and rewrite until the aims are solid and provide a foundation for the rest of your proposal.

Ensure that your specific aims will provide clear results and that they test your hypothesis . Do: Hypothesis: "Three cloves of garlic per day cure colon cancer through activation of the caspase death pathway in tumor cells." Specific Aims: "1. Test in vitro in T84 colon cancer cells and in vivo in a mouse model of colon cancer that garlic activates the caspase death pathway. 2. Activation of this caspase pathway leads to tumor regression."

Don't: Hypothesis: "There are various chemicals within garlic that have different effects on all cells including tumor cells." Specific aims: "1. We will explore whether incubating different cell types in vitro with garlic affects cell survival. 2. Garlic proteins will be extracted and analyzed by mass spectroscopy."

Write specific aims that test a single, overarching hypothesis , and not individual aims connected to their own hypotheses. Note: Depending on the grant you are seeking, this rule may not be possible or desirable. For example, if you are applying for an R01 grant in health services/outcomes research, the typical grant in this area has a data collection project at its core that often addresses more than one goal . Therefore, the nature of the project is often briefly described in the last sentence of the introduction, rather than in the specific aims.

Example: "We will conduct a multi-center prospective, longitudinal study of 1000 patients undergoing bone marrow transplantation for hematologic malignancies in order to..."

Convey specific aims that indicate why you want to do the work, what you want to do, and how you will do it.

Include no more than three aims and no sub-aims , if possible. Generally, you should not have four or more aims with sub-aims and/or their own hypotheses .

NIH K GRANT SPECIFIC AIMS PAGE RUBRIC

The rubric below provides recommendations for a Specific Aims page of a NIH K grant application . In addition to overall considerations, this rubric is broken up into four parts that correspond to the four sections of a Specific Aims page: the introduction paragraph, the body paragraph(s), the specific aims themselves, and the closing, or impact paragraph.

Use this rubric after you’ve completed a Specific Aims page draft to ensure that you have included all the necessary components. Review the completed rubric and carefully note any unchecked boxes. Review the resources linked throughout this document and use them to improve your Specific Aims page.

Please Note: While this rubric is meant to be a comprehensive resource, we acknowledge that there is no singular correct way to write a grant application and in some cases, deviation from this rubric may be warranted.

Download PDF

Apply to our Specific Aims Consultation Service!

Are You Ready?
Know Your Audience
Provide a Cover Letter
Make an Impact
Use Style Tips
Format Your Grant
Pre-Review Your Grant Application
Consultations

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

Knowledge Base
How to Write a Thesis Statement | 4 Steps & Examples

How to Write a Thesis Statement | 4 Steps & Examples

Published on January 11, 2019 by Shona McCombes . Revised on August 15, 2023 by Eoghan Ryan.

A thesis statement is a sentence that sums up the central point of your paper or essay . It usually comes near the end of your introduction .

Your thesis will look a bit different depending on the type of essay you’re writing. But the thesis statement should always clearly state the main idea you want to get across. Everything else in your essay should relate back to this idea.

You can write your thesis statement by following four simple steps:

Start with a question
Write your initial answer
Develop your answer
Refine your thesis statement

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

What is a thesis statement, placement of the thesis statement, step 1: start with a question, step 2: write your initial answer, step 3: develop your answer, step 4: refine your thesis statement, types of thesis statements, other interesting articles, frequently asked questions about thesis statements.

A thesis statement summarizes the central points of your essay. It is a signpost telling the reader what the essay will argue and why.

The best thesis statements are:

Concise: A good thesis statement is short and sweet—don’t use more words than necessary. State your point clearly and directly in one or two sentences.
Contentious: Your thesis shouldn’t be a simple statement of fact that everyone already knows. A good thesis statement is a claim that requires further evidence or analysis to back it up.
Coherent: Everything mentioned in your thesis statement must be supported and explained in the rest of your paper.

Prevent plagiarism. Run a free check.

The thesis statement generally appears at the end of your essay introduction or research paper introduction .

The spread of the internet has had a world-changing effect, not least on the world of education. The use of the internet in academic contexts and among young people more generally is hotly debated. For many who did not grow up with this technology, its effects seem alarming and potentially harmful. This concern, while understandable, is misguided. The negatives of internet use are outweighed by its many benefits for education: the internet facilitates easier access to information, exposure to different perspectives, and a flexible learning environment for both students and teachers.

You should come up with an initial thesis, sometimes called a working thesis , early in the writing process . As soon as you’ve decided on your essay topic , you need to work out what you want to say about it—a clear thesis will give your essay direction and structure.

