electronics engineering thesis example

• USF Research
• USF Libraries

Digital Commons @ USF > College of Engineering > Electrical Engineering > Theses and Dissertations

Electrical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

On the Performance Enhancement of Beamspace MIMO and Non-orthogonal Multiple Access for Future Cellular Networks , Sinasi Cetinkaya

Enhancing Smart Grid Security and Reliability through Graph Signal Processing and Energy Data Analytics , Md Abul Hasnat

Fabric-Based Organic Electrochemical Transistor Towards Wearable pH Sensing Electronics , Nestor Osvaldo Marquez Rios

Novel Systems Engineering Framework Analysis of Photovoltaic Models and Equations , Peter R. Michael

Deep Learning Enhancement and Privacy-Preserving Deep Learning: A Data-Centric Approach , Hung S. Nguyen

Cyber-Physical Multi-Robot Systems in a Smart Factory: A Networked AI Agents Approach , Zixiang Nie

Multiple Access Techniques Enabling Diverse Wireless Services , Mehmet Mert Şahin

Deep Reinforcement Learning Based Optimization Techniques for Energy and Socioeconomic Systems , Salman Sadiq Shuvo

Process Automation and Robotics Engineering for Industrial Processing Systems , Drake Stimpson

Theses/Dissertations from 2022 2022

Stability and Interaction Analysis of Inverter-Based Resources in Power Grids , Li Bao

Healthcare IoT System and Network Design , Halil Ibrahim Deniz

Video Anomaly Detection: Practical Challenges for Learning Algorithms , Keval Doshi

Data-Driven State Estimation for Improved Wide Area Situational Awareness in Smart Grids , Md Jakir Hossain

Deep Learning and Feature Engineering for Human Activity Recognition: Exploiting Novel Rich Learning Representations and Sub-transfer Learning to Boost Practical Performance , Ria Kanjilal

Assistive Technologies for Independent Navigation for People with Blindness , Howard Kaplan

Diagnosis of Neurodegenerative Diseases Using Higher Order Statistical Analysis of Electroencephalography Signals , Seyed Alireza Khoshnevis

Accelerating Multiparametric MRI for Adaptive Radiotherapy , Shraddha Pandey

A Model-Based Fault Diagnosis in Dynamic Systems via Asynchronous Motors System Identification or Testing, and Control Engineering Observers , Kenelt Pierre

Improving Wireless Networking from the Learning and Security Perspectives , Zhe Qu

Improving Robustness of Deep Learning Models and Privacy-Preserving Image Denoising , Hadi Zanddizari

Theses/Dissertations from 2021 2021

A Method for Compact Representation of Heterogenous and Multivariate Time Series for Robust Classification and Visualization , Alla Abdella

Dynamical System and Parameter Identification for Power Systems , Abdullah Abdulrahman Alassaf

Phasor Domain Modeling of Type-III Wind Turbines , Mohammed Alqahtani

An Automated Framework for Connected Speech Evaluation of Neurodegenerative Disease: A Case Study in Parkinson's Disease , Sai Bharadwaj Appakaya

Investigation of CoO ATO for Solar Cells and Infrared Sheaths , Manopriya Devisetty Subramanyam

Thermal Management of Lithium-ion Batteries Using Supercapacitors , Sanskruta Dhotre

Effect of Se Composition in CdSe 1-X T eX /CdTe Solar Cells , Sheikh Tawsif Elahi

Microencapsulation of Thermochromic Materials for Thermal Storage and Energy Efficiency of Buildings , Abdullatif Hakami

Piezoelectrically-Transduced ZnO-on-Diamond Resonators with Enhanced Signal-to-Noise Ratio and Power-handling Capability for Sensing and Wireless Communication Applications , Xu Han

Preparation and Characterization of Single Layer Conducting Polymer Electrochromic and Touchchromic Devices , Sharan Kumar Indrakar

Security Attacks and Defenses in Cyber Systems: From an AI Perspective , Zhengping Luo

Power System Optimization Methods: Convex Relaxation and Benders Decomposition , Minyue Ma

Metal Oxide Sensor Array Test Bed Prototype for Diagnostic Breath Analysis , Tiffany C. Miller

Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing , Ryan Murphy

Adaptive Network Slicing in Fog RAN for IoT with Heterogeneous Latency and Computing Requirements: A Deep Reinforcement Learning Approach , Almuthanna Nassar

Development of a Bipolar Radiofrequency Ablation Device for Renal Denervation , Noel Perez

Copper Electrodeposition Assisted by Hydrogen Evolution for Wearable Electronics: Interconnections and Fiber Metallization , Sabrina M. Rosa Ortiz

Theory and Application of Dielectric Rod Antennas and Arrays , Gabriel Saffold

Advanced Organic Polymers for the Nanoscale Fabrication of Fiber-based Electronics Using the Electrospinning Technique , William Serrano Garcia

Transparent Planar Micro-Electrode Array for In-Vitro Electric Field Mediated Gene Delivery , Raj Himatlal Shah

High Speed Switching for Plasma Based Electroporation , Shivangi Sharma

Development of Small-Scale Power Supplies for Wearable Medical Diagnostic Devices , Donny Stiner

Novel Approach to Integrate CAN Based Vehicle Sensors with GPS Using Adaptive Filters to Improve Localization Precision in Connected Vehicles from a Systems Engineering Perspective , Abhijit Vasili

Modeling, Control and Analysis of Inverter-Based Generators in the Power Grids , Yangkun Xu

Fiber-Based Supercapacitor for Wearable Electronics , Rohit Lallansingh Yadav

Modeling, Identification, and Stability Analysis of Inverter-Based Resources Integrated Systems , Miao Zhang

Data-Oriented Approaches towards Mobile, Network and Secure Systems , Shangqing Zhao

Strategies in Botnet Detection and Privacy Preserving Machine Learning , Di Zhuang

Theses/Dissertations from 2020 2020

Architecture design and optimization of Edge-enabled Smart Grids , Adetola B. Adeniran

Multimodal Data Fusion and Attack Detection in Recommender Systems , Mehmet Aktukmak

Artificial Intelligence Towards the Wireless Channel Modeling Communications in 5G , Saud Mobark Aldossari

Enhancement of 5G Network Performance Using Non-Orthogonal Multiple Access (NOMA) , Faeik Tayseer Al Rabee

Investigation of Machine Learning Algorithms for Intrusion Detection System in Cybersecurity , Mohmmed Alrowaily

Comprehensive Optimization Models for Voltage Regulation in PV-rich Multi-phase Distribution Systems , Ibrahim Alsaleh

Design and Implementation of Solid/Solid Phononic Crystal Structures in Lateral Extensional Thin-film Piezoelectric on Silicon Micromechanical Resonators , Abdulrahman Alsolami

Analysis of Computational Modeling Methods as Applied to Single-Crystal Organohalide Perovskites , Jon M. Bebeau

Development of a Monolithic Implantable Neural Interface from Cubic Silicon Carbide and Evaluation of Its MRI Compatibility , Mohammad Beygi

Performance Enhancement Techniques for Next-Generation Multi-Service Communication and Medical Cyber-Physical Systems , Ali Fatih Demir

Microfluidically Reconfigurable Millimeter-Wave Switches, Antenna Arrays and Filters with Fast-Actuation Using Movable Metallized Plates and Integrated Actuation , Enrique J. Gonzalez Carvajal

Multilayered Transmission Lines, Antennas and Phased Arrays with Structurally Integrated Control Electronics Using Additive Manufacturing , Merve Kacar

Cost Efficient Algorithms and Methods for Spectral Efficiency in Future Radio Access , Murat Karabacak

Design of DeLRo Autonomous Delivery Robot and AI Based Localization , Tolga Karakurt

Theory, Fabrication, and Characterization of Perovskite Phototransistor , Fatemeh Khorramshahi

Modeling and Control of Renewable Energy in Grids and Microgrids , Yin Li

Next-Generation Self-Organizing Communications Networks: Synergistic Application of Machine Learning and User-Centric Technologies , Chetana V. Murudkar

Reliability Analysis of Power Grids and its Interdependent Infrastructures: An Interaction Graph-based Approach , Upama Nakarmi

Algorithms Enabling Communications in the Presence of Adjacent Channel Interference , Berker Peköz

Electrospun Nanofibrous Membrane Based Glucose Sensor with Integration of Potentiostat Circuit , Kavyashree Puttananjegowda

Service Provisioning and Security Design in Software Defined Networks , Mohamed Rahouti

Reading and Programming Spintronic Devices for Biomimetic Applications and Fault-tolerant Memory Design , Kawsher Ahmed Roxy

Implementation of SR Flip-Flop Based PUF on FPGA for Hardware Security , Sai Praneeth Sagi

Trauma Detection Personal Locator Beacon System , Sakshi Sharma

Network Function Virtualization In Fog Networks , Nazli Siasi

Socially Aware Network User Mobility Analysis and Novel Approaches on Aerial Mobile Wireless Network Deployment , Ismail Uluturk

Spatial Stereo Sound Source Localization Optimization and CNN Based Source Feature Recognition , Cong Xu

Hybrid RF Acoustic Resonators and Arrays with Integrated Capacitive and Piezoelectric Transducers , Adnan Zaman

Theses/Dissertations from 2019 2019

Fabrication and Characterization of Electrical Energy Storage and Harvesting Energy Devices Using Gel Electrolytes , Belqasem Aljafari

Phasor Measurement Unit Data-Based Steady State and Dynamic Model Estimation , Anas Almunif

Cross Layer-based Intrusion Detection System Using Machine Learning for MANETs , Amar Amouri

Power Conditioning System on a Micro-Grid System , Tamoghna Banerjee

Thermal Response in a Field Oriented Controlled Three-phase Induction Motor , Niyem Mawenbe Bawana

Design and Development of a Wireless EEG System Integrated into a Football Helmet , Akshay V. Dunakhe

Machine Learning, Game Theory Algorithms, and Medium Access Protocols for 5G and Internet-of-Thing (IoT) Networks , Mohamed Elkourdi

Improving Stability by Enhancing Critical Fault Clearing Time , Ammara M. Ghani

RF Power Circuit Designs for Wi-Fi Applications , Krishna Manasa Gollapudi

Enhancing Secrecy and Capacity of Wireless Systems Using Directive Communications , Mohammed A. Hafez

