work based dissertation

Dissertation Structure & Layout 101: How to structure your dissertation, thesis or research project.

By: Derek Jansen (MBA) Reviewed By: David Phair (PhD) | July 2019

So, you’ve got a decent understanding of what a dissertation is , you’ve chosen your topic and hopefully you’ve received approval for your research proposal . Awesome! Now its time to start the actual dissertation or thesis writing journey.

To craft a high-quality document, the very first thing you need to understand is dissertation structure . In this post, we’ll walk you through the generic dissertation structure and layout, step by step. We’ll start with the big picture, and then zoom into each chapter to briefly discuss the core contents. If you’re just starting out on your research journey, you should start with this post, which covers the big-picture process of how to write a dissertation or thesis .

*The Caveat *

In this post, we’ll be discussing a traditional dissertation/thesis structure and layout, which is generally used for social science research across universities, whether in the US, UK, Europe or Australia. However, some universities may have small variations on this structure (extra chapters, merged chapters, slightly different ordering, etc).

So, always check with your university if they have a prescribed structure or layout that they expect you to work with. If not, it’s safe to assume the structure we’ll discuss here is suitable. And even if they do have a prescribed structure, you’ll still get value from this post as we’ll explain the core contents of each section.  

Overview: S tructuring a dissertation or thesis

• Acknowledgements page
• Abstract (or executive summary)
• Table of contents , list of figures and tables
• Chapter 1: Introduction
• Chapter 2: Literature review
• Chapter 3: Methodology
• Chapter 4: Results
• Chapter 5: Discussion
• Chapter 6: Conclusion
• Reference list

As I mentioned, some universities will have slight variations on this structure. For example, they want an additional “personal reflection chapter”, or they might prefer the results and discussion chapter to be merged into one. Regardless, the overarching flow will always be the same, as this flow reflects the research process , which we discussed here – i.e.:

• The introduction chapter presents the core research question and aims .
• The literature review chapter assesses what the current research says about this question.
• The methodology, results and discussion chapters go about undertaking new research about this question.
• The conclusion chapter (attempts to) answer the core research question .

In other words, the dissertation structure and layout reflect the research process of asking a well-defined question(s), investigating, and then answering the question – see below.

To restate that – the structure and layout of a dissertation reflect the flow of the overall research process . This is essential to understand, as each chapter will make a lot more sense if you “get” this concept. If you’re not familiar with the research process, read this post before going further.

Right. Now that we’ve covered the big picture, let’s dive a little deeper into the details of each section and chapter. Oh and by the way, you can also grab our free dissertation/thesis template here to help speed things up.

The title page of your dissertation is the very first impression the marker will get of your work, so it pays to invest some time thinking about your title. But what makes for a good title? A strong title needs to be 3 things:

• Succinct (not overly lengthy or verbose)
• Specific (not vague or ambiguous)
• Representative of the research you’re undertaking (clearly linked to your research questions)

Typically, a good title includes mention of the following:

• The broader area of the research (i.e. the overarching topic)
• The specific focus of your research (i.e. your specific context)
• Indication of research design (e.g. quantitative , qualitative , or  mixed methods ).

For example:

A quantitative investigation [research design] into the antecedents of organisational trust [broader area] in the UK retail forex trading market [specific context/area of focus].

Again, some universities may have specific requirements regarding the format and structure of the title, so it’s worth double-checking expectations with your institution (if there’s no mention in the brief or study material).

Acknowledgements

This page provides you with an opportunity to say thank you to those who helped you along your research journey. Generally, it’s optional (and won’t count towards your marks), but it is academic best practice to include this.

So, who do you say thanks to? Well, there’s no prescribed requirements, but it’s common to mention the following people:

• Your dissertation supervisor or committee.
• Any professors, lecturers or academics that helped you understand the topic or methodologies.
• Any tutors, mentors or advisors.
• Your family and friends, especially spouse (for adult learners studying part-time).

There’s no need for lengthy rambling. Just state who you’re thankful to and for what (e.g. thank you to my supervisor, John Doe, for his endless patience and attentiveness) – be sincere. In terms of length, you should keep this to a page or less.

Abstract or executive summary

The dissertation abstract (or executive summary for some degrees) serves to provide the first-time reader (and marker or moderator) with a big-picture view of your research project. It should give them an understanding of the key insights and findings from the research, without them needing to read the rest of the report – in other words, it should be able to stand alone .

For it to stand alone, your abstract should cover the following key points (at a minimum):

• Your research questions and aims – what key question(s) did your research aim to answer?
• Your methodology – how did you go about investigating the topic and finding answers to your research question(s)?
• Your findings – following your own research, what did do you discover?
• Your conclusions – based on your findings, what conclusions did you draw? What answers did you find to your research question(s)?

So, in much the same way the dissertation structure mimics the research process, your abstract or executive summary should reflect the research process, from the initial stage of asking the original question to the final stage of answering that question.

In practical terms, it’s a good idea to write this section up last , once all your core chapters are complete. Otherwise, you’ll end up writing and rewriting this section multiple times (just wasting time). For a step by step guide on how to write a strong executive summary, check out this post .

Need a helping hand?

Table of contents

This section is straightforward. You’ll typically present your table of contents (TOC) first, followed by the two lists – figures and tables. I recommend that you use Microsoft Word’s automatic table of contents generator to generate your TOC. If you’re not familiar with this functionality, the video below explains it simply:

If you find that your table of contents is overly lengthy, consider removing one level of depth. Oftentimes, this can be done without detracting from the usefulness of the TOC.

Right, now that the “admin” sections are out of the way, its time to move on to your core chapters. These chapters are the heart of your dissertation and are where you’ll earn the marks. The first chapter is the introduction chapter – as you would expect, this is the time to introduce your research…

It’s important to understand that even though you’ve provided an overview of your research in your abstract, your introduction needs to be written as if the reader has not read that (remember, the abstract is essentially a standalone document). So, your introduction chapter needs to start from the very beginning, and should address the following questions:

• What will you be investigating (in plain-language, big picture-level)?
• Why is that worth investigating? How is it important to academia or business? How is it sufficiently original?
• What are your research aims and research question(s)? Note that the research questions can sometimes be presented at the end of the literature review (next chapter).
• What is the scope of your study? In other words, what will and won’t you cover ?
• How will you approach your research? In other words, what methodology will you adopt?
• How will you structure your dissertation? What are the core chapters and what will you do in each of them?

These are just the bare basic requirements for your intro chapter. Some universities will want additional bells and whistles in the intro chapter, so be sure to carefully read your brief or consult your research supervisor.

If done right, your introduction chapter will set a clear direction for the rest of your dissertation. Specifically, it will make it clear to the reader (and marker) exactly what you’ll be investigating, why that’s important, and how you’ll be going about the investigation. Conversely, if your introduction chapter leaves a first-time reader wondering what exactly you’ll be researching, you’ve still got some work to do.

Now that you’ve set a clear direction with your introduction chapter, the next step is the literature review . In this section, you will analyse the existing research (typically academic journal articles and high-quality industry publications), with a view to understanding the following questions:

• What does the literature currently say about the topic you’re investigating?
• Is the literature lacking or well established? Is it divided or in disagreement?
• How does your research fit into the bigger picture?
• How does your research contribute something original?
• How does the methodology of previous studies help you develop your own?

Depending on the nature of your study, you may also present a conceptual framework towards the end of your literature review, which you will then test in your actual research.

Again, some universities will want you to focus on some of these areas more than others, some will have additional or fewer requirements, and so on. Therefore, as always, its important to review your brief and/or discuss with your supervisor, so that you know exactly what’s expected of your literature review chapter.

Now that you’ve investigated the current state of knowledge in your literature review chapter and are familiar with the existing key theories, models and frameworks, its time to design your own research. Enter the methodology chapter – the most “science-ey” of the chapters…

In this chapter, you need to address two critical questions:

• Exactly HOW will you carry out your research (i.e. what is your intended research design)?
• Exactly WHY have you chosen to do things this way (i.e. how do you justify your design)?

Remember, the dissertation part of your degree is first and foremost about developing and demonstrating research skills . Therefore, the markers want to see that you know which methods to use, can clearly articulate why you’ve chosen then, and know how to deploy them effectively.

Importantly, this chapter requires detail – don’t hold back on the specifics. State exactly what you’ll be doing, with who, when, for how long, etc. Moreover, for every design choice you make, make sure you justify it.

In practice, you will likely end up coming back to this chapter once you’ve undertaken all your data collection and analysis, and revise it based on changes you made during the analysis phase. This is perfectly fine. Its natural for you to add an additional analysis technique, scrap an old one, etc based on where your data lead you. Of course, I’m talking about small changes here – not a fundamental switch from qualitative to quantitative, which will likely send your supervisor in a spin!

You’ve now collected your data and undertaken your analysis, whether qualitative, quantitative or mixed methods. In this chapter, you’ll present the raw results of your analysis . For example, in the case of a quant study, you’ll present the demographic data, descriptive statistics, inferential statistics , etc.

Typically, Chapter 4 is simply a presentation and description of the data, not a discussion of the meaning of the data. In other words, it’s descriptive, rather than analytical – the meaning is discussed in Chapter 5. However, some universities will want you to combine chapters 4 and 5, so that you both present and interpret the meaning of the data at the same time. Check with your institution what their preference is.

Now that you’ve presented the data analysis results, its time to interpret and analyse them. In other words, its time to discuss what they mean, especially in relation to your research question(s).

What you discuss here will depend largely on your chosen methodology. For example, if you’ve gone the quantitative route, you might discuss the relationships between variables . If you’ve gone the qualitative route, you might discuss key themes and the meanings thereof. It all depends on what your research design choices were.

Most importantly, you need to discuss your results in relation to your research questions and aims, as well as the existing literature. What do the results tell you about your research questions? Are they aligned with the existing research or at odds? If so, why might this be? Dig deep into your findings and explain what the findings suggest, in plain English.

The final chapter – you’ve made it! Now that you’ve discussed your interpretation of the results, its time to bring it back to the beginning with the conclusion chapter . In other words, its time to (attempt to) answer your original research question s (from way back in chapter 1). Clearly state what your conclusions are in terms of your research questions. This might feel a bit repetitive, as you would have touched on this in the previous chapter, but its important to bring the discussion full circle and explicitly state your answer(s) to the research question(s).