You might already have a question in your assignment, but if not, try to come up with your own. What would you like to find out or decide about your topic?

For example, you might ask:

After some initial research, you can formulate a tentative answer to this question. At this stage it can be simple, and it should guide the research process and writing process .

Now you need to consider why this is your answer and how you will convince your reader to agree with you. As you read more about your topic and begin writing, your answer should get more detailed.

In your essay about the internet and education, the thesis states your position and sketches out the key arguments you’ll use to support it.

The negatives of internet use are outweighed by its many benefits for education because it facilitates easier access to information.

In your essay about braille, the thesis statement summarizes the key historical development that you’ll explain.

The invention of braille in the 19th century transformed the lives of blind people, allowing them to participate more actively in public life.

A strong thesis statement should tell the reader:

Why you hold this position
What they’ll learn from your essay
The key points of your argument or narrative

The final thesis statement doesn’t just state your position, but summarizes your overall argument or the entire topic you’re going to explain. To strengthen a weak thesis statement, it can help to consider the broader context of your topic.

These examples are more specific and show that you’ll explore your topic in depth.

Your thesis statement should match the goals of your essay, which vary depending on the type of essay you’re writing:

In an argumentative essay , your thesis statement should take a strong position. Your aim in the essay is to convince your reader of this thesis based on evidence and logical reasoning.
In an expository essay , you’ll aim to explain the facts of a topic or process. Your thesis statement doesn’t have to include a strong opinion in this case, but it should clearly state the central point you want to make, and mention the key elements you’ll explain.

If you want to know more about AI tools , college essays , or fallacies make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Ad hominem fallacy
Post hoc fallacy
Appeal to authority fallacy
False cause fallacy
Sunk cost fallacy

College essays

Choosing Essay Topic
Write a College Essay
Write a Diversity Essay
College Essay Format & Structure
Comparing and Contrasting in an Essay

(AI) Tools

Grammar Checker
Paraphrasing Tool
Text Summarizer
AI Detector
Plagiarism Checker
Citation Generator

A thesis statement is a sentence that sums up the central point of your paper or essay . Everything else you write should relate to this key idea.

The thesis statement is essential in any academic essay or research paper for two main reasons:

It gives your writing direction and focus.
It gives the reader a concise summary of your main point.

Without a clear thesis statement, an essay can end up rambling and unfocused, leaving your reader unsure of exactly what you want to say.

Follow these four steps to come up with a thesis statement :

Ask a question about your topic .
Write your initial answer.
Develop your answer by including reasons.
Refine your answer, adding more detail and nuance.

The thesis statement should be placed at the end of your essay introduction .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, August 15). How to Write a Thesis Statement | 4 Steps & Examples. Scribbr. Retrieved March 16, 2024, from https://www.scribbr.com/academic-essay/thesis-statement/

Is this article helpful?

Shona McCombes

Other students also liked, how to write an essay introduction | 4 steps & examples, how to write topic sentences | 4 steps, examples & purpose, academic paragraph structure | step-by-step guide & examples, what is your plagiarism score.

IMAGES

Research aims and objectives dissertation writing
How to Write a Good Dissertation: Full Guide for Beginners
How to Write Dissertation Aims and Objectives?
Research Aim and Objectives
Aims and Objectives
Dissertation Writing an introduction aim and objectives

VIDEO

How to make Dissertation? Complete Details about Dissertation / Thesis for Bachelors/ Masters Degree
HOW TO WRITE A WINNING DISSERTATION TOPIC!
How to Write Dissertation Introduction
How to write your dissertation FAST💨
5+1 Simple Steps To Ace Your Next Research Essay (Undergraduate Level)
How to Write a Dissertation Introduction