Statistical Anomaly Detection and Mitigation of Cyber Attacks for Intelligent Transportation Systems , Ammar Haydari

Absorber and Window Study – CdSexTe1-x/CdTe Thin Film Solar Cells , Chih-An Hsu

Methods and Algorithms to Enhance the Security, Increase the Throughput, and Decrease the Synchronization Delay in 5G Networks , Asim Mazin

Piezoelectric ZnO Nanowires as a Tunable Interface Material for Opto-Electronic Applications , Anand Kumar Santhanakrishna

Security Framework for the Internet of Things Leveraging Network Telescopes and Machine Learning , Farooq Israr Ahmed Shaikh

Diversity and Network Coded 5G Wireless Network Infrastructure for Ultra-Reliable Communications , Nabeel Ibrahim Sulieman

The Design of Passive Networks with Full-Wave Component Models , Eric Valentino

CubeSat Constellation Design for Intersatellite Linking , Michael T. White

Theses/Dissertations from 2018 2018

Design of Micro-Scale Energy Harvesting Systems for Low Power Applications Using Enhanced Power Management System , Majdi M. Ababneh

A Study on the Adaptability of Immune System Principles to Wireless Sensor Network and IoT Security , Vishwa Alaparthy

Validation of Results of Smart Grid Protection through Self-Healing , Felipe Framil Assumpção

A Novel Framework to Determine Physiological Signals From Blood Flow Dynamics , Prashanth Chetlur Adithya

The Effect of Processing Conditions on the Energetic Diagram of CdTe Thin Films Studied by Photoluminescence , Shamara P. Collins

Physical Electronic Properties of Self-Assembled 2D and 3D Surface Mounted Metal-Organic Frameworks , Radwan Elzein

Advanced Search

• Email Notifications and RSS
• All Collections
• USF Faculty Publications
• Open Access Journals
• Conferences and Events
• Theses and Dissertations
• Textbooks Collection

Useful Links

• Rights Information
• SelectedWorks
• Submit Research

Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements

Privacy Copyright

ScholarWorks@UMass Amherst

Home > Engineering > ECE > Electrical & Computer Engineering Masters Theses Collection

Electrical & Computer Engineering Masters Theses Collection

Theses from 2024 2024.

Extracting DNN Architectures Via Runtime Profiling On Mobile GPUs , Dong Hyub Kim, Electrical & Computer Engineering

Semantic-Aware Blockchain Architecture Design for Lifelong Edge-enabled Metaverse , Ning Wang, Electrical & Computer Engineering

Blockchain Design for a Secure Pharmaceutical Supply Chain , Zhe Xu, Electrical & Computer Engineering

Collaborative Caching and Computation Offloading for Intelligent Transportation Systems enabled by Satellite-Airborne-Terrestrial Networks , Shulun Yang, Electrical & Computer Engineering

Protecting Return Address Integrity for RISC-V via Pointer Authentication , yuhe zhao, Electrical & Computer Engineering

Theses from 2023 2023

Fingerprinting for Chiplet Architectures Using Power Distribution Network Transients , Matthew G. Burke, Electrical & Computer Engineering

Design and Fabrication of a Trapped Ion Quantum Computing Testbed , Christopher A. Caron, Electrical & Computer Engineering

Analog Cancellation of a Known Remote Interference: Hardware Realization and Analysis , James M. Doty, Electrical & Computer Engineering

Electrothermal Properties of 2D Materials in Device Applications , Samantha L. Klein, Electrical & Computer Engineering

Ablation Study on Deeplabv3+ for Semantic Segmentation , Bowen Lei, Electrical & Computer Engineering

A Composability-Based Transformer Pruning Framework , Yuping Lin, Electrical & Computer Engineering

A Model Extraction Attack on Deep Neural Networks Running on GPUs , Jonah G. O'Brien Weiss, Electrical & Computer Engineering

Heterogeneous IoT Network Architecture Design for Age of Information Minimization , Xiaohao Xia, Electrical & Computer Engineering

Theses from 2022 2022

Theory and Analysis of Backprojection Processing for Interferometric SAR , Marc Closa Tarres, Electrical & Computer Engineering

Unpaired Skeleton-to-Photo Translation for Sketch-to-Photo Synthesis , Yuanzhe Gu, Electrical & Computer Engineering

Integration of Digital Signal Processing Block in SymbiFlow FPGA Toolchain for Artix-7 Devices , Andrew T. Hartnett, Electrical & Computer Engineering

Planar Ultra-Wideband Modular Antenna (PUMA) Arrays for High-Volume Manufacturing on Organic Laminates and BGA Interfaces , James R. LaCroix, Electrical & Computer Engineering

Planar Transmission-Line Metamaterials on an Irregular Grid , Tina E. Maurer, Electrical & Computer Engineering

Formally Verifiable Synthesis Flow In FPGAs , Anurag V. Muttur, Electrical & Computer Engineering

Theses from 2021 2021

Graph-Algorithm Based Verification on Network Configuration Robustness , Zibin Chen, Electrical & Computer Engineering

A Cloud Infrastructure for Large Scale Health Monitoring in Older Adult Care Facilities , Uchechukwu Gabriel David, Electrical & Computer Engineering

Internet Infrastructures for Large Scale Emulation with Efficient HW/SW Co-design , Aiden K. Gula, Electrical & Computer Engineering

Mtemp: An Ambient Temperature Estimation Method Using Acoustic Signal on Mobile Devices , Hao Guo, Electrical & Computer Engineering

BENCHMARKING SMALL-DATASET STRUCTURE-ACTIVITY-RELATIONSHIP MODELS FOR PREDICTION OF WNT SIGNALING INHIBITION , Mahtab Kokabi, Electrical & Computer Engineering

ACTION : Adaptive Cache Block Migration in Distributed Cache Architectures , Chandra Sekhar Mummidi, Electrical & Computer Engineering

Modeling and Characterization of Optical Metasurfaces , Mahsa Torfeh, Electrical & Computer Engineering

TickNet: A Lightweight Deep Classifier for Tick Recognition , Li Wang, Electrical & Computer Engineering

Lecture Video Transformation through An Intelligent Analysis and Post-processing System , Xi Wang, Electrical & Computer Engineering

Correcting For Terrain Interference, Attenuation, and System Bias for a Dual Polarimetric, X-Band Radar , Casey Wolsieffer, Electrical & Computer Engineering

Theses from 2020 2020

Numerical Simulation of Thermoelectric Transport in Bulk and Nanostructured SiSn Alloys , Venkatakrishna Dusetty, Electrical & Computer Engineering

Deep Reinforcement Learning For Distributed Fog Network Probing , Xiaoding Guan, Electrical & Computer Engineering

COMPRESSIVE PARAMETER ESTIMATION VIA APPROXIMATE MESSAGE PASSING , Shermin Hamzehei, Electrical & Computer Engineering

Metric Learning via Linear Embeddings for Human Motion Recognition , ByoungDoo Kong, Electrical & Computer Engineering

Compound Effects of Clock and Voltage Based Power Side-Channel Countermeasures , Jacqueline Lagasse, Electrical & Computer Engineering

Network Virtualization and Emulation using Docker, OpenvSwitch and Mininet-based Link Emulation , Narendra Prabhu, Electrical & Computer Engineering

Thermal Transport Modeling Of Semiconductor Materials From First Principles , Aliya Qureshi, Electrical & Computer Engineering

CROSSTALK BASED SIDE CHANNEL ATTACKS IN FPGAs , Chethan Ramesh, Electrical & Computer Engineering

Accelerating RSA Public Key Cryptography via Hardware Acceleration , Pavithra Ramesh, Electrical & Computer Engineering

Real-Time TDDFT-Based Filtered Spectroscopy , Ivan Williams, Electrical & Computer Engineering

Perception System: Object and Landmark Detection for Visually Impaired Users , Chenguang Zhang, Electrical & Computer Engineering

Theses from 2019 2019

An Empirical Analysis of Network Traffic: Device Profiling and Classification , Mythili Vishalini Anbazhagan, Electrical & Computer Engineering

Pre-Travel Training And Real-Time Guidance System For People With Disabilities In Indoor Environments , Binru Cao, Electrical & Computer Engineering

Energy Efficiency of Computation in All-spin Logic: Projections and Fundamental Limits , Zongya Chen, Electrical & Computer Engineering

Improving Resilience of Communication in Information Dissemination for Time-Critical Applications , Rajvardhan Somraj Deshmukh, Electrical & Computer Engineering

InSAR Simulations for SWOT and Dual Frequency Processing for Topographic Measurements , Gerard Masalias Huguet, Electrical & Computer Engineering

A Study on Controlling Power Supply Ramp-Up Time in SRAM PUFs , Harshavardhan Ramanna, Electrical & Computer Engineering

The UMass Experimental X-Band Radar (UMAXX): An Upgrade of the CASA MA-1 to Support Cross-Polarization Measurements , Jezabel Vilardell Sanchez, Electrical & Computer Engineering

A Video-Based System for Emergency Preparedness and Recovery , Juechen Yin, Electrical & Computer Engineering

Theses from 2018 2018

Phonon Transport at Boundaries and Interfaces in Two-Dimensional Materials , Cameron Foss, Electrical & Computer Engineering

SkinnySensor: Enabling Battery-Less Wearable Sensors Via Intrabody Power Transfer , Neev Kiran, Electrical & Computer Engineering

Immersive Pre-travel Training Application for Seniors and People with Disabilities , Yang Li, Electrical & Computer Engineering

Analog Computing using 1T1R Crossbar Arrays , Yunning Li, Electrical & Computer Engineering

On-Chip Communication and Security in FPGAs , Shivukumar Basanagouda Patil, Electrical & Computer Engineering

CROWDSOURCING BASED MICRO NAVIGATION SYSTEM FOR VISUALLY IMPAIRED , Quan Shi, Electrical & Computer Engineering

AN EVALUATION OF SDN AND NFV SUPPORT FOR PARALLEL, ALTERNATIVE PROTOCOL STACK OPERATIONS IN FUTURE INTERNETS , Bhushan Suresh, Electrical & Computer Engineering

Applications Of Physical Unclonable Functions on ASICS and FPGAs , Mohammad Usmani, Electrical & Computer Engineering

Improvements to the UMASS S-Band FM-CW Vertical Wind Profiling Radar: System Performance and Data Analysis. , Joseph Waldinger, Electrical & Computer Engineering