Next, you’ll typically discuss the implications of your findings? In other words, you’ve answered your research questions – but what does this mean for the real world (or even for academia)? What should now be done differently, given the new insight you’ve generated?

Lastly, you should discuss the limitations of your research, as well as what this means for future research in the area. No study is perfect, especially not a Masters-level. Discuss the shortcomings of your research. Perhaps your methodology was limited, perhaps your sample size was small or not representative, etc, etc. Don’t be afraid to critique your work – the markers want to see that you can identify the limitations of your work. This is a strength, not a weakness. Be brutal!

This marks the end of your core chapters – woohoo! From here on out, it’s pretty smooth sailing.

The reference list is straightforward. It should contain a list of all resources cited in your dissertation, in the required format, e.g. APA , Harvard, etc.

It’s essential that you use reference management software for your dissertation. Do NOT try handle your referencing manually – its far too error prone. On a reference list of multiple pages, you’re going to make mistake. To this end, I suggest considering either Mendeley or Zotero. Both are free and provide a very straightforward interface to ensure that your referencing is 100% on point. I’ve included a simple how-to video for the Mendeley software (my personal favourite) below:

Some universities may ask you to include a bibliography, as opposed to a reference list. These two things are not the same . A bibliography is similar to a reference list, except that it also includes resources which informed your thinking but were not directly cited in your dissertation. So, double-check your brief and make sure you use the right one.

The very last piece of the puzzle is the appendix or set of appendices. This is where you’ll include any supporting data and evidence. Importantly, supporting is the keyword here.

Your appendices should provide additional “nice to know”, depth-adding information, which is not critical to the core analysis. Appendices should not be used as a way to cut down word count (see this post which covers how to reduce word count ). In other words, don’t place content that is critical to the core analysis here, just to save word count. You will not earn marks on any content in the appendices, so don’t try to play the system!

Time to recap…

And there you have it – the traditional dissertation structure and layout, from A-Z. To recap, the core structure for a dissertation or thesis is (typically) as follows:

• Acknowledgments page

Most importantly, the core chapters should reflect the research process (asking, investigating and answering your research question). Moreover, the research question(s) should form the golden thread throughout your dissertation structure. Everything should revolve around the research questions, and as you’ve seen, they should form both the start point (i.e. introduction chapter) and the endpoint (i.e. conclusion chapter).

I hope this post has provided you with clarity about the traditional dissertation/thesis structure and layout. If you have any questions or comments, please leave a comment below, or feel free to get in touch with us. Also, be sure to check out the rest of the  Grad Coach Blog .

Psst… there’s more (for free)

This post is part of our dissertation mini-course, which covers everything you need to get started with your dissertation, thesis or research project. 

You Might Also Like:

36 Comments

many thanks i found it very useful

Glad to hear that, Arun. Good luck writing your dissertation.

Such clear practical logical advice. I very much needed to read this to keep me focused in stead of fretting.. Perfect now ready to start my research!

what about scientific fields like computer or engineering thesis what is the difference in the structure? thank you very much

Thanks so much this helped me a lot!

Very helpful and accessible. What I like most is how practical the advice is along with helpful tools/ links.

Thanks Ade!

Thank you so much sir.. It was really helpful..

You’re welcome!

Hi! How many words maximum should contain the abstract?

Thank you so much 😊 Find this at the right moment

You’re most welcome. Good luck with your dissertation.

best ever benefit i got on right time thank you

Many times Clarity and vision of destination of dissertation is what makes the difference between good ,average and great researchers the same way a great automobile driver is fast with clarity of address and Clear weather conditions .

I guess Great researcher = great ideas + knowledge + great and fast data collection and modeling + great writing + high clarity on all these

You have given immense clarity from start to end.

Morning. Where will I write the definitions of what I’m referring to in my report?

Thank you so much Derek, I was almost lost! Thanks a tonnnn! Have a great day!

Thanks ! so concise and valuable

This was very helpful. Clear and concise. I know exactly what to do now.

Thank you for allowing me to go through briefly. I hope to find time to continue.

Really useful to me. Thanks a thousand times

Very interesting! It will definitely set me and many more for success. highly recommended.

Thank you soo much sir, for the opportunity to express my skills

Usefull, thanks a lot. Really clear

Very nice and easy to understand. Thank you .

That was incredibly useful. Thanks Grad Coach Crew!

My stress level just dropped at least 15 points after watching this. Just starting my thesis for my grad program and I feel a lot more capable now! Thanks for such a clear and helpful video, Emma and the GradCoach team!

Do we need to mention the number of words the dissertation contains in the main document?

It depends on your university’s requirements, so it would be best to check with them 🙂

Such a helpful post to help me get started with structuring my masters dissertation, thank you!

Great video; I appreciate that helpful information

It is so necessary or avital course

This blog is very informative for my research. Thank you

Doctoral students are required to fill out the National Research Council’s Survey of Earned Doctorates

wow this is an amazing gain in my life

This is so good

How can i arrange my specific objectives in my dissertation?

Trackbacks/Pingbacks

• What Is A Literature Review (In A Dissertation Or Thesis) - Grad Coach - […] is to write the actual literature review chapter (this is usually the second chapter in a typical dissertation or…

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• How it works

How to Structure a Dissertation – A Step by Step Guide

Published by Owen Ingram at August 11th, 2021 , Revised On September 20, 2023

A dissertation – sometimes called a thesis –  is a long piece of information backed up by extensive research. This one, huge piece of research is what matters the most when students – undergraduates and postgraduates – are in their final year of study.

On the other hand, some institutions, especially in the case of undergraduate students, may or may not require students to write a dissertation. Courses are offered instead. This generally depends on the requirements of that particular institution.

If you are unsure about how to structure your dissertation or thesis, this article will offer you some guidelines to work out what the most important segments of a dissertation paper are and how you should organise them. Why is structure so important in research, anyway?

One way to answer that, as Abbie Hoffman aptly put it, is because: “Structure is more important than content in the transmission of information.”

Also Read:   How to write a dissertation – step by step guide .

How to Structure a Dissertation or Thesis

It should be noted that the exact structure of your dissertation will depend on several factors, such as:

• Your research approach (qualitative/quantitative)
• The nature of your research design (exploratory/descriptive etc.)
• The requirements set for forth by your academic institution.
• The discipline or field your study belongs to. For instance, if you are a humanities student, you will need to develop your dissertation on the same pattern as any long essay .

This will include developing an overall argument to support the thesis statement and organizing chapters around theories or questions. The dissertation will be structured such that it starts with an introduction , develops on the main idea in its main body paragraphs and is then summarised in conclusion .

However, if you are basing your dissertation on primary or empirical research, you will be required to include each of the below components. In most cases of dissertation writing, each of these elements will have to be written as a separate chapter.

But depending on the word count you are provided with and academic subject, you may choose to combine some of these elements.

For example, sciences and engineering students often present results and discussions together in one chapter rather than two different chapters.

If you have any doubts about structuring your dissertation or thesis, it would be a good idea to consult with your academic supervisor and check your department’s requirements.

Parts of  a Dissertation or Thesis

Your dissertation will  start with a t itle page that will contain details of the author/researcher, research topic, degree program (the paper is to be submitted for), and research supervisor. In other words, a title page is the opening page containing all the names and title related to your research.

The name of your university, logo, student ID and submission date can also be presented on the title page. Many academic programs have stringent rules for formatting the dissertation title page.

Acknowledgements

The acknowledgments section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God, and participants of your study whose contribution and support enabled you to complete your work.

However, the acknowledgments section is usually optional.

Tip: Many students wrongly assume that they need to thank everyone…even those who had little to no contributions towards the dissertation. This is not the case. You only need to thank those who were directly involved in the research process, such as your participants/volunteers, supervisor(s) etc.

Perhaps the smallest yet important part of a thesis, an abstract contains 5 parts:

• A brief introduction of your research topic.
• The significance of your research.
•  A line or two about the methodology that was used.
• The results and what they mean (briefly); their interpretation(s).
• And lastly, a conclusive comment regarding the results’ interpretation(s) as conclusion .

Stuck on a difficult dissertation? We can help!

Our Essay Writing Service Features:

• Expert UK Writers
• Plagiarism-free
• Timely Delivery
• Thorough Research
• Rigorous Quality Control

“ Our expert dissertation writers can help you with all stages of the dissertation writing process including topic research and selection, dissertation plan, dissertation proposal , methodology , statistical analysis , primary and secondary research, findings and analysis and complete dissertation writing. “

Tip: Make sure to highlight key points to help readers figure out the scope and findings of your research study without having to read the entire dissertation. The abstract is your first chance to impress your readers. So, make sure to get it right. Here are detailed guidelines on how to write abstract for dissertation .

Table of Contents

Table of contents is the section of a dissertation that guides each section of the dissertation paper’s contents. Depending on the level of detail in a table of contents, the most useful headings are listed to provide the reader the page number on which said information may be found at.

Table of contents can be inserted automatically as well as manually using the Microsoft Word Table of Contents feature.

List of Figures and Tables

If your dissertation paper uses several illustrations, tables and figures, you might want to present them in a numbered list in a separate section . Again, this list of tables and figures can be auto-created and auto inserted using the Microsoft Word built-in feature.

List of Abbreviations

Dissertations that include several abbreviations can also have an independent and separate alphabetised  list of abbreviations so readers can easily figure out their meanings.

If you think you have used terms and phrases in your dissertation that readers might not be familiar with, you can create a  glossary  that lists important phrases and terms with their meanings explained.

Looking for dissertation help?

Researchprospect to the rescue then.

We have expert writers on our team who are skilled at helping students with quantitative dissertations across a variety of STEM disciplines. Guaranteeing 100% satisfaction!

Introduction

Introduction chapter  briefly introduces the purpose and relevance of your research topic.

Here, you will be expected to list the aim and key objectives of your research so your readers can easily understand what the following chapters of the dissertation will cover. A good dissertation introduction section incorporates the following information:

• It provides background information to give context to your research.
• It clearly specifies the research problem you wish to address with your research. When creating research questions , it is important to make sure your research’s focus and scope are neither too broad nor too narrow.
• it demonstrates how your research is relevant and how it would contribute to the existing knowledge.
• It provides an overview of the structure of your dissertation. The last section of an introduction contains an outline of the following chapters. It could start off with something like: “In the following chapter, past literature has been reviewed and critiqued. The proceeding section lays down major research findings…”
• Theoretical framework – under a separate sub-heading – is also provided within the introductory chapter. Theoretical framework deals with the basic, underlying theory or theories that the research revolves around.