COMMENTS

Aims and Objectives
Summary. One of the most important aspects of a thesis, dissertation or research paper is the correct formulation of the aims and objectives. This is because your aims and objectives will establish the scope, depth and direction that your research will ultimately take. An effective set of aims and objectives will give your research focus and ...
How to Write the Dissertation Aims and Objectives
Writing objectives. The objectives describe how you would achieve your research aim. You can do this through the following steps, The first one to two objectives can be applied to the literature review. (Verbs to be used: investigate, examine, study) One objective can be applied to the methodology portion.
Research Questions, Objectives & Aims (+ Examples)
The research aims, objectives and research questions (collectively called the "golden thread") are arguably the most important thing you need to get right when you're crafting a research proposal, dissertation or thesis.We receive questions almost every day about this "holy trinity" of research and there's certainly a lot of confusion out there, so we've crafted this post to help ...
Writing your research aims and objectives
Whatever they are, clearly articulate them and do so early. Definitely include them in your introduction and, if you're smart, you'll write them in your abstract. 3. Be very explicit. In the opening paragraphs, say, in simple terms, 'the aim of this thesis is to…' 4. Think of your aims then as a statement of intent.
How to Write Aims and Objectives for PhD Dissertation?
Introduction. In a PhD or Post Graduate dissertation, the aims and objectives play a crucial role in shaping the research process and ensuring focus. They provide a clear roadmap for your study and serve as the guiding principles that steer your research in the right direction. Aims represent the broader purpose or the overarching goal of your ...
Writing Effective Research Aims and Objectives
The writing of effective research aims and objectives can cause confusion and concern to new and experienced researchers and learners. This step in your research journey is usually the first written method used to convey your research idea to your tutor. Therefore, aims and objectives should clearly convey your topic, academic foundation, and ...
Dissertation Structure & Layout 101 (+ Examples)
Time to recap…. And there you have it - the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows: Title page. Acknowledgments page. Abstract (or executive summary) Table of contents, list of figures and tables.
How to Write a Dissertation or Thesis Proposal
When starting your thesis or dissertation process, one of the first requirements is a research proposal or a prospectus. It describes what or who you want to examine, delving into why, when, where, and how you will do so, stemming from your research question and a relevant topic. The proposal or prospectus stage is crucial for the development ...
How to Write a Dissertation Proposal
Table of contents. Step 1: Coming up with an idea. Step 2: Presenting your idea in the introduction. Step 3: Exploring related research in the literature review. Step 4: Describing your methodology. Step 5: Outlining the potential implications of your research. Step 6: Creating a reference list or bibliography.
How To Write A Dissertation Or Thesis
How To Write A Dissertation: 8 Steps. Clearly understand what a dissertation (or thesis) is. Find a unique and valuable research topic. Craft a convincing research proposal. Write up a strong introduction chapter. Review the existing literature and compile a literature review.
What Is a Dissertation?
A dissertation is a long-form piece of academic writing based on original research conducted by you. It is usually submitted as the final step in order to finish a PhD program. Your dissertation is probably the longest piece of writing you've ever completed. It requires solid research, writing, and analysis skills, and it can be intimidating ...
How to Write a Thesis or Dissertation Introduction
Overview of the structure. To help guide your reader, end your introduction with an outline of the structure of the thesis or dissertation to follow. Share a brief summary of each chapter, clearly showing how each contributes to your central aims. However, be careful to keep this overview concise: 1-2 sentences should be enough.
Aims and Hypotheses
As with all aspects of your research thesis, this section of it should not contain any surprises for its readers, because it should naturally flow on from your setting of your research scene, and your presentation of the relevant research literature, and its key messages. Aims. An aim identifies the purpose of the investigation.
How to Write a Dissertation
The structure of a dissertation depends on your field, but it is usually divided into at least four or five chapters (including an introduction and conclusion chapter). The most common dissertation structure in the sciences and social sciences includes: An introduction to your topic. A literature review that surveys relevant sources.
How to Write a Dissertation
Work a certain number of hours on your paper daily. Create a worksheet for your week. Work on your dissertation for time periods as brief as 45 minutes or less. Stick to the strategic dissertation timeline, so you don't have to do the catchup work. Meet your goals by prioritising your dissertation work.
Formulating Research Aims and Objectives
Formulating research aim and objectives in an appropriate manner is one of the most important aspects of your thesis. This is because research aim and objectives determine the scope, depth and the overall direction of the research. Research question is the central question of the study that has to be answered on the basis of research findings.
How To Write Aims And Objectives For Your Research Project ...
Aims and objectives are an important part of a research project and will usually first be identified during the development of a research proposal or a resea...
Writing Strong Research Questions
A good research question is essential to guide your research paper, dissertation, or thesis. All research questions should be: Focused on a single problem or issue. Researchable using primary and/or secondary sources. Feasible to answer within the timeframe and practical constraints. Specific enough to answer thoroughly.
How to Write a Thesis or Dissertation Introduction
Overview of the structure. To help guide your reader, end your introduction with an outline of the structure of the thesis or dissertation to follow. Share a brief summary of each chapter, clearly showing how each contributes to your central aims. However, be careful to keep this overview concise: 1-2 sentences should be enough.
What Is a Dissertation?
The aim is to produce robust, reproducible scientific knowledge. Non-empirical dissertations (arts and humanities) ... In the UK, you write a dissertation at the end of a bachelor's or master's degree, and you write a thesis to complete a PhD. In the US, it's the other way around: you may write a thesis at the end of a bachelor's or ...
Aims and Objectives for Master's Dissertations
The Aims and Objectives for your Master's Dissertations need to be in chapter 1, the introduction to the research project. Chapter 1 should be an introduction to the project, and not an introduction to the topic. The topic is covered in the Literature Review, usually chapter 2. However, there needs to be a few pages of background introduction ...
Write Your Specific Aims Page
Each specific aim: Is 1-3 sentences long. Starts with a clear title. Describes the approach (often called the "rationale" or "working hypothesis"). Shows which part of the central hypothesis will be tested through the aim. Typically does not have an individual hypothesis. Does not rely on the success of previous aims.
PDF Strategies for Essay Writing
understand why it's worth writing that essay. A strong thesis will be arguable rather than descriptive, and it will be the right scope for the essay you are writing. If your thesis is descriptive, then you will not need to convince your readers of anything—you will be naming or summarizing something your readers can already see for themselves.
How to Write a Thesis Statement
Placement of the thesis statement. Step 1: Start with a question. Step 2: Write your initial answer. Step 3: Develop your answer. Step 4: Refine your thesis statement. Types of thesis statements. Other interesting articles. Frequently asked questions about thesis statements.