Theses from 2017 2017

AutoPlug: An Automated Metadata Service for Smart Outlets , Lurdh Pradeep Reddy Ambati, Electrical & Computer Engineering

SkyNet: Memristor-based 3D IC for Artificial Neural Networks , Sachin Bhat, Electrical & Computer Engineering

Navigation Instruction Validation Tool and Indoor Wayfinding Training System for People with Disabilities , Linlin Ding, Electrical & Computer Engineering

Energy Efficient Loop Unrolling for Low-Cost FPGAs , Naveen Kumar Dumpala, Electrical & Computer Engineering

Effective Denial of Service Attack on Congestion Aware Adaptive Network on Chip , Vijaya Deepak Kadirvel, Electrical & Computer Engineering

VIRTUALIZATION OF CLOSED-LOOP SENSOR NETWORKS , Priyanka Dattatri Kedalagudde, Electrical & Computer Engineering

The Impact of Quantum Size Effects on Thermoelectric Performance in Semiconductor Nanostructures , Adithya Kommini, Electrical & Computer Engineering

MAGNETO-ELECTRIC APPROXIMATE COMPUTATIONAL FRAMEWORK FOR BAYESIAN INFERENCE , Sourabh Kulkarni, Electrical & Computer Engineering

Time Domain SAR Processing with GPUs for Airborne Platforms , Dustin Lagoy, Electrical & Computer Engineering

Query on Knowledge Graphs with Hierarchical Relationships , Kaihua Liu, Electrical & Computer Engineering

HIGH PERFORMANCE SILVER DIFFUSIVE MEMRISTORS FOR FUTURE COMPUTING , Rivu Midya, Electrical & Computer Engineering

Achieving Perfect Location Privacy in Wireless Devices Using Anonymization , Zarrin Montazeri, Electrical & Computer Engineering

KaSI: a Ka-band and S-band Cross-track Interferometer , Gerard Ruiz Carregal, Electrical & Computer Engineering

Analyzing Spark Performance on Spot Instances , Jiannan Tian, Electrical & Computer Engineering

Indoor Navigation For The Blind And Visually Impaired: Validation And Training Methodology Using Virtual Reality , Sili Wang, Electrical & Computer Engineering

Efficient Scaling of a Web Proxy Cluster , Hao Zhang, Electrical & Computer Engineering

ORACLE GUIDED INCREMENTAL SAT SOLVING TO REVERSE ENGINEER CAMOUFLAGED CIRCUITS , Xiangyu Zhang, Electrical & Computer Engineering

Theses from 2016 2016

Seamless Application Delivery Using Software Defined Exchanges , Divyashri Bhat, Electrical & Computer Engineering

PROCESSOR TEMPERATURE AND RELIABILITY ESTIMATION USING ACTIVITY COUNTERS , Mayank Chhablani, Electrical & Computer Engineering

PARQ: A MEMORY-EFFICIENT APPROACH FOR QUERY-LEVEL PARALLELISM , Qianqian Gao, Electrical & Computer Engineering

Accelerated Iterative Algorithms with Asynchronous Accumulative Updates on a Heterogeneous Cluster , Sandesh Gubbi Virupaksha, Electrical & Computer Engineering

Improving Efficiency of Thermoelectric Devices Made of Si-Ge, Si-Sn, Ge-Sn, and Si-Ge-Sn Binary and Ternary Alloys , Seyedeh Nazanin Khatami, Electrical & Computer Engineering

6:1 PUMA Arrays: Designs and Finite Array Effects , Michael Lee, Electrical & Computer Engineering

Protecting Controllers against Denial-of-Service Attacks in Software-Defined Networks , Jingrui Li, Electrical & Computer Engineering

INFRASTRUCTURE-FREE SECURE PAIRING OF MOBILE DEVICES , Chunqiu Liu, Electrical & Computer Engineering

Extrinsic Effects on Heat and Electron Transport In Two-Dimensional Van-Der Waals Materials- A Boltzmann Transport Study , Arnab K. Majee, Electrical & Computer Engineering

SpotLight: An Information Service for the Cloud , Xue Ouyang, Electrical & Computer Engineering

Localization, Visualization And Evacuation Guidance System In Emergency Situations , Jingyan Tang, Electrical & Computer Engineering

Variation Aware Placement for Efficient Key Generation using Physically Unclonable Functions in Reconfigurable Systems , Shrikant S. Vyas, Electrical & Computer Engineering

EVALUATING FEATURES FOR BROAD SPECIES BASED CLASSIFICATION OF BIRD OBSERVATIONS USING DUAL-POLARIZED DOPPLER WEATHER RADAR , Sheila Werth, Electrical & Computer Engineering

Theses from 2015 2015

Quality Factor of Horizontal Wire Dipole Antennas near Planar Conductor or Dielectric Interface , Adebayo Gabriel Adeyemi, Electrical & Computer Engineering

Evaluation of Two-Dimensional Codes for Digital Information Security in Physical Documents , Shuai Chen, Electrical & Computer Engineering

Design and Implementation of a High Performance Network Processor with Dynamic Workload Management , Padmaja Duggisetty, Electrical & Computer Engineering

Wavelet-Based Non-Homogeneous Hidden Markov Chain Model For Hyperspectral Signature Classification , Siwei Feng, Electrical & Computer Engineering

DEVELOPMENT OF INFRARED AND TERAHERTZ BOLOMETERS BASED ON PALLADIUM AND CARBON NANOTUBES USING ROLL TO ROLL PROCESS , Amulya Gullapalli, Electrical & Computer Engineering

Development of Prototypes of a Portable Road Weather Information System , Meha Kainth, Electrical & Computer Engineering

ADACORE: Achieving Energy Efficiency via Adaptive Core Morphing at Runtime , Nithesh Kurella, Electrical & Computer Engineering

Architecting SkyBridge-CMOS , Mingyu Li, Electrical & Computer Engineering

Function Verification of Combinational Arithmetic Circuits , Duo Liu, Electrical & Computer Engineering

ENERGY EFFICIENCY EXPLORATION OF COARSE-GRAIN RECONFIGURABLE ARCHITECTURE WITH EMERGING NONVOLATILE MEMORY , Xiaobin Liu, Electrical & Computer Engineering

Development of a Layout-Level Hardware Obfuscation Tool to Counter Reverse Engineering , Shweta Malik, Electrical & Computer Engineering

Energy Agile Cluster Communication , Muhammad Zain Mustafa, Electrical & Computer Engineering

Architecting NP-Dynamic Skybridge , Jiajun Shi, Electrical & Computer Engineering

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Author Corner

• Login for Faculty Authors
• Faculty Author Gallery
• Expert Gallery
• University Libraries
• Electrical and Computer Engineering Website
• UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright

Home > USC Columbia > Engineering and Computing, College of > Electrical Engineering > Electrical Engineering Theses and Dissertations

Electrical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Analysis, Measurement, and Modeling of Millimeter Wave Channels for Aviation Applications , Zeenat Afroze

Physics-Based and Behavioral Models for Fuel Cells , Charles Chima Anyim

Novel Structures and Thin Film Techniques for Reconfigurable RF Technologies With Improved Signal Integrity , Jinqun Ge

Suitability of Quantized DEVS-LIM Methods for Simulation of Power Systems , Navid Gholizadeh

Quantized State Simulation of Electrical Power Systems , Joseph Micah Hood

Optimization of Ultrawide Bandgap Semiconductor Materials for Heterostructure Field Effect Transistors (HFETs) , Mohi Uddin Jewel

Deep Learning Based Fault Diagnosis and Prognosis for Bearing , Guangxing Niu

High-Performance Wide Bandgap Semiconductor Power Modules Enabled by Advanced Two-Phase Mini-Channel Cooling , Bo Tian

Magnetic Softness Tuned Superparamagnetic Nanoparticles for Highly Efficient Cancer Theranostics , Jie Wang

Theses/Dissertations from 2022 2022

MIMO Antenna Systems for Wireless Handheld Devices , Ahmed H. Abdelgawwad

Applications of Laser Liftoff Technique for Wide Bandgap Power and Flexible Electronics , Md Didarul Alam

Non-intrusive Microwave Surface Wave Technique For Cable Damage and Aging Detection , Ahmed Shah Arman

Pulse Width Modulation-Based Voltage Balancing and Circulating Current Control for Modular Multilevel Converters , Md Multan Biswas

Networked Digital Predictive Control for Modular DC-DC Converters , Castulo Aaron De la O Pérez

Development of Micro-Sized Algan Deep Ultraviolet Light Emitting Diodes and Monolithic Photonic Integrated Circuits , Richard Speight Floyd III

Distributed Interdigital Capacitor (IDC) Sensing for Cable Insulation Aging and Degradation Detection , Md Nazmul Al Imran

Epitaxial 4H-SiC Radiation Detectors for Harsh Environment Applications , Joshua W. Kleppinger

Growth, Characterization and Evaluation of CdZnTeSe Single Crystals for Room Temperature Radiation Detectors , Ritwik Nag

Automated Contingency Management for Water Recycling System , Shijie Tang

Closed Form Implicitly Integrated Models for Computationally Efficient Simulation of Power Electronics , Andrew Wunderlich

Theses/Dissertations from 2021 2021

Real Time Simulation and Hardware in the Loop Methods for Power Electronics Power Distribution Systems , Michele Difronzo

Time-Domain Measurement of Magnetization Dynamics in Ferrofluids , Brian Egenriether

Increased Detectivity and Low Temperature Performance Analysis of Sub-20μm Micropixel Array A1GaN UV Photodiodes , Samia Islam

Operating Strategies and Disturbance Characterization for DC Microgrids , Miles Leonard-Albert

Real-Time Probabilistic Solvers for Digital Twins of Power Electronic Systems , Matthew Aaron Milton

Ultrawide Bandgap Algan-Channel Metal Oxide Semiconductor Heterostructure Field Effect Transistors With High- K Gate Dielectrics , Md Abu Shahab Mollah

Temperature Dependence of Electroluminescence and Current-Voltage Characteristics of Arrays of Deep Ultraviolet Algan Micropixel Led , Dhruvinkumar Prakashchandra Patel

Robust Adaptive Model Predictive Control of Nonlinear Sample-Data Systems , Lixing Yang

Theses/Dissertations from 2020 2020

Methods for Dynamic Stabilization, Performance Improvement, and Load Power Sharing In DC Power Distribution Systems , Hessamaldin Abdollahi