All the information presented under this section should be relevant, clear, and engaging. The readers should be able to figure out the what, why, when, and how of your study once they have read the introduction. Here are comprehensive guidelines on how to structure the introduction to the dissertation .

“Overwhelmed by tight deadlines and tons of assignments to write? There is no need to panic! Our expert academics can help you with every aspect of your dissertation – from topic creation and research problem identification to choosing the methodological approach and data analysis.”

Literature Review 

The  literature review chapter  presents previous research performed on the topic and improves your understanding of the existing literature on your chosen topic. This is usually organised to complement your  primary research  work completed at a later stage.

Make sure that your chosen academic sources are authentic and up-to-date. The literature review chapter must be comprehensive and address the aims and objectives as defined in the introduction chapter. Here is what your literature research chapter should aim to achieve:

• Data collection from authentic and relevant academic sources such as books, journal articles and research papers.
• Analytical assessment of the information collected from those sources; this would involve a critiquing the reviewed researches that is, what their strengths/weaknesses are, why the research method they employed is better than others, importance of their findings, etc.
• Identifying key research gaps, conflicts, patterns, and theories to get your point across to the reader effectively.

While your literature review should summarise previous literature, it is equally important to make sure that you develop a comprehensible argument or structure to justify your research topic. It would help if you considered keeping the following questions in mind when writing the literature review:

• How does your research work fill a certain gap in exiting literature?
• Did you adopt/adapt a new research approach to investigate the topic?
• Does your research solve an unresolved problem?
• Is your research dealing with some groundbreaking topic or theory that others might have overlooked?
• Is your research taking forward an existing theoretical discussion?
• Does your research strengthen and build on current knowledge within your area of study? This is otherwise known as ‘adding to the existing body of knowledge’ in academic circles.

Tip: You might want to establish relationships between variables/concepts to provide descriptive answers to some or all of your research questions. For instance, in case of quantitative research, you might hypothesise that variable A is positively co-related to variable B that is, one increases and so does the other one.

Research Methodology

The methods and techniques ( secondary and/or primar y) employed to collect research data are discussed in detail in the  Methodology chapter. The most commonly used primary data collection methods are:

• questionnaires
• focus groups
• observations

Essentially, the methodology chapter allows the researcher to explain how he/she achieved the findings, why they are reliable and how they helped him/her test the research hypotheses or address the research problem.

You might want to consider the following when writing methodology for the dissertation:

• Type of research and approach your work is based on. Some of the most widely used types of research include experimental, quantitative and qualitative methodologies.
• Data collection techniques that were employed such as questionnaires, surveys, focus groups, observations etc.
• Details of how, when, where, and what of the research that was conducted.
• Data analysis strategies employed (for instance, regression analysis).
• Software and tools used for data analysis (Excel, STATA, SPSS, lab equipment, etc.).
• Research limitations to highlight any hurdles you had to overcome when carrying our research. Limitations might or might not be mentioned within research methodology. Some institutions’ guidelines dictate they be mentioned under a separate section alongside recommendations.
• Justification of your selection of research approach and research methodology.

Here is a comprehensive article on  how to structure a dissertation methodology .

Research Findings

In this section, you present your research findings. The dissertation findings chapter  is built around the research questions, as outlined in the introduction chapter. Report findings that are directly relevant to your research questions.

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the  Appendices .

As indicated above, you can either develop a  standalone chapter  to present your findings or combine them with the discussion chapter. This choice depends on  the type of research involved and the academic subject, as well as what your institution’s academic guidelines dictate.

For example, it is common to have both findings and discussion grouped under the same section, particularly if the dissertation is based on qualitative research data.

On the other hand, dissertations that use quantitative or experimental data should present findings and analysis/discussion in two separate chapters. Here are some sample dissertations to help you figure out the best structure for your own project.

Sample Dissertation

Tip: Try to present as many charts, graphs, illustrations and tables in the findings chapter to improve your data presentation. Provide their qualitative interpretations alongside, too. Refrain from explaining the information that is already evident from figures and tables.

The findings are followed by the  Discussion chapter , which is considered the heart of any dissertation paper. The discussion section is an opportunity for you to tie the knots together to address the research questions and present arguments, models and key themes.

This chapter can make or break your research.

The discussion chapter does not require any new data or information because it is more about the interpretation(s) of the data you have already collected and presented. Here are some questions for you to think over when writing the discussion chapter:

• Did your work answer all the research questions or tested the hypothesis?
• Did you come up with some unexpected results for which you have to provide an additional explanation or justification?
• Are there any limitations that could have influenced your research findings?

Here is an article on how to  structure a dissertation discussion .

Conclusions corresponding to each research objective are provided in the  Conclusion section . This is usually done by revisiting the research questions to finally close the dissertation. Some institutions may specifically ask for recommendations to evaluate your critical thinking.

By the end, the readers should have a clear apprehension of your fundamental case with a focus on  what methods of research were employed  and what you achieved from this research.

Quick Question: Does the conclusion chapter reflect on the contributions your research work will make to existing knowledge?

Answer: Yes, the conclusion chapter of the research paper typically includes a reflection on the research’s contributions to existing knowledge.  In the “conclusion chapter”, you have to summarise the key findings and discuss how they add value to the existing literature on the current topic.

Reference list

All academic sources that you collected information from should be cited in-text and also presented in a  reference list (or a bibliography in case you include references that you read for the research but didn’t end up citing in the text), so the readers can easily locate the source of information when/if needed.

At most UK universities, Harvard referencing is the recommended style of referencing. It has strict and specific requirements on how to format a reference resource. Other common styles of referencing include MLA, APA, Footnotes, etc.

Each chapter of the dissertation should have relevant information. Any information that is not directly relevant to your research topic but your readers might be interested in (interview transcripts etc.) should be moved under the Appendices section .

Things like questionnaires, survey items or readings that were used in the study’s experiment are mostly included under appendices.

An Outline of Dissertation/Thesis Structure

How can We Help you with your Dissertation?

If you are still unsure about how to structure a dissertation or thesis, or simply lack the motivation to kick start your dissertation project, you might be interested in our dissertation services .

If you are still unsure about how to structure a dissertation or thesis, or lack the motivation to kick start your dissertation project, you might be interested in our dissertation services.

Whether you need help with individual chapters, proposals or the full dissertation paper, we have PhD-qualified writers who will write your paper to the highest academic standard. ResearchProspect is UK-based, and a UK-registered business, which means the UK consumer law protects all our clients.

All You Need to Know About Us Learn More About Our Dissertation Services

FAQs About Structure a Dissertation

What does the title page of a dissertation contain.

The title page will contain details of the author/researcher, research topic , degree program (the paper is to be submitted for) and research supervisor’s name(s). The name of your university, logo, student number and submission date can also be presented on the title page.

What is the purpose of adding acknowledgement?

The acknowledgements section allows you to thank those who helped you with your dissertation project. You might want to mention the names of your academic supervisor, family members, friends, God and participants of your study whose contribution and support enabled you to complete your work.

Can I omit the glossary from the dissertation?

Yes, but only if you think that your paper does not contain any terms or phrases that the reader might not understand. If you think you have used them in the paper,  you must create a glossary that lists important phrases and terms with their meanings explained.

What is the purpose of appendices in a dissertation?

Any information that is not directly relevant to research questions or hypotheses but could be useful for the readers can be placed under the Appendices, such as questionnaire that was used in the study.

Which referencing style should I use in my dissertation?

You can use any of the referencing styles such as APA, MLA, and Harvard, according to the recommendation of your university; however, almost all UK institutions prefer Harvard referencing style .

What is the difference between references and bibliography?

References contain all the works that you read up and used and therefore, cited within the text of your thesis. However, in case you read on some works and resources that you didn’t end up citing in-text, they will be referenced in what is called a bibliography.

Additional readings might also be present alongside each bibliography entry for readers.

You May Also Like

Anyone who supports you in your research should be acknowledged in dissertation acknowledgments. Learn more on how to write dissertation acknowledgements.

Make sure that your selected topic is intriguing, manageable, and relevant. Here are some guidelines to help understand how to find a good dissertation topic.

Wish that you had more time to write your dissertation paper? Here are some practical tips for you to learn “How to get dissertation deadline extension”.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Schools & departments

Dissertations and research projects

General advice and resources to support you throughout your research-based dissertation or project.

This is a general resource to help you with the basics of organising and writing a research-based dissertation or project.  The Go further section at the end includes advice on work-based dissertations and signposts other resources.

You should consult your course or programme information, including online sources, and project supervisor or programme director for subject-specific guidance.

Dissertations and research projects are an opportunity to focus on particular question, and plan and undertake your own research to explore it further.  Many students really enjoy being an independent researcher and becoming the expert on their work.  The format varies depending on the disciplinary context, subject area, your research questions and the project.  You may be reviewing the literature, analysing a novel, developing and testing a new method or doing a work-based project.  However there are some common factors:

• They are an independent piece of work.  You will be working under supervision to some extent and may be collaborating with others, but ultimately you are submitting a piece of independent thought and writing.
• They tend to have a large word count.  This is to allow you to do sufficient in-depth analysis and discussion of the topic.
• They require a large investment of time, thought and energy throughout the process.  As a significant body of academic work, you need to maintain effort whilst reading, researching, thinking, writing and redrafting it.

Choosing your dissertation or project

Whether you are choosing your dissertation from a selection of topics or you are proposing your own, there are a range of factors to consider.  For example:

• What is the starting point for your work, i.e. previous or related research?
• How feasible is your project / proposal?
• Do you have enough time and resources to complete it?
• Will it be of an appropriate academic level?

A key questions to ask is “How interested am I in this topic?”  You will be working on your dissertation or project for some time, so having a genuine interest in the topic will help to keep you motivated.  If you have any questions specific to your topic or project, you should ask your supervisor, programme director or another member of staff who teaches you.

Planning your dissertation or research project

A research-based dissertation or project is a large piece of work requiring a high level of critical analysis.  To achieve this you will have to allow time, not just for the researching phase, but also for the writing and editing stages.  You will need to give yourself plenty of time to:

• Read around your topic and undertake background research;
• Digest and think about what you are learning and writing;
• Complete experiments, fieldwork, interviews or project placements;
• Analyse data, findings or results, and interpret them;
• Think about and decide on your conclusions.