Introduction

What Are Aims and Objectives?

Example of a Research Aim

Research Objectives

Example of a Research Objective

Restructuring Research Objectives as Research Questions

Difference Between Aims and Objectives

How to Write Aims and Objectives

Research Objectives

Table of Research Verbs to Use in Aims and Objectives

Checking Research Objective Example Against Recommended Approach

Mistakes in Writing Research Aims and Objectives

2. Making Your Research Objectives Too Ambitious

3. Formulating Repetitive Research Objectives

Browse PhDs Now

What are you doing and how are you doing it? Articulating your aims and objectives.

What are aims & objectives?

Your PhD thesis. All on one page.

Hello, Doctor…

Research aims

Research objectives

What is the difference between research aims and objectives?

I can’t articulate them clearly, my research is complicated!

Share this:

Submit a Comment Cancel reply

Search The PhD Knowledge Base

The PhD Knowledge Base Categories

How to Write Aims and Objectives for your Dissertation or Thesis?

Introduction

Upcoming Events

Recent Posts

No internet connection.

Writing Effective Research Aims and Objectives

Learning Outcomes

Introduction

Identify the Meaning and Purpose of a Research Aim with Business Research

Section Summary

Understand the Link Between an Effective Research Aim and the Wider Topic and Literature/secondary Sources, Where Appropriate

Understanding How to Identify SMART Research Objectives, Research Questions, and Consideration of Research Hypothesis

Recognizing the Link Between Writing an Effective Research Aim and the Research Design

Multiple-Choice Quiz Questions

Web Resources

How To Write A Dissertation Or Thesis

How To Write A Dissertation: 8 Steps

Step 1: Understand exactly what a dissertation is

Step 2: Find a unique, valuable research topic

Need a helping hand?

Step 3: Write a convincing research proposal

Step 4: Craft a strong introduction chapter

Step 5: Undertake an in-depth literature review

Literature Review Step 1: Reading up

Literature Review Step 2: Writing up

Step 6: Carry out your own research

1 – Design your research strategy

2 – Execute: Collect and analyse your data

Step 7: Present your findings

Step 8: The Final Step Draw a conclusion and discuss the implications

Let’s recap – how to write a dissertation or thesis

Psst… there’s more (for free)

You Might Also Like:

20 Comments

Submit a Comment Cancel reply

A Step-By-Step Guide to Write the Perfect Dissertation

What is a Dissertation? – Definition

What is the Difference Between a Dissertation and a Thesis?

Problems Students Face When Writing a Dissertation

Poor Project Planning

Inadequate Research Skills

Failure to Meet the Strict Academic Writing Standards

Steps of Writing a Dissertation

Find an Interesting and Manageable Dissertation Topic

Develop a First-Class Dissertation Proposal.

The proposals we write have:

Investigation, Research and Data Collection

Write a Flawless Dissertation

Dissertation Introduction Chapter

Dissertation Literature Review Chapter

Dissertation Methodology

Dissertation Findings

Dissertation Conclusion