Data-Driven Modeling Through Power Hardware in the Loop Experiments: A PV Micro-Inverter Example , Hayder Dawood Abbood Almukhtar

Novel Multi-User Chirp Signaling Schemes for Future Aviation Communication Applications , Nozhan Hosseini

The Hybridization of a Graphene and Silicon Carbide Schottky Optoelectronic Device by the Incorporation of a Lead Sulfide Quantum Dot Film , Joshua Letton

Channel Modeling and Tropospheric Effects on Millimeter Wave Communications for Aviation Applications , Jinwen Liu

30 GHz Path Loss Modeling and Performance Evaluation for Noncoherent M-ary Frequency Shift Keying in the 30 GHz Band , Mohanad Razak Mohsen

Room Temperature Semiconductor Radiation Detectors Based on CdZnTe and CdZnTeSe , Mohsin Sajjad

Optimization of Vehicle to Grid System in a Power System With Unit Commitment , Charles Uko

Design of High Efficiency Wireless Power Thansfer System With Nonlinear Resonator , Yibing Zhang

Theses/Dissertations from 2019 2019

DC Bus Stabilization and Dynamic Performance Improvement of a Multi-Converter System , Silvia Arrua

Fabrication and Characterization of Thin Films for Heterojunction Solar Cells and Radiation Detectors , Towhid A. Chowdhury

Low Frequency Injection as a Method of Low-Level DC Microgrid Communication , Matthew Davidson

Modeling and Loss Analysis of SiC Power Semiconductor Devices for Switching Converter Applications , Soheila Eskandari

Path Loss Models for Two Small Airport Indoor Environments at 31 GHz , Alexander L. Grant

Wireless RF Induced Energy Absorption and Heating of Lanthanum-Nickel Alloy in the Near-Field , Michael Dillon Lindsay

Fractional Order and Virtual Variable Sampling Design of Repetitive Control for Power Converters , Zhichao Liu

Curbside Antenna to Vehicle Path Loss Measurements and Modeling in Three Frequency Bands , Patrick Murphy

Finite Element Electromagnetic (EM) Analyses of Induction Heating of Thermoplastic Composites , Ankit Patel

Constrained Consensus in Continuous-Time Multi-Agent Systems , Zheqing Zhou

Theses/Dissertations from 2018 2018

Study Of 4H-SiC And ALxGA1-xN Based Heterojunction Devices For Ultraviolet Detection Applications , Venkata Surya Naga Raju Chava

Photovoltaic Inverter Control to Sustain High Quality of Service , Yan Chen

Novel Wideband EBG Structures For Isolation Improvement Between Cosite Antennas , Paul John Czeresko III

High Resolution Radiation Detectors Based On 4H-SiC N-Type Epitaxial Layers And Pixilated CdZnTe Single Crystal Devices , Cihan Oner

Ku-Band AG Channel Modeling , Albert Smith

Quantifying Time Retarded Electromagnetic Fields and Their Applications in Transmission Lines , Brandon Thomas Gore

Structurally Integrated Reconfigurable Wideband Array For Conformal Applications , Michael Damon Wright

Multifunction Radio Frequency Composite Structures , David L. Zeppettella

Theses/Dissertations from 2017 2017

Dynamic Model and Control of Quadrotor in the Presence of Uncertainties , Courage Agho

Ultra High-Speed Signaling and Return on Technology Investment (ROTI) for the Electrical Interconnects Sector , Azniza Abd Aziz

High Quality Low Offcut 4h-Sic Epitaxy and Integrated Growth of Epitaxial Graphene for Hybrid Graphene/Sic Devices , Anusha Balachandran

Cable Health Monitoring System Built Into Power Converter Using Time Domain Reflectometry , Hossein Baninajar

Low Bandwidth Communication for Networked Power Hardware-In-The-Loop Simulation , Sean Borgsteede

Fault Protection In DC Microgrids Based On Autonomous Operation Of All Components , Qiu Deng

Distributed Optimization Method for Intelligent Control of DC Microgrids , Yuanyuan Fan

Three Segment Adaptive Power Electronic Compensator for Non-periodic Currents , Amin Ghaderi

Study of Mos2 and Graphene-Based Heterojunctions for Electronic and Sensing Applications , Ifat Jahangir

Evaluation Of Multicarrier Air Interfaces In The Presence Of Interference For L-Band And C-Band Air-Ground Communications , Hosseinali Jamal

Analysis and Design of a Highly Compact Ellipse-Shaped Ultra-Wideband Bandpass Filter (Uwb-Bpf) with a Notched Band , Xuetan Liu

Study of Ultra Wide Band Gap AlxGa1-xN Field Effect Transistors For Power Electronic Applications , Sakib Mohammed Muhtadi

Growth and Characterization of Anisotropic GaSe Semiconductor for Radiation Detection and THz Applications , Haseeb Nazir

Physical Characterization of Electrodeposited PCB Copper Foil Surfaces , Blessing Kolawole Ojo

Wideband Low Side Lobe Aperture Coupled Patch Phased Array Antennas , Dhruva Poduval

Software Modelling For Real World Faults On AC Transmission Protective Systems Analysis And Effects , Iandale Tualla

Improved N-Type 4h-Sic Epitaxial Layer Radiation Detectors and Noise Analysis of Front-End Readout Electronics , Khai V. Nguyen

Integrating Nano-Patterned Ferromagnetic and Ferroelectric Materials For Smart Tunable Microwave Applications , Tengxing Wang

An Application of Dempster-Shafer Fusion Theory to Lithium-ion Battery Prognostics and Health Management , John Weddington

A Lebesgue Sampling based Diagnosis and Prognosis Methodology with Application to Lithium-ion Batteries , Wuzhao Yan

Theses/Dissertations from 2016 2016

Positive Feedforward Control Design For Stabilization Of A Single-Bus DC Power Distribution System Using An Improved Impedance Identification Technique , Silvia Arrúa

Simulation Of GaN Based MIS Varactor , Bojidha Babu

High Gain Pattern Reconfigurable Antenna Arrays for Portable and Body-Centric Wireless Applications , Nowrin Hasan Chamok

An Improved Ship Design Tool for Comparing Performance of Multiple Ship Designs across User-Defined Missions , Helder Jose de Almeida Pais

Estimating Local Average Power In A Line-Of-Sight Indoor Channel: Spatial Sampling And Processing , Israt Jahan Disha

Time-Domain Measurement Of Ultrafast Magnetization Dynamics In Magnetic Nanoparticles , Brian Egenriether

Finite Control Set Model Predictive Control Of Direct Matrix Converter And Dual-Output Power Converters , Ozan Gulbudak

Distributed Optimization And Control Of Islanded Microgrids , Md Rishad Hossain

Engineering Model Of III-Nitride Power Heterostructure Field Effect Transistor On Silicon Substrate , Mohammad Mirwazul Islam

A Comparison Of FPGA Implementation Of Latency-Based Solvers For Power Electronic System Real-Time Simulation , Matthew Aaron Milton

Investigation Of Wide Bandgap Semiconductor Devices For Radiation Detection Applications , Rahmi Orhon Pak

Modeling and Loss Analysis of Wide Bandgap Power Semiconductor Devices , Kang Peng

Miniaturized RF Components With A Novel Tunable Engineered Substrate For Wireless Communication Systems , Yujia Peng

Wireless Channel Modeling For Networks On Chips , William Rayess

Comparative Analysis Of Current Control Methods For Modular Multilevel Converters , Jordan D. Rogers

Applications Of Impedance Identification To Electric Ship System Control And Power Hardware-In-The-Loop Simulation , Jonathan Siegers

System Level Analysis And Design For Wireless Inter-Chip Interconnection Communication Systems By Applying Advanced Wireless Communication Technologies , Xin Zheng

Theses/Dissertations from 2015 2015

Design, Fabrication, and Characterization of Pseudomorphic and Quasi-Pseudomorphic AlGaN Based Deep Ultraviolet Light Emitting Diodes Over Sapphire , Fatima Asif

III-V Nitride Based Microcantilever Heaters for Unique Multimodal Detection of Volatile Organic Compounds at Low Temperature , Ifat Jahangir

Defect Characterization of 4H-SIC by Deep Level Transient Spectroscopy (DLTS) and Influence of Defects on Device Performance , Mohammad Abdul Mannan

AN INVESTIGATION INTO QUASI-TUNABLE RF PASSIVE CIRCUIT DESIGN , Terry L. Moss

Fabrication and Characterization of Graphene based Biocompatible Ion-Sensitive Field Effect Transistor (ISFET) , Rina Patel

Investigation of Modular Multilevel Converter Performance under Non-Ideal Distribution System Conditions , Rostan Rodrigues

Technology Development and Characterization of AIInN/GaN HEMTs for High Power Application , Mahbuba Sultana

Dual-Band Non-Stationary Channel Modeling for the Air-Ground Channel , Ruoyu Sun

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines

Submissions

• Give us Feedback
• University Libraries

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

Electrical and Electronic Engineering Theses

Permanent uri for this collection.

This collection is made up of doctoral and master theses by research, which have been received in accordance with university regulations.

For more information, please visit the UCD Library Theses Information guide .