Taking a project management approach to your dissertation or research project might be a more effective way to successfully complete it.  The Time management page has tips and tools for organising your time.

Time management webpage and tools

The dissertation and project planner can be used to think about the different stages and help give you an overall view of the process.  There are some general points and questions to act as prompts, spaces you can add your own notes in and some useful tips and resources.

Dissertation and project planner (pdf)                     Dissertation and project planner (rtf)

Writing your dissertation

You should not underestimate the time that should be allocated to writing your dissertation.  Writing will involve planning, background research, drafting, redrafting, and proof-reading and editing.

First draft : Your first draft is about getting words on the page.  For example, it may sketch out your first thoughts, arguments and potential structure.  You can review these and use them to check: are you focussed on the right topics and questions?  Is your structure and line of thought sensible?  This is also a good time to set up your format requirements (e.g. page layouts, references).

Redrafts : Redrafting is where you expand and refine your ideas and argument.  You may also find that as you are writing the direction of your argument changes; for example this could be due to your literature research producing new avenues of thought or your experiments turning up unexpected results.  This is a good time to review the focus of your initial question, and whether your arguments or conclusions are still sensible.

Final draft(s) : Your final draft(s) is where you cast a critical eye over your work and assess how effective it is in communicating your argument and conclusions - does it answer the question?  You should also check that your presentation, spelling and grammar are appropriate and polished, all your references are included, and your are following the appropriate format guidance.

It is a good idea to take a break between writing and reviewing your work.  Try to leave at least a day between writing before you pick it up again, the longer the better.  This allows you to look at your work with an analytical eye, looking for ways to improve.  Imagine you are reading your work as someone who is not so familiar with the topic: would a reader be able to follow and understand your argument?  Do your ideas link?  Have you signposted on from one section to the next?  Remember also to look back at your question/title, does your dissertation address it?  Does it follow a logical structure?

To check the flow of your argument or line of reasoning you can test pieces of your text using set criteria.  To help revise and restructure your text you can make a reverse outline.  Both of these techniques are available on our Editing and proofreading page.

Editing and proofreading

Producing a professional document

Information Services provide information and guidance about how to produce a thesis or dissertation using Microsoft Word.

Producing a thesis or dissertation using Microsoft Word (EASE log in required)

Thesis Hub: Producing your thesis or dissertation in Word

Choosing a reference manager

A referencing management tool can help you to collect and organise and your source material to produce a bibliography or reference list.

Referencing and reference management

Data Mindfulness

As part of your research you will produce and use research data in a variety of forms from quantitative and/or qualitative research.  This may be data you generate yourself or obtained from other researchers, data repositories or public records.  You need to make choices about what you use, handle your data correctly and document all of this process.

The University’s Research Data Service helps staff and students be effective with their research data before, during and after their project.   They have created an introductory handbook on Data Mindfulness for taught students writing a dissertation.  This handbook is accompanied by a set of short videos.  Together these cover topics including what data is, how to store it, file organisation and dealing with your data after your hand-in.  There is advice in the handbook on working with sensitive data and issues such as privacy, confidentiality and disclosure.

Data Mindfulness handbook

Data Mindfulness videos

Work-based dissertations

Many courses and programmes, particularly at Postgraduate level, offer the opportunity to carry out a work-based dissertation.  These opportunities vary between Schools and Programmes but will typically involve students tackling a research question identified by an organisation such as a business, a public sector organisation or a charity.  A work based dissertation project can be invaluable for your employability and for career development.

If you are interested in carrying out a work-based dissertation you may need to start planning earlier than you would for a more traditional academic dissertation.  If your Programme offers this opportunity, you will be given this information at the start of Semester 1.  If you would like to source and set up a dissertation project with an external organisation yourself, you will need to speak with your Programme Director or Course Organiser first.

You can draw on resources developed by the Making the Most of Masters project.

Making the Most of Masters

Work-based projects – advice for students

There are a variety of study guides available on dissertation and project writing.  Books aimed at postgraduate students can also be useful for undergraduates.  Our IAD Resource List has a selection available in University libraries.

Study Skills Guides

This article was published on 2024-02-26

• Postgraduate research
• Professional development

Dissertation Module: Work-Based Project (NRT079)

The aim of the work-based project is to implement and/or evaluate a practice initiative or change, drawing on health improvement literature.

The identified initiative or change has an impact on improving practice/practitioner development, while exploring your own role as a practitioner in effecting change.

In today’s health and social care settings, practitioners are not only engaged in the practice of their profession, but also in supporting the environment as an active learning arena, where students and professionals are expected to develop and maintain their competence in very complex situations.

The module aims to:

• enable you as a student to acquire the knowledge and value base which underpins the development, implementation and maintenance of health improvement skills within the work environment
• support you in the development of an understanding of work/practice place environments which facilitate reflection, innovation and ‘user focused’ practice
• provide you with the knowledge base and support to enable you to develop, implement and/or evaluate a project or initiative.

The WBP has really helped shape my current work and is pushing the service to strive for more resources to provide suitable MDT therapy for patients.

Module dates

Find out when this standalone module is running by downloading our Level 7 Standalone Modules Calendar:

Download the calendar

Module leader

Dr Anna Jones

Reader: Adult Nursing, Director of Learning and Teaching for Postgraduate Taught Studies and CPD

Further information

School of healthcare sciences.

We are dynamic, innovative and forward looking, and recognised for our excellence in learning, teaching and research.

• Email: [email protected]
• Phone: +44 (0)29 2251 0708

Our location

School of Healthcare Sciences, Cardiff University, Heath Park Campus, Cardiff, CF14 4XN

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Indian J Anaesth
• v.66(1); 2022 Jan

Dissertation writing in post graduate medical education

Department of Anaesthesiology, Dr. B R Ambedkar Medical College, Bengaluru, Karnataka, India

Mridul M Panditrao

1 Department of Anaesthesiology and Intensive Care, Adesh Institute of Medical Sciences and Research (AIMSR), Bathinda, Punjab, India

2 Department of Anaesthesiology, Kasturba Medical College, Mangalore, Manipal Academy of Higher Education, Manipal, India

Sukhminder Jit Singh Bajwa

3 Department of Anaesthesiology and Intensive Care, Gian Sagar Medical College and Hospital, Patiala, Punjab, India

Nishant Sahay

4 Department of Anaesthesiology, All India Institute of Medical Sciences, Patna, Bihar, India

Thrivikrama Padur Tantry

5 Department of Anaesthesiology, A J Institute of Medical Sciences and Research Centre, Kuntikana, Mangalore, Karnataka, India

Associated Data

A dissertation is a practical exercise that educates students about basics of research methodology, promotes scientific writing and encourages critical thinking. The National Medical Commission (India) regulations make assessment of a dissertation by a minimum of three examiners mandatory. The candidate can appear for the final examination only after acceptance of the dissertation. An important role in a dissertation is that of the guide who has to guide his protégés through the process. This manuscript aims to assist students and guides on the basics of conduct of a dissertation and writing the dissertation. For students who will ultimately become researchers, a dissertation serves as an early exercise. Even for people who may never do research after their degree, a dissertation will help them discern the merits of new treatment options available in literature for the benefit of their patients.

INTRODUCTION

The zenith of clinical residency is the completion of the Master's Dissertation, a document formulating the result of research conducted by the student under the guidance of a guide and presenting and publishing the research work. Writing a proper dissertation is most important to present the research findings in an acceptable format. It is also reviewed by the examiners to determine a part of the criteria for the candidate to pass the Masters’ Degree Examination.

The predominant role in a dissertation is that of the guide who has to mentor his protégés through the process by educating them on research methodology, by: (i) identifying a pertinent and topical research question, (ii) formulating the “type” of study and the study design, (iii) selecting the sample population, (iv) collecting and collating the research data accurately, (v) analysing the data, (vi) concluding the research by distilling the outcome, and last but not the least (vii) make the findings known by publication in an acceptable, peer-reviewed journal.[ 1 ] The co-guide could be a co-investigator from another department related to the study topic, and she/he will play an equivalent role in guiding the student.

Research is a creative and systematic work undertaken to increase the stock of knowledge.[ 2 ] This work, known as a study may be broadly classified into two groups in a clinical setting:

• Trials: Here the researcher intervenes to either prevent a disease or to treat it.
• Observational studies: Wherein the investigator makes no active intervention and merely observes the patients or subjects allocated the treatment based on clinical decisions.[ 3 ]

The research which is described in a dissertation needs to be presented under the following headings: Introduction, Aim of the Study, Description of devices if any or pharmacology of drugs, Review of Literature, Material and Methods, Observations and Results, Discussion, Conclusions, Limitations of the study, Bibliography, Proforma, Master chart. Some necessary certificates from the guide and the institute are a requirement in certain universities. The students often add an acknowledgement page before the details of their dissertation proper. It is their expression of gratitude to all of those who they feel have been directly or indirectly helpful in conduct of the study, data analysis, and finally construction of the dissertation.

Framing the research question (RQ)

It is the duty of the teacher to suggest suitable research topics to the residents, based on resources available, feasibility and ease of conduct at the centre. Using the FINER criteria, the acronym for feasibility, topical interest, novelty, ethicality and relevance would be an excellent way to create a correct RQ.[ 4 ]

The PICOT method which describes the patient, intervention, comparison, outcome and time, would help us narrow down to a specific and well-formulated RQ.[ 5 , 6 ] A good RQ leads to the derivation of a research hypothesis, which is an assumption or prediction of the outcome that will be tested by the research. The research topic could be chosen from among the routine clinical work regarding clinical management, use of drugs e.g., vasopressors to prevent hypotension or equipment such as high flow nasal oxygen to avoid ventilation.

Review of literature

To gather this information may be a difficult task for a fresh trainee however, a good review of the available literature is a tool to identify and narrow down a good RQ and generate a hypothesis. Literature sources could be primary (clinical trials, case reports), secondary (reviews, meta-analyses) or tertiary (e.g., reference books, compilations). Methods of searching literature could be manual (journals) or electronic (online databases), by looking up references or listed citations in existing articles. Electronic database searches are made through the various search engines available online e.g., scholar.google.com, National Library of Medicine (NLM) website, clinical key app and many more. Advanced searches options may help narrow down the search results to those that are relevant for the student. This could be based on synthesising keywords from the RQ, or by searching for phrases, Boolean operators, or utilising filters.

After choosing the topic, an apt and accurate title has to be chosen. This should be guided by the use of Medical Subject Headings (MeSH) terminology from the NLM, which is used for indexing, cataloguing, and searching of biomedical and health-related information.[ 7 ] The dissertation requires a detailed title which may include the objective of the study, key words and even the PICOT components. One may add the study design in the title e.g. “a randomised cross over study” or “an observational analytical study” etc.

Aim and the objectives

The Aims and the Objectives of the research study have to be listed clearly, before initiating the study.[ 8 ] “Gaps” or deficiencies in existing knowledge should be clearly cited. The Aim by definition is a statement of the expected outcome, while the Objectives (which might be further classed into primary and secondary based on importance) should be specific, measurable, achievable, realistic or relevant, time-bound and challenging; in short, “SMART!” To simplify, the aim is a statement of intent, in terms of what we hope to achieve at the end of the project. Objectives are specific, positive statements of measurable outcomes, and are a list of steps that will be taken to achieve the outcome.[ 9 ] Aim of a dissertation, for example, could be to know which of two nerve block techniques is better. To realise this aim, comparing the duration of postoperative analgesia after administration of the block by any measurable criteria, could be an objective, such as the time to use of first rescue analgesic drug. Similarly, total postoperative analgesic drug consumption may form a secondary outcome variable as it is also measurable. These will generate data that may be used for analysis to realise the main aim of the study.

Inclusion and exclusions

The important aspect to consider after detailing when and how the objectives will be measured is documenting the eligibility criteria for inclusion of participants. The exclusion criteria must be from among the included population/patients only. e.g., If only American Society of Anesthesiologists (ASA) I and II are included, then ASA III and IV cannot be considered as exclusion criteria, since they were never a part of the study. The protocol must also delineate the setting of the study, locations where data would be collected, and specify duration of conduct of the dissertation. A written informed consent after explaining the aim, objectives and methodology of the study is legally mandatory before embarking upon any human study. The study should explicitly clarify whether it is a retrospective or a prospective study, where the study is conducted and the duration of the study.

Sample size: The sample subjects in the study should be representative of the population upon whom the inference has to be drawn. Sampling is the process of selecting a group of representative people from a larger population and subjecting them for the research.[ 10 ] The sample size represents a number, beyond which the addition of population is unlikely to change the conclusion of the study. The sample size is calculated taking into consideration the primary outcome criteria, confidence interval (CI), power of the study, and the effect size the researcher wishes to observe in the primary objective of the study. Hence a typical sample size statement can be - “Assuming a duration of analgesia of 150 min and standard deviation (SD) of 15 min in first group, keeping power at 80% and CIs at 95% (alpha error at 0.05), a sample of 26 patients would be required to detect a minimum difference (effect size) of 30% in the duration of analgesia between the two groups. Information regarding the different sampling methods and sample size calculations may be found in the Supplementary file 1 .

Any one research question may be answered using a number of research designs.[ 11 ] Research designs are often described as either observational or experimental. The various research designs may be depicted graphically as shown in Figure 1 .

Graphical description of available research designs

The observational studies lack “the three cornerstones of experimentation” – controls, randomisation, and replication. In an experimental study on the other hand, in order to assess the effect of treatment intervention on a participant, it is important to compare it with subjects similar to each other but who have not been given the studied treatment. This group, also called the control group, may help distinguish the effect of the chosen intervention on outcomes from effects caused by other factors, such as the natural history of disease, placebo effects, or observer or patient expectations.

All the proposed dissertations must be submitted to the scientific committee for any suggestion regarding the correct methodology to be followed, before seeking ethical committee approval.

Ethical considerations

Ethical concerns are an important part of the research project, right from selection of the topic to the dissertation writing. It must be remembered, that the purpose of a dissertation given to a post-graduate student is to guide him/her through the process by educating them on the very basics of research methodology. It is therefore not imperative that the protégés undertake a complicated or risky project. If research involves human or animal subjects, drugs or procedures, research ethics guidelines as well as drug control approvals have to be obtained before tabling the proposal to the Institutional Ethics Committee (IEC). The roles, responsibilities and composition of the Ethics Committee has been specified by the Directorate General of Health Services, Government of India. Documented approval of the Ethics committee is mandatory before any subject can be enroled for any dissertation in India. Even retrospective studies require approval from the IEC. Details of this document is available at: https://cdsco.gov.in/opencms/resources/UploadCDSCOWeb/2018/UploadEthicsRegistration/Applmhrcrr.pdf .

The candidate and the guide are called to present their proposal before the committee. The ethical implications, risks and management, subjects’ rights and responsibilities, informed consent, monetary aspects, the research and analysis methods are all discussed. The patient safety is a topmost priority and any doubts of the ethical committee members should be explained in medically layman's terms. The dissertation topics should be listed as “Academic clinical trials” and must involve only those drugs which are already approved by the Drugs Controller General of India. More commonly, the Committee suggests rectifications, and then the researchers have to resubmit the modified proposal after incorporating the suggestions, at the next sitting of the committee or seek online approval, as required. At the conclusion of the research project, the ethics committee has to be updated with the findings and conclusions, as well as when it is submitted for publication. Any deviation from the approved timeline, as well as the research parameters has to be brought to the attention of the IEC immediately, and re-approval sought.

Clinical trial registration

Clinical Trial Registry of India (CTRI) is a free online searchable system for prospective registration of all clinical studies conducted in India. It is owned and managed by the National Institute of Medical Statistics, a division of Indian Council of Medical Research, Government of India. Registration of clinical trials will ensure transparency, accountability and accessibility of trials and their results to all potential beneficiaries.

After the dissertation proposal is passed by the scientific committee and IEC, it may be submitted for approval of trial registration to the CTRI. The student has to create a login at the CTRI website, and submit all the required data with the help of the guides. After submission, CTRI may ask for corrections, clarifications or changes. Subject enrolment and the actual trial should begin only after the CTRI approval.

Randomisation

In an experimental study design, the method of randomisation gives every subject an equal chance to get selected in any group by preventing bias. Primarily, three basic types employed in post-graduate medical dissertations are simple randomisation, block randomisation and stratified randomisation. Simple randomisation is based upon a single sequence of random assignments such as flipping a coin, rolling of dice (above 3 or below 3), shuffling of cards (odd or even) to allocate into two groups. Some students use a random number table found in books or use computer-generated random numbers. There are many random number generators, randomisation programs as well as randomisation services available online too. ( https://www-users.york.ac.uk/~mb55/guide/randsery.htm ).

There are many applications which generate random number sequences and a research student may use such computer-generated random numbers [ Figure 2 ]. Simple randomisation has higher chances of unequal distribution into the two groups, especially when sample sizes are low (<100) and thus block randomisation may be preferred. Details of how to do randomisation along with methods of allocation concealment may be found in Supplementary file 2 .

Figure depicting how to do block randomisation using online resources. (a) generation of a random list (b) transfer of the list to an MS excel file

Allocation concealment

If it is important in a study to generate a random sequence of intervention, it is also important for this sequence to be concealed from all stake-holders to prevent any scope of bias.[ 12 ] Allocation concealment refers to the technique used to implement a random sequence for allocation of intervention, and not to generate it.[ 13 ] In an Indian post-graduate dissertation, the sequentially numbered, opaque, sealed envelopes (SNOSE) technique is commonly used [ Supplementary file 2 ].

To minimise the chances of differential treatment allocation or assessments of outcomes, it is important to blind as many individuals as possible in the trial. Blinding is not an all-or-none phenomenon. Thus, it is very desirable to explicitly state in the dissertation, which individuals were blinded, how they achieved blinding and whether they tested the success of blinding.

Commonly used terms for blinding are

• Single blinding: Masks the participants from knowing which intervention has been given.
• Double blinding: Blinds both the participants as well as researchers to the treatment allocation.
• Triple blinding: By withholding allocation information from the subjects, researchers, as well as data analysts. The specific roles of researchers involved in randomisation, allocation concealment and blinding should be stated clearly in the dissertation.

Data which can be measured as numbers are called quantitative data [ Table 1 ]. Studies which emphasise objective measurements to generate numerical data and then apply statistical and mathematical analysis constitute quantitative research. Qualitative research on the other hand focuses on understanding people's beliefs, experiences, attitudes, behaviours and thus these generate non-numerical data called qualitative data, also known as categorical data, descriptive data or frequency counts. Importance of differentiating data into qualitative and quantitative lies in the fact that statistical analysis as well as the graphical representation may be very different.

Data collection types

In order to obtain data from the outcome variable for the purpose of analysis, we need to design a study which would give us the most valid information. A valid data or measurement tool, is the degree to which the tool measures what it claims to measure. For example, appearance of end tidal carbon dioxide waveform is a more valid measurement to assess correct endotracheal tube placement than auscultation of breath sounds on chest inflation.

The compilation of all data in a ‘Master Chart’ is a necessary step for planning, facilitating and appropriate preparation and processing of the data for analysis. It is a complete set of raw research data arranged in a systematic manner forming a well-structured and formatted, computable data matrix/database of the research to facilitate data analysis. The master chart is prepared as a Microsoft Excel sheet with the appropriate number of columns depicting the variable parameters for each individual subjects/respondents enlisted in the rows.

Statistical analysis

The detailed statistical methodology applied to analyse the data must be stated in the text under the subheading of statistical analysis in the Methods section. The statistician should be involved in the study during the initial planning stage itself. Following four steps have to be addressed while planning, performing and text writing of the statistical analysis part in this section.

Step 1. How many study groups are present? Whether analysis is for an unpaired or paired situation? Whether the recorded data contains repeated measurements? Unpaired or paired situations decide again on the choice of a test. The latter describes before and after situations for collected data (e.g. Heart rate data ‘before’ and ‘after’ spinal anaesthesia for a single group). Further, data should be checked to find out whether they are from repeated measurements (e.g., Mean blood pressure at 0, 1 st , 2 nd , 5 th , 10 th minutes and so on) for a group. Different types of data are commonly encountered in a dissertation [ Supplementary file 3A ].

Step 2. Does the data follow a normal distribution?[ 14 ]

Each study group as well as every parameter has to be checked for distribution analysis. This step will confirm whether the data of a particular group is normally distributed (parametric data) or does not follow the normal distribution (non-parametric data); subsequent statistical test selection mainly depends on the results of the distribution analysis. For example, one may choose the Student's’ test instead of the ‘Mann-Whitney U’ for non-parametric data, which may be incorrect. Each study group as well as every parameter has to be checked for distribution analysis [ Supplementary File 3B ].