Recent Submissions

• Publication RF Amplification and Filtering Techniques for Cellular Receivers ( University College Dublin. School of Electrical and Electronic Engineering, 2021 ) Bozorg, Amir   The usage of various wireless standards, such as Bluetooth, Wi-Fi, GPS, and 4G/5G cellular, has been continually increasing. In order to utilize the frequency bands efficiently and to support new communication standards with lower power consumption, lower occupied volume and at reduced costs, multimode transceivers, software defined radios (SDRs), cognitive radios, etc., have been actively investigated. Broadband behavior of a wireless receiver is typically defined by its front-end low-noise amplifier (LNA), whose design must consider trade-offs between input matching, noise figure (NF), gain, bandwidth, linearity, and voltage headroom in a given process technology. Moreover, monolithic RF wireless receivers have been trending toward high intermediatefrequency (IF) or superhetrodyne radios thanks to recent breakthroughs in silicon integration of band-pass channel-select filters. The main motivation is to avoid the common issues in the currently predominant zero/low-IF receivers, such as poor 2nd-order nonlinearity, sensitivity to 1/f (i.e. flicker) noise and time-variant dc offsets, especially in the fine CMOS technology. To avoid interferers and blockers at the susceptible image frequencies that the high-IF entails, band-pass filters (BPF) with high quality (Q) factor components for sharp transfer-function transition characteristics are now required. In addition, integrated low-pass filters (LPF) with strong rejection of out-of-band frequency components are essential building blocks in a variety of applications, such as telecommunications, video signal processing, anti-aliasing filtering, etc. Attention is drawn toward structures featuring low noise, small area, high in-/out-of-band linearity performance, and low-power consumption. This thesis comprises three main parts. In the first part (Chapters 2 and 3), we focus on the design and implementation of several innovative wideband low-noise (transconductance) amplifiers [LN(T)A] for wireless cellular applications. In the first design, we introduce new approaches to reduce the noise figure of the noise-cancellation LNAs without sacrificing the power consumption budget, which leads to NF of 2 dB without adding extra power consumption. The proposed LNAs also have the capability to be used in current-mode receivers, especially in discrete-time receivers, as in the form of low noise transconductance amplifier (LNTA). In the second design, two different two-fold noise cancellation approaches are proposed, which not only improve the noise performance of the design, but also achieve high linearity (IIP3=+4.25 dBm). The proposed LN(T)As are implemented in TSMC 28-nm LP CMOS technology to prove that they are suitable for applications such as sub-6 GHz 5G receivers. The second objective of this dissertation research is to invent a novel method of band-pass filtering, which leads to achieving very sharp and selective band-pass filtering with high linearity and low input referred (IRN) noise (Chapter 4). This technique improves the noise and linearity performance without adding extra clock phases. Hence, the duty cycle of the clock phases stays constant, despite the sophisticated improvements. Moreover, due to its sharp filtering, it can filter out high blockers of near channels and can increase the receiver’s blocker tolerance. With the same total capacitor size and clock duty cycle as in a 1st-order complex charge-sharing band-pass filter (CS BPF), the proposed design achieves 20 dB better out-of-band filtering compared to the prior-art 1st-order CS BPF and 10 dB better out-of-band filtering compared to the conventional 2nd-order C-CS BPF. Finally, the stop-band rejection of the discrete-time infinite-impulse response (IIR) lowpass filter is improved by applying a novel technique to enhance the anti-aliasing filtering (Chapter 5). The aim is to introduce a 4th-order charge rotating (CR) discrete-time (DT) LPF, which achieves the record of stop-band rejection of 120 dB by using a novel pseudolinear interpolation technique while keeping the sampling frequency and the capacitor values constant.   71
• Publication Frequency Control of Virtual Power Plants ( University College Dublin. School of Electrical and Electronic Engineering, 2022 ) Zhong, Weilin   ; 0000-0001-6737-4873 The Virtual Power Plant (VPP) concept refers to the aggregation of Distributed Energy Resources (DERs) such as solar and wind power plants, Energy Storage Systems (ESSs), flexible loads, and communication networks, all coordinated to operate as a single generating unit. Using as starting point a comprehensive literature review of the VPP concept and its frequency regulation technologies, the thesis proposes a variety of frequency control and state estimation approaches of VPPs, as follows. First, the thesis studies the impact of coordinated frequency control of VPPs on power system transients, in which ESSs are utilized to provide fast frequency regulation. The thesis also proposes a simple yet effective coordinated control of DERs and ESSs able to integrate the total active power output of the DERs, and, thus, to improve the overall power system dynamic performance. The impact of topology on the primary frequency regulation of VPPs is also investigated. With this regard, two types of VPPs topologies are considered, that is, a topology where the DERs that compose the VPP are scattered all-over the transmission grid; and a topology where the DERs are all connected to the same distribution system that is connected to the rest of the transmission grid through a single bus. Next, the thesis proposes a control scheme to improve the dynamic response of power systems through the automatic regulators of converter-based DERs. In this scheme, both active and reactive power control of DERs are varied to regulate both frequency and voltage, as opposed to current practice where frequency and voltage controllers are decoupled. To properly compare the proposed control with conventional schemes, the thesis also defines a metric that captures the combined effect of frequency/voltage response at any given bus of the network. Finally, the thesis presents an on-line estimation method to track the equivalent, time-varying inertia as well as the fast frequency control droop gain provided by VPPs. The proposed method relies on the estimation of the rate of change of the active and reactive power at the point of connection of the VPP with the rest of the grid. It provides, as a byproduct, an estimation of the VPP’s internal equivalent reactance based on the voltage and reactive power variations at the point of connection. Throughout the thesis, the proposed techniques are duly validated through time domain simulations and Monte Carlo simulations, based on real-world network models that include stochastic processes as well as communication delays.   128
• Publication Low-Complexity Digital Predistortion for 5G Massive MIMO and Handset Transmitters ( University College Dublin. School of Electrical and Electronic Engineering, 2022 ) Wang, Xiaoyu   The demand for new wireless communication systems to support high mobility and low latency necessitates a rethink of the architecture of wireless communication systems as well as the design of their key components. This thesis presents several novel techniques to solve the major challenges in digital predistortion (DPD) for millimeter wave multi-input multi-output (MIMO) and handset transmitters to lower the hardware cost and computational complexity of the fifth generation (5G) communication systems. The first part of the thesis focuses on the architecture of the MIMO DPD solution for 5G transmitters. To extract DPD model coefficients, a feedback data acquisition path is required. In conventional single-input single-output (SISO) systems, the output is usually acquired directly from the power amplifier (PA) with a coupler. In massive MIMO systems, the number of RF chains is large. Using dedicated feedback paths for each PA separately is not feasible. To lower the hardware cost, a novel data acquisition scheme is proposed to obtain the output signals in far field over the air (OTA) using a single antenna and feedback loop, and then reconstruct the output of each PA. Simulation and experimental results demonstrate that the proposed OTA data acquisition can accurately reconstruct the output of each PA in the MIMO systems and the DPD solutions derived from the reconstructed data can successfully linearize the nonlinear MIMO transmitters. In the multi-user scenario, the nonlinearity of the transmitters varies with the movement of user equipments (UEs), and the DPD model coefficients need to be updated accordingly. To meet the requirement of high mobility, the complexity of the system update must be low. In the second part of the thesis, we present a new DPD system, where DPD model can be updated fast and accurately without capturing PA output or applying costly model extraction algorithms. In the proposed method, nonlinear characteristics of the PA are encoded into low-dimensional PA features using feature extraction algorithms. To identify DPD model coefficients, PA features are extracted first and the DPD model coefficients are then generated directly by DPD generator with PA features. Experimental results show that the proposed DPD solution can linearize PA with very low complexity compared to that using the conventional solutions. Finally, the focus shifts to handset transmitters. Conventionally, DPD is usually deployed for high power base stations. With the continuously increasing bandwidth, DPD may also be required for handset PAs in 5G communication systems. Different from the models used for base stations, DPD model for handset PAs must have very low complexity because of the stringent power budget limit. At the same time, the tolerance for load mismatch must also be considered. The third part of the thesis analyzes the characteristics of handset PAs with load mismatch and introduces a low-complexity DPD model based on magnitude-selective affine (MSA) function. Experimental results demonstrate that the extended MSA (EMSA) model shows better linearization performance while keeping much lower complexity than the conventional DPD models.   9
• Publication Circularly Polarized Antennas for 5G Millimetre-Wave Communications ( University College Dublin. School of Electrical and Electronic Engineering, 2022 ) Sadeghi-Marasht, Samaneh   The need of a higher data rate, lower latency, and cost efficiency led to the fifth-generation (5G) emerging as a new communication standard. This generation includes many unused frequencies with high available bandwidth channels that can provide higher capacities such as millimeter-wave (mm-wave) bands. One of the main challenges of working at high frequencies of this generation is path loss that needs to be addressed. To overcome this issue, a high gain antenna with a small size is required. Consequently, the first major question arises: how to effectively increase the gain and efficiency of the antenna at a high frequency with a small size. Importantly, it is vital to transport as much as data is possible without any sensitivity to the alignment of the transmitter or receiver antenna that can be satisfied by using circularly polarized (CP) radiating waves. Thus, the second research question emerges: how to provide high gain small size antenna with CP at high frequencies. To address the first two major research questions in this thesis we designed a miniature dual-band CP antenna that works at 28 GHz and 38 GHz with high gain. This antenna can be implemented in mobile devices, unmanned aerial vehicles (UAVs), and base stations (BSs) because of the small sizes of 11 × 14 × 0.508 mm3. For getting a deep insight into the structure and the design procedures of the dual-band antenna, characteristic mode analysis (CMA) is employed. Note that the CMA is not sensitive to the feeding position and the material in this analysis is not lossy. Therefore, after using CMA, the optimization is conducted in the full-wave simulation as the feeding is added to the structure, and the material is lossy. The single CP antenna covered the bands of 27-28.4 GHz and 34.7-40 GHz, with a maximum gain of 6.3 dBiC and 5.51 dBiC at 28 GHz and 38 GHz, respectively, whereas the radiation efficiency is 94% and 96% with the ARBW of 2.5% and 1.5%. A phased antenna array is then constructed to provide a higher gain for this designed dual-band antenna. In a phased antenna array we consider four designed single element antennas close to each other to create a 2 × 2 antenna array with high gain at 28 GHz and 38 GHz. For a 4 × 4 antenna array, an electromagnetic band-gap (EBG) is used to reduce the mutual coupling between elements in the array. The radiating signals will be sent to different users with circular polarization via electronic beamforming. The position of each antenna element is also optimized to provide the constructive radiating wave towards our desired directions. The array was able to steer the beam between -26.5 to 29.5 degrees for the lower band and -29.5 to 35.5 degrees for the higher band with the maximum gain of 12.8 dBiC and 11.5 dBiC, respectively. Another method to enhance the gain is implementing a lens structure in front of the radiating antenna. Here, a significant challenge is to maintain the CP of the incoming CP wave while the gain is increased. Therefore, the third research question is how to design a lens with the capability of enhancing the gain and keeping the CP when the lens is fed by a CP antenna source. Concerning the third major research question, in this thesis, we designed a CP lens structure. First, a multi-layer lens with a thickness of 2.03 mm was designed, and then a one-layer lens structure with a thickness of just 0.508 mm was made. The lens was located in front of different radiating antennas. These lens structures resulted in significant gain enhancement for various feeding antennas working at 28 GHz. The unit cell of the one-layer lens can provide a broad phase shift compared to the multi-layer counterpart. The proposed lens structures not only increased the gain of the incoming CP wave but also kept its polarization to overcome the issues of reflectivity, absorption, inclement weather, and mis   16
• Publication Contributions to the theory and development of low-jitter bang-bang integrated frequency synthesizers ( University College Dublin. School of Electrical and Electronic Engineering, 2022 ) Avallone, Luca   The advent of next-generation wireless standards demands ever-increasing data-rate communication systems. It mainly involves a higher carrier frequency to take advantage of wider bandwidth channels and more complex modulation schemes to pack more information into each symbol. In this context, the bottleneck is represented by the frequency synthesizer used to generate the local oscillator signal for the transceiver, which has to operate under stringent low output jitter requirements. Such performance must be provided at low power dissipation and area consumption in order to meet the requirements of low-cost and high integration level of the modern communication systems. The digital phase locked loop architecture can meet the required jitter performance while synthesizing fractional-N frequencies. Such PLLs offer significant advantages over their traditional analog counterpart in terms of area occupation, flexibility and scalability in advanced deep sub-µm CMOS technologies. The digital PLL topology based on a bang-bang phase detector, denoted bang-bang PLL, which is a single bit digital phase detector, leads to a less complex and more power-efficient architecture, but, on the other hand, it also introduces a hard nonlinearity in the loop, making the analysis of the bang-bang topology more challenging than in the multi-bit case. A comprehensive phase noise analysis of bang-bang digital PLLs is presented which overcomes the limitations of previous models and it is valid in all cases where physical noise sources (i.e. reference and DCO) are dominant with respect to quantization errors. In particular, (i) input-referred jitter is estimated by means of a linear time-domain analysis derived from a nonlinear DPLL model, and (ii) phase noise spectra are predicted using a discrete-time domain model that accounts for time-variant effects that arise from the intrinsic multirate nature of the DPLL. The possibility of accurately determining the DPLL jitter and phase noise spectra, enabled by the novel analysis presented in this thesis, is key to significantly speeding up the design-space exploration phase, since it allows one to perform quick and precise parametric sweeps. However, even when designed properly, bang-bang PLLs are affected by the unavoidable bang-bang phase detector quantization noise, which is added on top of the intrinsic reference and DCO phase noise. The quantization noise can be appreciated in the PLL's output spectrum as increased in band noise with respect to the analog counterpart, that, in fact, still achieves superior performance in terms of jitter-power. This results in worse integrated jitter performance for the same intrinsic levels of reference and oscillator phase noise. To overcome the binary phase detector quantization noise in DPLLs, state-of-the-art works rely on a multi-bit time-to-digital converter to digitize the PLL phase error with a physical resolution below the input jitter, leading to increased design complexity, with an associated area and power penalty. In order to overcome the ultimate limit of the bang-bang PLL, a digital PLL based on a bang-bang phase detector with adaptively optimized noise shaping has been fabricated in a 28nm CMOS process. The prototype occupies a core area of 0.21 mm2 and draws 10.8 mW power from a 0.9 V supply. The integrated jitter is 69.52 fs and 80.72 fs for the integer-N and the fractional-N case, respectively. Achieving a jitter-power figure-of-merit of -251.5 dB in fractional-N mode, the proposed system effectively bridges the gap to analog implementations. The first chapter of this work is introductory, and is intended to give some background information needed to underpin the remaining part of the thesis. The following chapters, 2, 3 and 4, collect the results achieved during the PhD activity, and each of them is associated with a publication. In the last chapter, conclusions are drawn and the open points are discussed in order to be considered for future work.   192
• 1 (current)