Step 3. Calculation of measures of central tendency and measures of variability.

Measures of central tendency mainly include mean, median and mode whereas measures of variability include range, interquartile range (IQR), SD or variance not standard error of mean. Depending on Step 2 findings, one needs to make the appropriate choice. Mean and SD/variance are more often for normally distributed and median with IQR are the best measure for not normal (skewed) distribution. Proportions are used to describe the data whenever the sample size is ≥100. For a small sample size, especially when it is approximately 25-30, describe the data as 5/25 instead of 20%. Software used for statistical analysis automatically calculates the listed step 3 measures and thus makes the job easy.

Step 4. Which statistical test do I choose for necessary analysis?

Choosing a particular test [ Figure 3 ] is based on orderly placed questions which are addressed in the dissertation.[ 15 ]

Chosing a statistical test, (a). to find a difference between the groups of unpaired situations, (b). to find a difference between the groups of paired situations, (c). to find any association between the variables, (d). to find any agreement between the assessment techniques. ANOVA: Analysis of Variance. Reproduced with permission from Editor of Indian Journal of Ophthalmology, and the author, Dr Barun Nayak[ 15 ]

• Is there a difference between the groups of unpaired situations?
• Is there a difference between the groups of paired situations?
• Is there any association between the variables?
• Is there any agreement between the assessment techniques?

Perform necessary analysis using user-friendly software such as GraphPad Prism, Minitab or MedCalc,etc. Once the analysis is complete, appropriate writing in the text form is equally essential. Specific test names used to examine each part of the results have to be described. Simple listing of series of tests should not be done. A typical write-up can be seen in the subsequent sections of the supplementary files [Supplementary files 3C – E ]. One needs to state the level of significance and software details also.

Role of a statistician in dissertation and data analysis

Involving a statistician before planning a study design, prior to data collection, after data have been collected, and while data are analysed is desirable when conducting a dissertation. On the contrary, it is also true that self-learning of statistical analysis reduces the need for statisticians’ help and will improve the quality of research. A statistician is best compared to a mechanic of a car which we drive; he knows each element of the car, but it is we who have to drive it. Sometimes the statisticians may not be available for a student in an institute. Self-learning software tools, user-friendly statistical software for basic statistical analysis thus gain importance for students as well as guides. The statistician will design processes for data collection, gather numerical data, collect, analyse, and interpret data, identify the trends and relationships in data, perform statistical analysis and its interpretation, and finally assist in final conclusion writing.

Results are an important component of the dissertation and should follow clearly from the study objectives. Results (sometimes described as observations that are made by the researcher) should be presented after correct analysis of data, in an appropriate combination of text, charts, tables, graphs or diagrams. Decision has to be taken on each outcome; which outcome has to be presented in what format, at the beginning of writing itself. These should be statistically interpreted, but statistics should not surpass the dissertation results. The observations should always be described accurately and with factual or realistic values in results section, but should not be interpreted in the results section.

While writing, classification and reporting of the Results has to be done under five section paragraphs- population data, data distribution analysis, results of the primary outcome, results of secondary outcomes, any additional observations made such as a rare adverse event or a side effect (intended or unintended) or of any additional analysis that may have been done, such as subgroup analysis.

At each level, one may either encounter qualitative (n/N and %) or quantitative data (mean [SD], median [IQR] and so on.

In the first paragraph of Results while describing the population data, one has to write about included and excluded patients. One needs to cite the Consolidated Standards of Reporting Trials (CONSORT) flow chart to the text, at this stage. Subsequently, highlighting of age, sex, height, body mass index (BMI) and other study characteristics referring to the first table of ‘patients data’ should be considered. It is not desirable to detail all values and their comparison P values in the text again in population data as long as they are presented in a cited table. An example of this pattern can be seen in Supplementary file 3D .

In the second paragraph, one needs to explain how the data is distributed. It should be noted that, this is not a comparison between the study groups but represents data distribution for the individual study groups (Group A or Group B, separately)[ Supplementary file 3E ].

In the subsequent paragraph of Results , focused writing on results of the primary outcomes is very important. It should be attempted to mention most of the data outputs related to the primary outcomes as the study is concluded based on the results of this outcome analysis. The measures of central tendency and dispersion (Mean or median and SD or IQR etc., respectively), alongside the CIs, sample number and P values need to be mentioned. It should be noted that the CIs can be for the mean as well as for the mean difference and should not be interchanged. An example of this pattern can be seen in Supplementary file 3F .

A large number of the dissertations are guided for single primary outcome analysis, and also the results of multiple secondary outcomes are needed to be written. The primary outcome should be presented in detail, and secondary outcomes can be presented in tables or graphs only. This will help in avoiding a possible evaluator's fatigue. An example of this pattern can be seen in Supplementary file 3G .

In the last paragraph of the Results, mention any additional observations, such as a rare adverse event or side effect or describe the unexpected results. The results of any additional analysis (subgroup analysis) then need to be described too. An example of this pattern can be seen in Supplementary file 3H .

The most common error observed in the Results text is duplication of the data and analytical outputs. While using the text for summarising the results, at each level, it should not be forgotten to cite the table or graph but the information presented in a table should not be repeated in the text. Further, results should not be given to a greater degree of accuracy than that of the measurement. For example, mean (SD) age need to be presented as 34.5 (11.3) years instead of 34.5634 (11.349). The latter does not carry any additional information and is unnecessary. The actual P values need to be mentioned. The P value should not be simply stated as ‘ P < 0.05’; P value should be written with the actual numbers, such as ‘ P = 0.021’. The symbol ‘<’ should be used only when actual P value is <0.001 or <0.0001. One should try avoiding % calculations for a small sample especially when n < 100. The sample size calculation is a part of the methodology and should not be mentioned in the Results section.

The use of tables will help present actual data values especially when in large numbers. The data and their relationships can be easily understood by an appropriate table and one should avoid overwriting of results in the text format. All values of sample size, central tendency, dispersions, CIs and P value are to be presented in appropriate columns and rows. Preparing a dummy table for all outcomes on a rough paper before proceeding to Microsoft Excel may be contemplated. Appropriate title heading (e.g., Table 1 . Study Characteristics), Column Headings (e.g., Parameter studied, P values) should be presented. A footnote should be added whenever necessary. For outputs, where statistically significant P values are recorded, the same should be highlighted using an asterisk (*) symbol and the same *symbol should be cited in the footnote describing its value (e.g., * P < 0.001) which is self-explanatory for statistically significance. One should not use abbreviations such as ‘NS’ or ‘Sig’ for describing (non-) significance. Abbreviations should be described for all presented tables. A typical example of a table can be seen in Figure 4 .

Example of presenting a table

Graphical images

Similar to tables, the graphs and diagrams give a bird's-eye view of the entire data and therefore may easily be understood. bar diagrams (simple, multiple or component), pie charts, line diagrams, pictograms and spot maps suit qualitative data more whereas the histograms, frequency polygons, cumulative frequency, polygon scatter diagram, box and whisker plots and correlation diagrams are used to depict quantitative data. Too much presentation of graphs and images, selection of inappropriate or interchanging of graphs, unnecessary representation of three-dimensional graph for one-dimensional graphs, disproportionate sizes of length and width and incorrect scale and labelling of an axis should be avoided. All graphs should contain legends, abbreviation descriptions and a footnote. Appropriate labelling of the x - and the y -axis is also essential. Priori decided scale for axis data should be considered. The ‘error bar’ represents SDs or IQRs in the graphs and should be used irrespective of whether they are bar charts or line graphs. Not showing error bars in a graphical image is a gross mistake. An error bar can be shown on only one side of the line graph to keep it simple. A typical example of a graphical image can be seen in Figure 5 . The number of subjects (sample) is to be mentioned for each time point on the x -axis. An asterisk (*) needs to be put for data comparisons having statistically significant P value in the graph itself and they are self-explanatory with a ‘stand-alone’ graph.

Example of an incorrect (a) and correct (b) image

Once the results have been adequately analysed and described, the next step is to draw conclusions from the data and study. The main goal is to defend the work by staging a constructive debate with the literature.[ 16 ] Generally, the length of the ‘ Discussion ’ section should not exceed the sum of other sections (introduction, material and methods, and results).[ 17 ] Here the interpretation, importance/implications, relevance, limitations of the results are elaborated and should end in recommendations.

It is advisable to start by mentioning the RQ precisely, summarising the main findings without repeating the entire data or results again. The emphasis should be on how the results correlate with the RQ and the implications of these results, with the relevant review of literature (ROL). Do the results coincide with and add anything to the prevalent knowledge? If not, why not? It should justify the differences with plausible explanation. Ultimately it should be made clear, if the study has been successful in making some contribution to the existing evidence. The new results should not be introduced and any exaggerated deductions which cannot be corroborated by the outcomes should not be made.

The discussion should terminate with limitations of the study,[ 17 ] mentioned magnanimously. Indicating limitations of the study reflects objectivity of the authors. It should not enlist any errors, but should acknowledge the constraints and choices in designing, planning methodology or unanticipated challenges that may have cropped up during the actual conduct of the study. However, after listing the limitations, the validity of results pertaining to the RQ may be emphasised again.

This section should convey the precise and concise message as the take home message. The work carried out should be summarised and the answer found to the RQ should be succinctly highlighted. One should not start dwelling on the specific results but mention the overall gain or insights from the observations, especially, whether it fills the gap in the existing knowledge if any. The impact, it may have on the existing knowledge and practices needs to be reiterated.

What to do when we get a negative result?

Sometimes, despite the best research framework, the results obtained are inconclusive or may even challenge a few accepted assumptions.[ 18 ] These are frequently, but inappropriately, termed as negative results and the data as negative data. Students must believe that if the study design is robust and valid, if the confounders have been carefully neutralised and the outcome parameters measure what they are intended to, then no result is a negative result. In fact, such results force us to critically re-evaluate our current understanding of concepts and knowledge thereby helping in better decision making. Studies showing lack of prolongation of the apnoea desaturation safety periods at lower oxygen flows strengthened belief in the difficult airway guidelines which recommend nasal insufflations with at least 15 L/min oxygen.[ 19 , 20 , 21 ]

Publishing the dissertation work

There are many reporting guidelines based upon the design of research. These are a checklist, flow diagram, or structured text to guide authors in reporting a specific type of research, developed using explicit methodology. The CONSORT[ 22 ] and Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) initiatives,[ 23 ] both included in the Enhancing the Quality and Transparency of Health Research (EQUATOR) international network, have elaborated appropriate suggestions to improve the transparency, clarity and completeness of scientific literature [ Figure 6 ].

Equator publishing tree

All authors are advised to follow the CONSORT/STROBE checklist attached as Supplementary file 4 , when writing and reporting their dissertation.

For most dissertations in Anaesthesiology, the CONSORT, STROBE, Standards for Reporting Diagnostic accuracy studies (STARD) or REporting recommendations for tumour MARKer prognostic studies (REMARK) guidelines would suffice.

Abstract and Summary

These two are the essential sections of a dissertation.

It should be at the beginning of the manuscript, after the title page and acknowledgments, but before the table of contents. The preparation varies as per the University guidelines, but generally ranges between 150 to 300 words. Although it comes at the very beginning of the thesis, it is the last part one writes. It must not be a ‘copy-paste job’ from the main manuscript, but well thought out miniaturisation, giving the overview of the entire text. As a rule, there should be no citation of references here.

Logically, it would have four components starting with aims, methods, results, and conclusion. One should begin the abstract with the research question/objectives precisely, avoiding excessive background information. Adjectives like, evaluate, investigate, test, compare raise the curiosity quotient of the reader. This is followed by a brief methodology highlighting only the core steps used. There is no need of mentioning the challenges, corrections, or modifications, if any. Finally, important results, which may be restricted to fulfilment (or not), of the primary objective should be mentioned. Abstracts end with the main conclusion stating whether a specific answer to the RQ was found/not found. Then recommendations as a policy statement or utility may be made taking care that it is implementable.

Keywords may be included in the abstract, as per the recommendations of the concerned university. The keywords are primarily useful as markers for future searches. Lastly, the random reader using any search engine may use these, and the identifiability is increased.

The summary most often, is either the last part of the Discussion or commonly, associated with the conclusions (Summary and Conclusions). Repetition of introduction, whole methodology, and all the results should be avoided. Summary, if individually written, should not be more than 150 to 300 words. It highlights the research question, methods used to investigate it, the outcomes/fallouts of these, and then the conclusion part may start.

References/bibliography

Writing References serves mainly two purposes. It is the tacit acknowledgement of the fact that someone else's written words or their ideas or their intellectual property (IP) are used, in part or in toto , to avoid any blame of plagiarism. It is to emphasise the circumspective and thorough literature search that has been carried out in preparation of the work.

Vancouver style for referencing is commonly used in biomedical dissertation writing. A reference list contains details of the works cited in the text of the document. (e.g. book, journal article, pamphlet, government reports, conference material, internet site). These details must include sufficient details so that others may locate and access those references.[ 24 ]

How much older the references can be cited, depends upon the university protocol. Conventionally accepted rule is anywhere between 5-10 years. About 85% of references should be dispersed in this time range. Remaining 15%, which may include older ones if they deal with theories, historical aspects, and any other factual content. Rather than citing an entire book, it is prudent to concentrate on the chapter or subsection of the text. There are subjective variations between universities on this matter. But, by and large, these are quoted as and when deemed necessary and with correct citation.

Bibliography is a separate list from the reference list and should be arranged alphabetically by writing name of the ‘author or title’ (where no author name is given) in the Vancouver style.

There are different aspects of writing the references.[ 24 ]

Citing the reference in the form of a number in the text. The work of other authors referred in the manuscript should be given a unique number and quoted. This is done in the order of their appearance in the text in chronological order by using Arabic numerals. The multiple publications of same author shall be written individually. If a reference article has more than six authors, all six names should be written, followed by “ et al .” to be used in lieu of other author names. It is desirable to write the names of the journals in abbreviations as per the NLM catalogue. Examples of writing references from the various sources may be found in the Supplementary file 5 .

Both the guide and the student have to work closely while searching the topic initially and also while finalising the submission of the dissertation. But the role of the guide in perusing the document in detail, and guiding the candidate through the required corrections by periodic updates and discussions cannot be over-emphasised.

Assessment of dissertations

Rarely, examiners might reject a dissertation for failure to choose a contemporary topic, a poor review of literature, defective methodology, biased analysis or incorrect conclusions. If these cannot be corrected satisfactorily, it will then be back to the drawing board for the researchers, who would have to start from scratch to redesign the study, keeping the deficiencies in mind this time.

Before submission, dissertation has to be run through “plagiarism detector” software, such as Turnitin or Grammarly to ensure that plagiarism does not happen even unwittingly. Informal guidelines state that the percentage plagiarism picked up by these tools should be <10%.

No work of art is devoid of mistakes/errors. Logically, a dissertation, being no exception, may also have errors. Our aim, is to minimise them.

The dissertation is an integral part in the professional journey of any medical post-graduate student. It is also an important responsibility for a guide to educate his protégé, the basics of research methodology through the process. Searching for a gap in literature and identification of a pertinent research question is the initial step. Careful planning of the study design is a vitally important aspect. After the conduct of study, writing the dissertation is an art for which the student often needs guidance. A good dissertation is a good description of a meticulously conducted study under the different headings described, utilising the various reporting guidelines. By avoiding some common errors as discussed in this manuscript, a good dissertation can result in a very fruitful addition to medical literature.

Financial support and sponsorship

Conflicts of interest.

There are no conflicts of interest.

SUPPLEMENTARY FILES

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Thesis or Dissertation Introduction

Published on 9 September 2022 by Tegan George and Shona McCombes.

The introduction is the first section of your thesis or dissertation , appearing right after the table of contents . Your introduction draws your reader in, setting the stage for your research with a clear focus, purpose, and direction.

Your introduction should include:

• Your topic, in context: what does your reader need to know to understand your thesis dissertation?
• Your focus and scope: what specific aspect of the topic will you address?
• The relevance of your research: how does your work fit into existing studies on your topic?
• Your questions and objectives: what does your research aim to find out, and how?
• An overview of your structure: what does each section contribute to the overall aim?

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

How to start your introduction, topic and context, focus and scope, relevance and importance, questions and objectives, overview of the structure, thesis introduction example, introduction checklist, frequently asked questions about introductions.

Although your introduction kicks off your dissertation, it doesn’t have to be the first thing you write – in fact, it’s often one of the very last parts to be completed (just before your abstract ).

It’s a good idea to write a rough draft of your introduction as you begin your research, to help guide you. If you wrote a research proposal , consider using this as a template, as it contains many of the same elements. However, be sure to revise your introduction throughout the writing process, making sure it matches the content of your ensuing sections.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

Begin by introducing your research topic and giving any necessary background information. It’s important to contextualise your research and generate interest. Aim to show why your topic is timely or important. You may want to mention a relevant news item, academic debate, or practical problem.

After a brief introduction to your general area of interest, narrow your focus and define the scope of your research.

You can narrow this down in many ways, such as by:

• Geographical area
• Time period
• Demographics or communities
• Themes or aspects of the topic

It’s essential to share your motivation for doing this research, as well as how it relates to existing work on your topic. Further, you should also mention what new insights you expect it will contribute.

Start by giving a brief overview of the current state of research. You should definitely cite the most relevant literature, but remember that you will conduct a more in-depth survey of relevant sources in the literature review section, so there’s no need to go too in-depth in the introduction.

Depending on your field, the importance of your research might focus on its practical application (e.g., in policy or management) or on advancing scholarly understanding of the topic (e.g., by developing theories or adding new empirical data). In many cases, it will do both.

Ultimately, your introduction should explain how your thesis or dissertation:

• Helps solve a practical or theoretical problem
• Addresses a gap in the literature
• Builds on existing research
• Proposes a new understanding of your topic

Perhaps the most important part of your introduction is your questions and objectives, as it sets up the expectations for the rest of your thesis or dissertation. How you formulate your research questions and research objectives will depend on your discipline, topic, and focus, but you should always clearly state the central aim of your research.

If your research aims to test hypotheses , you can formulate them here. Your introduction is also a good place for a conceptual framework that suggests relationships between variables .

• Conduct surveys to collect data on students’ levels of knowledge, understanding, and positive/negative perceptions of government policy.
• Determine whether attitudes to climate policy are associated with variables such as age, gender, region, and social class.
• Conduct interviews to gain qualitative insights into students’ perspectives and actions in relation to climate policy.

To help guide your reader, end your introduction with an outline  of the structure of the thesis or dissertation to follow. Share a brief summary of each chapter, clearly showing how each contributes to your central aims. However, be careful to keep this overview concise: 1-2 sentences should be enough.

I. Introduction

Human language consists of a set of vowels and consonants which are combined to form words. During the speech production process, thoughts are converted into spoken utterances to convey a message. The appropriate words and their meanings are selected in the mental lexicon (Dell & Burger, 1997). This pre-verbal message is then grammatically coded, during which a syntactic representation of the utterance is built.

Speech, language, and voice disorders affect the vocal cords, nerves, muscles, and brain structures, which result in a distorted language reception or speech production (Sataloff & Hawkshaw, 2014). The symptoms vary from adding superfluous words and taking pauses to hoarseness of the voice, depending on the type of disorder (Dodd, 2005). However, distortions of the speech may also occur as a result of a disease that seems unrelated to speech, such as multiple sclerosis or chronic obstructive pulmonary disease.

This study aims to determine which acoustic parameters are suitable for the automatic detection of exacerbations in patients suffering from chronic obstructive pulmonary disease (COPD) by investigating which aspects of speech differ between COPD patients and healthy speakers and which aspects differ between COPD patients in exacerbation and stable COPD patients.

Checklist: Introduction

I have introduced my research topic in an engaging way.

I have provided necessary context to help the reader understand my topic.

I have clearly specified the focus of my research.

I have shown the relevance and importance of the dissertation topic .

I have clearly stated the problem or question that my research addresses.

I have outlined the specific objectives of the research .

I have provided an overview of the dissertation’s structure .

You've written a strong introduction for your thesis or dissertation. Use the other checklists to continue improving your dissertation.

The introduction of a research paper includes several key elements:

• A hook to catch the reader’s interest
• Relevant background on the topic
• Details of your research problem
• A thesis statement or research question
• Sometimes an outline of the paper

Don’t feel that you have to write the introduction first. The introduction is often one of the last parts of the research paper you’ll write, along with the conclusion.