Home > ETD > DEP_ECE > ETDB_ECE

Electronics And Communications Engineering Bachelor's Theses

Theses/dissertations from 2023 2023.

Portable semi-autonomous robot for agricultural insect pest recognition and elimination , John Dominic B. Aguila, Gian Kendrick T. Go, Carl Nixon D. Ong, Marc Lance J. Orsos, and Bryan Kenneth Q. Que-Unsu

Developing an automated IoT-based indoor farming system with optimal LED light quality control for leafy vegetable growth , Andre' Mitchelle L. Bamba, Elmark Joseph L. Corpus, Martin Adrian C. Enghoy, and Hanna Camille B. Gabay

LoRa on the bus: Time and location monitoring system for P2P buses , John Herald Angeles Bañez, Polo Gi Magtibay Dimayuga, Dominic Andrei Gawat Limpengco, and Lorenzo Miguel Ricafranca Pepino

PnP-MEDER: A plug-and-play P2P modular DC microgrid solution for rural areas , Angelo S. Casimiro, Lois Raniel D. Closa, Juan Miguel A. Sanchez, and Pierre Randell S. Yao

Development of an automated microcontroller-based in-vessel composting system for the household setting , Malcolm Andersen H. Co, Jan Ralph U. Go, Francis John N. Magallanes, and John Matthew B. Vong

Machine learning-based identification and classification of pulmonary nodules , Theodore Benito Cham Coteok II, Lenard Ryan Santos Llarenas, Joseph Villa Portugal, and Matthew Edward Segismundo Toro

Development of a cloud-based robotic arm platform in electrical circuit laboratory for Labvolt Equipment , Athena Bianca P. Dionido, Erika Kimberly H. Go, Matthew H. Gonzales, Jahmil Gabriel P. Reyes, and Errol John S. Velasco

A network-based solution and knowledge-building portal for monitoring goat feeding behavior pattern and agricultural technology information sharing , Anton Luis C. Garces, Gianne Marcus V. Obusan, Julianne Abbe R. Ong, and Samuel C. Perez

Intelligent flock of surface vehicles for collecting solid waste in bodies of water , Carl Heinrich I. Ong, Enrico Sebastian C. Salazar, Pierre Marie R. Salvador, and Oliver Scott Y. Te

Theses/Dissertations from 2022 2022

A remote monitoring system for pico-hydroelectric system , Darlene Alyssa P. Abaluna

Detection of harmful gasses in improvised explosive device using android technology: A prototype , Adrian William S. Alano, Arl Marion Josef Lintag Divino, and David Manasseh Crisostomo Soliman

Joystick controlled autonomous robotic arm using inverse kinematics with object detection , Edmark Jayson Q. Aldea, Roger Jayson M. Mendez III, Macario N. Peralta V, and Lia Sophia Y. San Miguel

Universal robust vehicle identification system , Lorenz Joshua Sebastian Alfonso, Tiffany Joy Ferrer Benitez, Cseanne Jaycons Original Cabalquinto, Francis Jerome Tabieros Perez, and Janet Yang

Human presence detection based on gathered thermal datasets through deep learning , Miguel Carlos Cariño Amoroso, Kenneth Roel Catapang Atienza, Riff Kurtees Tan Ladera, and Nico Angelo Mendoza Menodiado

Real-time spectrophotometric determination of coffee roast degree , Jerome Moises L. Andres, Angelo C. Araño, Don Levi Andre V. Diwara, and Cedric Paul M. Sazon

Solid waste identification and segregation hub (S.W.I.S.H.) , Ryan Jasper V. Ang, Justin James N. Hizon, and Kyle Daniel P. Pimentel

Development of a home healthcare system for a person under monitoring with remote access through web application , Jan Luis V. Antoc, Teofilo M. Contreras Jr., Michael Ryan B. Panes, and Emerson Karl M. Tiu

Drone team manipulation using hand gestures for object transportation , Reginald Geoffrey Lausa Bayeta IV, Kyle Jomar Casabuena Megino, Angelo Jose Teodorico Diaz Parco, and Anjelo Louise Gerardo Vicente

Development and implementation of a game theory based ride-sharing technique , Gabriel Antonio M. Borja, Gerard Ryan C. Ching, Francis Miguel M. Espiritu, and Kerwin D. Go

Design and implementation of LoRaWAN autonomous base station as a communication network for rural areas , John Benedict M. Carbonel, Angelo Crom S. Pestaño, Gilbert M. Roque Jr., Migio Antonio C. Tan II, and Raphaele Timothy A. Villarubin

Advance scorecard for boxing: Combat sport analysis with deep learning , Phillip Christian C. Cardino, Jamie Lynn T. Chua, and John Rossi Rafael R. Llaga

Designing a semi-autonomous medicine dispensing mobile robot using IoT with obstacle detection capabilities , Maria Victoria Tuazon Ching, Margaret Justo Dionisio, Stephen Gabriel Fernandez Garbo, Jann Carlo Nano Red, and Vince Macanas Salloman

Dagas: A mobile and web-based disaster relief goods management system , Kenley Lewis Ting Chiu, Jet Orville Que Chua, Emil John David Lopez, and Josef Lyle Huan Solis

PCB fault detection through the use of convolutional neural networks , Aivan Jarell P. Chua and Daniel Edric Y. Ong

Emotion-based music player using facial recognition , Adrian Richton D. Co, Nathan Jonah D. Delgado, and Jose V. Medalla III

E-balloon: A propellerless flight control system , Patrick Ross S. Coronel, Rafael Antonio S. Duenas, Efi Mikhael B. Gabriel, and Kyle Austin B. Hartigan-Go

Development of mobile-based point of sales android application for food and drink stalls , Trisha Angeline M. DeVera

Automated IoT enabled vertical farming: Planting atypical crops in an urban environment , Floyd Robert Cocabo Dim and Daniel Lester Costes Guillermo

Breast cancer screening application using thermographic images and machine learning analysis , Rency Christelle O. Evidente, Vincent Rafael T. Sayoc, Jason Patrick T. Uy, and Leila Yasmin C. Young

MRT trains mobility tracking using LoRa network , Samuel Alexander A. Pasia, Vince Matthew A. Rivera, Jereme Adriane D.G. Sy, and Bianca Clarisse Y. Tan

WiFi-based indoor positioning system in a multilevel building , Joshua Kenichi Y. Sim, Rica Rizabel M. Tagabuhin, and Jan Jayson S.D. Tirados

Theses/Dissertations from 2021 2021

Real time visual traffic map for vehicle density estimation using IP-CCTV networks , John Carl B. Bautista, Adrian Giuseppe Francis M. Fernan, Zendrel G. Gacuya, and Eldrine Jay Perez

Simulation of centroid control for payload transport using cooperative unmanned aerial vehicle team on a virtual environment , Lourdes Racielle B. Bulda, Matthew Zandrick G. Marasigan, Isabel F. Navarro, and Victor Antonio R. Valdes