This is because it can be easier to introduce your paper once you’ve already written the body ; you may not have the clearest idea of your arguments until you’ve written them, and things can change during the writing process .

Research objectives describe what you intend your research project to accomplish.

They summarise the approach and purpose of the project and help to focus your research.

Your objectives should appear in the introduction of your research paper , at the end of your problem statement .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. & McCombes, S. (2022, September 09). How to Write a Thesis or Dissertation Introduction. Scribbr. Retrieved 2 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/introduction/

Is this article helpful?

Tegan George

Other students also liked, what is a dissertation | 5 essential questions to get started, how to write an abstract | steps & examples, how to write a thesis or dissertation conclusion.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• What Is a Thesis? | Ultimate Guide & Examples

What Is a Thesis? | Ultimate Guide & Examples

Published on September 14, 2022 by Tegan George . Revised on November 21, 2023.

A thesis is a type of research paper based on your original research. It is usually submitted as the final step of a master’s program or a capstone to a bachelor’s degree.

Writing a thesis can be a daunting experience. Other than a dissertation , it is one of the longest pieces of writing students typically complete. It relies on your ability to conduct research from start to finish: choosing a relevant topic , crafting a proposal , designing your research , collecting data , developing a robust analysis, drawing strong conclusions , and writing concisely .

Thesis template

You can also download our full thesis template in the format of your choice below. Our template includes a ready-made table of contents , as well as guidance for what each chapter should include. It’s easy to make it your own, and can help you get started.

Download Word template Download Google Docs template

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

Thesis vs. thesis statement, how to structure a thesis, acknowledgements or preface, list of figures and tables, list of abbreviations, introduction, literature review, methodology, reference list, proofreading and editing, defending your thesis, other interesting articles, frequently asked questions about theses.

You may have heard the word thesis as a standalone term or as a component of academic writing called a thesis statement . Keep in mind that these are two very different things.

• A thesis statement is a very common component of an essay, particularly in the humanities. It usually comprises 1 or 2 sentences in the introduction of your essay , and should clearly and concisely summarize the central points of your academic essay .
• A thesis is a long-form piece of academic writing, often taking more than a full semester to complete. It is generally a degree requirement for Master’s programs, and is also sometimes required to complete a bachelor’s degree in liberal arts colleges.
• In the US, a dissertation is generally written as a final step toward obtaining a PhD.
• In other countries (particularly the UK), a dissertation is generally written at the bachelor’s or master’s level.

The only proofreading tool specialized in correcting academic writing - try for free!

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Try for free

The final structure of your thesis depends on a variety of components, such as:

• Your discipline
• Your theoretical approach

Humanities theses are often structured more like a longer-form essay . Just like in an essay, you build an argument to support a central thesis.

In both hard and social sciences, theses typically include an introduction , literature review , methodology section ,  results section , discussion section , and conclusion section . These are each presented in their own dedicated section or chapter. In some cases, you might want to add an appendix .

Thesis examples

We’ve compiled a short list of thesis examples to help you get started.

• Example thesis #1:   “Abolition, Africans, and Abstraction: the Influence of the ‘Noble Savage’ on British and French Antislavery Thought, 1787-1807” by Suchait Kahlon.
• Example thesis #2: “’A Starving Man Helping Another Starving Man’: UNRRA, India, and the Genesis of Global Relief, 1943-1947″ by Julian Saint Reiman.

The very first page of your thesis contains all necessary identifying information, including:

• Your full title
• Your full name
• Your department
• Your institution and degree program
• Your submission date.

Sometimes the title page also includes your student ID, the name of your supervisor, or the university’s logo. Check out your university’s guidelines if you’re not sure.

Read more about title pages

The acknowledgements section is usually optional. Its main point is to allow you to thank everyone who helped you in your thesis journey, such as supervisors, friends, or family. You can also choose to write a preface , but it’s typically one or the other, not both.

Read more about acknowledgements Read more about prefaces

Receive feedback on language, structure, and formatting

Professional editors proofread and edit your paper by focusing on:

• Academic style
• Vague sentences
• Style consistency

See an example

An abstract is a short summary of your thesis. Usually a maximum of 300 words long, it’s should include brief descriptions of your research objectives , methods, results, and conclusions. Though it may seem short, it introduces your work to your audience, serving as a first impression of your thesis.

Read more about abstracts

A table of contents lists all of your sections, plus their corresponding page numbers and subheadings if you have them. This helps your reader seamlessly navigate your document.

Your table of contents should include all the major parts of your thesis. In particular, don’t forget the the appendices. If you used heading styles, it’s easy to generate an automatic table Microsoft Word.

Read more about tables of contents

While not mandatory, if you used a lot of tables and/or figures, it’s nice to include a list of them to help guide your reader. It’s also easy to generate one of these in Word: just use the “Insert Caption” feature.

Read more about lists of figures and tables

If you have used a lot of industry- or field-specific abbreviations in your thesis, you should include them in an alphabetized list of abbreviations . This way, your readers can easily look up any meanings they aren’t familiar with.

Read more about lists of abbreviations

Relatedly, if you find yourself using a lot of very specialized or field-specific terms that may not be familiar to your reader, consider including a glossary . Alphabetize the terms you want to include with a brief definition.

Read more about glossaries

An introduction sets up the topic, purpose, and relevance of your thesis, as well as expectations for your reader. This should:

• Ground your research topic , sharing any background information your reader may need
• Define the scope of your work
• Introduce any existing research on your topic, situating your work within a broader problem or debate
• State your research question(s)
• Outline (briefly) how the remainder of your work will proceed

In other words, your introduction should clearly and concisely show your reader the “what, why, and how” of your research.

Read more about introductions

A literature review helps you gain a robust understanding of any extant academic work on your topic, encompassing:

• Selecting relevant sources
• Determining the credibility of your sources
• Critically evaluating each of your sources
• Drawing connections between sources, including any themes, patterns, conflicts, or gaps

A literature review is not merely a summary of existing work. Rather, your literature review should ultimately lead to a clear justification for your own research, perhaps via:

• Addressing a gap in the literature
• Building on existing knowledge to draw new conclusions
• Exploring a new theoretical or methodological approach
• Introducing a new solution to an unresolved problem
• Definitively advocating for one side of a theoretical debate

Read more about literature reviews

Theoretical framework

Your literature review can often form the basis for your theoretical framework, but these are not the same thing. A theoretical framework defines and analyzes the concepts and theories that your research hinges on.

Read more about theoretical frameworks

Your methodology chapter shows your reader how you conducted your research. It should be written clearly and methodically, easily allowing your reader to critically assess the credibility of your argument. Furthermore, your methods section should convince your reader that your method was the best way to answer your research question.

A methodology section should generally include:

• Your overall approach ( quantitative vs. qualitative )
• Your research methods (e.g., a longitudinal study )
• Your data collection methods (e.g., interviews or a controlled experiment
• Any tools or materials you used (e.g., computer software)
• The data analysis methods you chose (e.g., statistical analysis , discourse analysis )
• A strong, but not defensive justification of your methods

Read more about methodology sections

Your results section should highlight what your methodology discovered. These two sections work in tandem, but shouldn’t repeat each other. While your results section can include hypotheses or themes, don’t include any speculation or new arguments here.

Your results section should:

• State each (relevant) result with any (relevant) descriptive statistics (e.g., mean , standard deviation ) and inferential statistics (e.g., test statistics , p values )
• Explain how each result relates to the research question
• Determine whether the hypothesis was supported

Additional data (like raw numbers or interview transcripts ) can be included as an appendix . You can include tables and figures, but only if they help the reader better understand your results.

Read more about results sections

Your discussion section is where you can interpret your results in detail. Did they meet your expectations? How well do they fit within the framework that you built? You can refer back to any relevant source material to situate your results within your field, but leave most of that analysis in your literature review.

For any unexpected results, offer explanations or alternative interpretations of your data.

Read more about discussion sections

Your thesis conclusion should concisely answer your main research question. It should leave your reader with an ultra-clear understanding of your central argument, and emphasize what your research specifically has contributed to your field.

Why does your research matter? What recommendations for future research do you have? Lastly, wrap up your work with any concluding remarks.

Read more about conclusions

In order to avoid plagiarism , don’t forget to include a full reference list at the end of your thesis, citing the sources that you used. Choose one citation style and follow it consistently throughout your thesis, taking note of the formatting requirements of each style.

Which style you choose is often set by your department or your field, but common styles include MLA , Chicago , and APA.

Create APA citations Create MLA citations

In order to stay clear and concise, your thesis should include the most essential information needed to answer your research question. However, chances are you have many contributing documents, like interview transcripts or survey questions . These can be added as appendices , to save space in the main body.

Read more about appendices

Once you’re done writing, the next part of your editing process begins. Leave plenty of time for proofreading and editing prior to submission. Nothing looks worse than grammar mistakes or sloppy spelling errors!

Consider using a professional thesis editing service or grammar checker to make sure your final project is perfect.

Once you’ve submitted your final product, it’s common practice to have a thesis defense, an oral component of your finished work. This is scheduled by your advisor or committee, and usually entails a presentation and Q&A session.

After your defense , your committee will meet to determine if you deserve any departmental honors or accolades. However, keep in mind that defenses are usually just a formality. If there are any serious issues with your work, these should be resolved with your advisor way before a defense.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Survivorship bias
• Self-serving bias
• Availability heuristic
• Halo effect
• Hindsight bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

If you only used a few abbreviations in your thesis or dissertation , you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimizing confusion about abbreviations unfamiliar to your reader.

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

A thesis is typically written by students finishing up a bachelor’s or Master’s degree. Some educational institutions, particularly in the liberal arts, have mandatory theses, but they are often not mandatory to graduate from bachelor’s degrees. It is more common for a thesis to be a graduation requirement from a Master’s degree.

Even if not mandatory, you may want to consider writing a thesis if you:

• Plan to attend graduate school soon
• Have a particular topic you’d like to study more in-depth
• Are considering a career in research
• Would like a capstone experience to tie up your academic experience

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, November 21). What Is a Thesis? | Ultimate Guide & Examples. Scribbr. Retrieved April 2, 2024, from https://www.scribbr.com/dissertation/thesis/

Is this article helpful?

Tegan George

Other students also liked, dissertation & thesis outline | example & free templates, writing strong research questions | criteria & examples, 10 research question examples to guide your research project, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”