Smart medicine dispenser with online dispensing capabilities , John Joseph M. Castillo

Implementation of field oriented control on brushless DC motors for UAV application , Jonathan U. Lao and Paulo Enrique D. Martin

LoRa rescue: Emergency distress signal geolocation system , Gregory James G. Pe, Robert Ianny Roi F. Quijano, and Benjamin Emmanuel C. Uy

Advanced Search

• Notify me via email or RSS
• Collections
• Disciplines
• Colleges and Units

Submissions

• Submission Consent Form
• Animo Repository Policies
• Submit Research
• Animo Repository Guide
• AnimoSearch
• DLSU Libraries
• DLSU Website

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

• Who’s Teaching What
• Subject Updates
• MEng program
• Opportunities
• Minor in Computer Science
• Resources for Current Students
• Program objectives and accreditation
• Graduate program requirements
• Admission process
• Degree programs
• Graduate research
• EECS Graduate Funding
• Resources for current students
• Student profiles
• Instructors
• DEI data and documents
• Recruitment and outreach
• Community and resources
• Get involved / self-education
• Rising Stars in EECS
• Graduate Application Assistance Program (GAAP)
• MIT Summer Research Program (MSRP)
• Sloan-MIT University Center for Exemplary Mentoring (UCEM)
• Electrical Engineering
• Computer Science
• Artificial Intelligence + Decision-making
• AI and Society
• AI for Healthcare and Life Sciences
• Artificial Intelligence and Machine Learning
• Biological and Medical Devices and Systems
• Communications Systems
• Computational Biology
• Computational Fabrication and Manufacturing
• Computer Architecture
• Educational Technology
• Electronic, Magnetic, Optical and Quantum Materials and Devices
• Graphics and Vision
• Human-Computer Interaction
• Information Science and Systems
• Integrated Circuits and Systems
• Nanoscale Materials, Devices, and Systems
• Natural Language and Speech Processing
• Optics + Photonics
• Optimization and Game Theory
• Programming Languages and Software Engineering
• Quantum Computing, Communication, and Sensing
• Security and Cryptography
• Signal Processing
• Systems and Networking
• Systems Theory, Control, and Autonomy
• Theory of Computation
• Departmental History
• Departmental Organization
• Visiting Committee
• Undergraduate programs
• MEng Thesis
• Past Terms' Subject Updates and WTW
• Subject numbering
• FAQ about Fall 2024 Changes
• 2022 Curriculum Transition
• 6-1: Electrical Science and Engineering
• 6-2: Electrical Engineering and Computer Science
• 6-3: Computer Science and Engineering
• 6-4: Artificial Intelligence and Decision Making
• 6-7: Computer Science and Molecular Biology
• 6-9: Computation and Cognition
• 11-6: Urban Science and Planning with Computer Science
• 6-14: Computer Science, Economics, and Data Science
• Requirements
• Application, Acceptance, and Deferral
• Thesis Proposal
• UROP and SuperUROP
• Study Abroad
• USAGE Members, 2023-24
• 6-A Industrial Program
• Degree Audits and Departmental Petitions
• Space on Campus
• Resources for International Students
• Resources for Incoming Double Majors
• Resources for Advisors
• Graduate Admissions FAQs
• Graduate Admissions Information Letter
• What faculty members are looking for in a grad school application essay.
• Conditions of Appointment as a Teaching Assistant or Fellow
• RA Appointments
• Fellowship Appointments
• Materials and Forms for Graduate Students
• Subject Updates Spring 2024
• Subject Updates Fall 2023
• Subject Updates Spring 2023
• Subject Updates Fall 2022
• Subject Updates Spring 2022
• Subject Updates Fall 2021

Your MEng thesis describes the original research that you contributed to your MEng project. Though the document itself is not due until the end of your MEng, you should be working towards your thesis each semester that you are a registered MEng student. You can read more about what comprises a thesis at the Office of Graduate Education’s website .

Getting Help with Your Thesis

Throughout your MEng, you should be in continual conversation with your thesis research advisor about your progress as well as the thesis itself. For additional support, consider some of the following resources:

• Writing and Communication Center
• EECS Communication Lab
• Phoebe Ayers , the EECS Librarian, for help with research
• Additional workshops hosted by OGE

If you are struggling to make progress on your thesis, you are also welcome to meet with someone in the EECS Undergraduate Office .

All graduate theses are required to be submitted to Institute Library where they are available to the public. Theses classified by the government as ‘Confidential’ or ‘Secret’ for reasons of national security, or ‘Company Confidential” by a company for proprietary reasons will not be accepted. Theses completed in classified sections of 6-A companies, Lincoln Laboratory or Draper Lab must be deemed unclassified by the government. If you are working with one of these companies, be sure to discuss thesis copyright with your research advisor early in your MEng.

Formatting and Submission

MIT Libraries maintains formatting guidelines for all MIT theses. It’s especially important to make sure your title page and abstract look exactly like the examples shown there. Many students start by using the Unofficial Thesis template , but remember to double-check against the official formatting guidelines. Check out the Thesis Checklist from the Libraries to help keep on track.   Submit your title page information . This is important for ProQuest selections and for speeding up thesis processing for the MIT Libraries.

For EECS MEng theses

• Make sure to include your SB degree information (see the title page example ), even if you’re getting SB and MEng concurrently. Include double major, if applicable.
• The department is “the Department of Electrical Engineering and Computer Science”
• The degree is “Master of Engineering in Electrical Engineering and Computer Science” unless you are part of the 6-7 MEng program, in which case it’s “Master of Engineering in Computer Science and Molecular Biology” or the 6-14 program which is “Master of Engineering in Computer Science, Economics, and Data Science”. (Note, in all cases, “Master” not “Masters”)
• The degree date for this term is May 2024 no matter what month you submit your thesis. The only possible degree date months are May, September, and February.
• The author hereby grants to MIT a nonexclusive, worldwide, irrevocable, royalty-free license to exercise any and all rights under copyright, including to reproduce, preserve, distribute and publicly display copies of the thesis, or release the thesis under an open-access license.
• The name/title for the “Accepted by” line on the title page is “Katrina LaCurts, Chair, Master of Engineering Thesis Committee”

For the electronic submission, your title page should include no signatures ; not even your own, and no lines for signatures . When you are ready to submit your thesis, you can do so here ; the deadline for submission is set by the registrar each semester (see here ). 6-A students must also submit a thesis release letter that matches this template . These letters should be sent to [email protected] .

Thesis Holds

Under certain circumstances – most commonly for issues related to patents or security clearances – you can arrange for a brief delay of the official publication of your thesis in the MIT Libraries. Please see The Office of Graduate Education’s page for more information.

Guidelines for the use of ChatGPT when writing your EECS thesis (MEng, SM, PhD)

ChatGPT is a natural language processing tool driven by AI technology that assists with the composition of text, such as text found in emails, essays, and code. Text is also found in the thesis that is required as one deliverable of an advanced degree in EECS. The EECS Department views a “thesis” as a compilation of the contributions made to the field by the author, or a discussion of the knowledge acquired in answering the research questions. The student is the authority of the material contained or described in the thesis and is the sole author. The EECS Department expects the author of the thesis to compose original drafts of the text to convey accurately and completely the work accomplished for the advanced degree in EECS. Once a final draft of the thesis is obtained, ChatGPT may be used to improve the grammar or to provide a manner of proofreading of the draft. The EECS Department does not allow the use of ChatGPT to compose text starting from bulleted text or from an arrangement of phrases. If ChatGPT is implemented in the creation of a final thesis, that is submitted to DSpace for archival storage, the EECS Department requests that the use of ChatGPT to be acknowledged, or referenced, in the submitted thesis manuscript. (Effective April 20, 2023)

• Log In Log in with your UoM account Problems logging in with your UoM account? or Guest login Email address Password No UoM account? Click here to register a guest account. Have you forgotten your guest credentials?

Electrical and Electronic Engineering - Theses

Permanent uri for this collection, results per page, search results.

• Item No Preview Available A Multifunctional Smart Field-Programmable Radio Frequency Surface Li, Tianzhi ( 2023-04 ) Wireless communication technology has completely transformed the way we communicate and access information. It operates on the principles of electromagnetic wave propagation, as described by Maxwell's equations. The scope of wireless communication is vast and includes satellite communication, handheld device communication, and Internet of Things (IoT), which have revolutionized fields of industry, healthcare, transportation, education, and entertainment. As demand for faster and more reliable communication continues to grow, a range of wireless communication standards has been developed, including WiFi, BLE, cellular networks, near-field communication (NFC), and ZigBee, each operating at a unique frequency range. Antennas that can operate across multiple communication standards have remained a challenge due to the interdependent factors of antenna geometry, size, and RF characteristics. As the number of devices with wireless connectivity increases dramatically, the spectrum resource is getting limited, which results in congestion and reduced performance. Reconfigurable antennas have been intensively studied in the last few decades to mitigate this challenge. Although reconfigurability in operating frequency, radiation pattern and polarization have been implemented, limitations including lack of programmability, pattern diversity, and self-adaptive capability against environmental interference exist. To address these limitations, we proposed a new concept called Field-programmable RF surface (FPRFS), which allows for the control of current flow on the surface to achieve desired antenna characteristics and impedance matching capabilities. This work starts with the theoretical analysis and creates the mathematical model for the FPRFS in antenna, impedance matching network, and filter applications. Our research demonstrated the reconfigurability of FPRFS antennas in operating frequency, radiation pattern, and polarization reconfigurability with radiation gain and efficiency levels that are comparable to those of conventional fixed patch antennas and enhanced immunity to surrounding obstacles. We developed a software algorithm for the FPRFS that enables it to automatically optimize its configuration in real-time, thereby adapting to changing load impedance or environmental interferences.

• 1 (current)

  [email protected]

  WhatsApp (messaging): +447402321788

• Login    Forgot Password

• Lab Reports
• 2D/3D Modelling
• Engineering Analysis (CFD/FEA)
• Engineering Thesis
• Programming assignment help
• Industrial Attachment Report/practicum report
• Mathematics assignment help

Electrical Engineering Thesis

• 1 Introduction To Electrical Engineering Thesis
• 2 Sample Electrical and Electronics Engineering Thesis Topics with All Project Files
• 3 Learning Outcomes of An Electrical and Electronics Engineering Thesis
• 4 Types Of Electrical and Electronics Engineering Thesis
• 5 Selecting Electrical and Electronics Engineering Thesis Topic 
• 6 Electrical and Electronics Engineering Final Year Project Deliverables
• 7 Format Of an Electrical and Electronics Thesis Report
• 8 Why use Topengineeringsolutions.com electrical engineering thesis help service?

Introduction To Electrical Engineering Thesis

This article provides detailed information regarding what an electrical engineering thesis is, how to select your electrical engineering thesis topic, how to prepare and run your project, the assessment process as well as sample engineering thesis topics. In summary, this article has the information you need to successfully complete your electrical engineering final year project. The article also gives a list of sample electrical engineering thesis and a corresponding link to sample thesis reports, circuit simulation files, codes and many more. The project files can be found here . The project list provided in this article gives a brief description of the project, a list of the available files as well as a link to the website where you can access the files. Click the link provided next to the sample project to access the materials. Obtaining these files (codes, circuit simulation etc) will enable you finish your electrical engineering thesis without a struggle. You can also order a custom electrical engineering dissertation for the selected topic and we will be glad to assist you.

Your dissertation is an important piece of individual and independent work. It can be the most exciting and challenging piece of work you do at university, since you are able to research a topic of interest to you in some depth. The electrical engineering dissertation is different from electrical engineering coursework , because it is a much larger piece of work, and you have a lot more freedom about the topic and approach. You will be assessed on how you manage your electrical engineering final year project, as well as on the report and presentation to examiners. An electrical engineering thesis is a substantial piece of work in which you can demonstrate your ability to propose and solve problems. It requires you to become familiar with the research process, as well as developing and presenting a detailed academic argument. The work associated with an electrical engineering dissertation will generally call on you to decide on a research problem, thoroughly review relevant work in the, carry out the research and analysis, and draw conclusions. Generally, the work associated with the thesis depends on the type of electrical engineering thesis selected.

Sample Electrical and Electronics Engineering Thesis Topics with All Project Files

Sample electrical and electronics engineering thesis topics are listed here. Some of the listed topics have a report and all the project files such as codes, wiring diagrams and circuit simulations. Click on the provided link in order to access the materials to help you in your electrical engineering thesis completion. You can also order a custom copy of the project for the selected topic. If you have your own unique electrical engineering final year project topic and you want our assistance, please make an order or contact us and we will help you. For urgent inquiry, send a WhatsApp message to: +44 7402 321788

More electrical engineering thesis topics can be found on university websites like this one .  

Learning Outcomes of An Electrical and Electronics Engineering Thesis

The main aim of an electrical and electronics engineering dissertation is to develop the students’ problem solving, investigative, technical, critical, and communication skills through their managing and accomplishing a substantial individual piece of work. The specific learning outcomes are as illustrated below:

• Demonstrate competence in an advanced aspect of electrical and electronics engineering including awareness of current research and research methods
• Identify and describe the performance of electrical engineering systems and components through the use of analytical methods and/or modelling techniques
• Demonstrate creative and innovative ability on the synthesis of solutions and in formulating design, taking into account constraints of environmental impact, sustainability, health and safety, cost and/or customer and user needs as appropriate
• Understand the context in which electrical engineering knowledge is applied, and appreciate the wider multidisciplinary engineering context of the project and its underlying principles;
• Manage a project, develop ideas and use relevant electrical engineering tools. Depending on the type of electrical engineering final year project, students will develop specific practical skills or they will learn how to use computer software for analysis and design.
• Liaise and work with professionals in various fields;
• Manipulate and sort data, present data in technical reports, present and effectively communicate at a satisfactory level;
• Work independently and manage time and resources in order to execute and complete a project to a satisfactory standard.

Types Of Electrical and Electronics Engineering Thesis

The two main electrical engineering final year project types are: practical electrical engineering dissertation and theoretical electrical engineering dissertation. Practical electrical and electronics engineering final year projects can be further divided into the following categories:

• Design, build and test/manufacture electrical engineering thesis
• Electrical engineering dissertations that require modelling and simulation of an electrical engineering process
• Detailed design of an electrical engineering system
• Electrical engineering thesis involving creating and testing of a computer software

Detailed explanation of types of engineering thesis can be obtained here . You can also view sample projects (both practical and theoretical electrical engineering thesis) from engineeringfinalprojects.com .

Selecting Electrical and Electronics Engineering Thesis Topic 

Selection of your electrical engineering thesis topic is an important task because it directly affects the likelihood of successfully completing the thesis. There are three main ways through which an electrical engineering dissertation topic can be selected:

• From a list provided by members of staff
• Your own unique topic based on your area of interest or independent research
• An electrical engineering thesis topic sponsored by a company

The procedure for selecting an engineering thesis topic is well explained in the link. However, you should put in mind that the electrical engineering thesis topic selected should be a topic that you find interesting and you should have access to all materials and equipment necessary to complete it.

Electrical and Electronics Engineering Final Year Project Deliverables

 Assessment of your electrical engineering thesis is based on a number of deliverables with the main aim being to evaluate the extent by which you have satisfied the learning outcomes. The 5 main electrical and electronics engineering thesis deliverables are listed below:

• Electrical engineering Thesis Proposal. The engineering thesis proposal can also be known as engineering thesis plan. Other key deliverables that accompany an electrical engineering thesis proposal include an electrical engineering thesis Risk Assessment, Ethics Assessment and an electrical engineering final year project Timeline/Plan.
• Electrical Engineering Thesis Interim Report or Progression Report
• Electrical Engineering Thesis Final Report
• PowerPoint Presentation (Slides or Poster)
• Oral Presentation/Examination (Viva)

To get more details about electrical and electronics engineering thesis deliverables, check here .

Format Of an Electrical and Electronics Thesis Report

The report structure or format of an electrical engineering thesis follows the standard engineering dissertation report structure with slight variations between institutions. In addition to the structure, make sure to follow the recommendations regarding referencing, numbering, tense and voice, grammar and plagiarism.

Why use Topengineeringsolutions.com electrical engineering thesis help service?

• Well-qualified electrical engineering experts with experience in writing electrical engineering thesis

Our electrical engineering writers are well versed with various electrical engineering software packages including LabVIEW , MATLAB , PROTEUS, LTspice, NI Multisim, Simulink and numerous programming languages. The experts are able to handle a wide variety of electrical engineering dissertations. Our electrical engineering writers are also able to help you select the most suitable electrical engineering thesis topic.

• High Quality Electrical Engineering Thesis Report

In addition to submitting reports that meet the expected technical requirements, our electrical engineering writers also ensure that the final electrical engineering thesis report you receive is free from errors, with correct grammar, has absolutely no spelling mistakes, well paragraphed, neat and presentable. All the diagrams and tables will be well labelled and numbered. You are also allowed to request for any necessary amendments to the report based on your supervisor’s feedback.  

• On time delivery of your electrical engineering thesis

Our expert electrical engineers make sure the submission of all orders is made prior to the deadline so that you can have sufficient time to obtain your supervisor’s feedback and make any necessary editing before submitting the final paper.

• We are available 24 /7

Our customer care support is available at any time round the clock. You free to contact us any time via WhatsApp, email, livechat tool on our website, and Twitter among others.

• Original electrical engineering thesis report without plagiarism

What we give you is completely original and well researched electrical engineering thesis report. After writing and editing, we proofread and by using reliable plagiarism detection software, like Turntin.com, we check the % similarity of the report.

• Electrical engineering thesis for all academic levels

Our electrical engineering thesis help service covers the undergraduate, Masters as well as PhD level.

• Affordable prices

The cost of our quality thesis projects and all other products is student friendly. We allow for partial payments (instalments)

• Confidentiality (Privacy guaranteed)

Your identity is kept private.

• Mechanical engineering homework help
• Essay Writing Service Singapore
• Mechanical Engineering Assignment Help
• Civil Engineering Homework Help

Our Services

Engineering.

•   Mechanical Engineering Assignment Help
•   Mechanical Engineering Homework Help
•   Civil Engineering Homework Help
•   Essay Writing Service Singapore
•   Practicum Report Assignment Help
•   Thermodynamics Assignment Help
•   Electrical Engineering Assignment Help
•   Assignment Help Singapore
•   Civil Engineering Assignment Help
•   Electrical Engineering Homework Help
•   LabVIEW Assignment Help
•   Matlab Assignment Help
•   Matlab homework help
•   Chemical Engineering Assignment Help
•   Chemical Engineering Homework Help

PROGRAMMING

•   PHP Assignment Help
•   Programming Assignment Help
•   Visual Basic Assignment help
•   HTML Assignment Help
•   Python Programming Assignment Help
•   Database Assignment Help
•   C Sharp Assignment Help
•   C Programming Assignment Help
•   Computer Science Assignment Help
•   Android Assignment Help
•   Assignment Help Canada
•   Java Assignment Help
•   Assignment Help Brisbane
•   Assignment Help Adelaide
•   Australia Assignment Help 2

CAD/FEA/CFD

•   Solidworks Assignment Help
•   AutoCAD Assignment Help
•   Architecture Assignment Help
•   Calculus Homework Help
•   Assignment Help Australia
•   Biology Assignment Help
•   Psycology Assignment Help
•   Chemistry Assignment Help
•   History Assignment Help
•   Math Assignment Help
•   Science Assignment Help
•   Geography Assignment Help
•   Essay Writing
•   Hospitality Management
•   Assignment Help

BASIC SUBJECTS

•   Mechanical Engineering Thesis
•   Electrical Engineering Thesis
•   Civil Engineering Thesis
•   Chemical Engineering Thesis
•   Assignment Help USA
•   Assignment Help UK
•   Assignment Help Sydney
•   Assignment Help Queensland
•   Assignment Help Perth
•   Assignment Help New Zealand
•   Assignment Help Malaysia
•   Assignment Help in Melbourne
•   Assignment Help Darwin
•   Assignment Help Canberra

• Directories
• Find Articles
• Books, E-Books & Textbooks
• Engineering Case Studies
• Dissertations/Theses
• Manage Your Citations This link opens in a new window
• Manage Your Data This link opens in a new window
• Course Reserves
• Technical Reports This link opens in a new window
• Standards This link opens in a new window
• Patents & Trademarks This link opens in a new window
• Conference Proceedings
• Start Your Research
• Research Guides
• University of Washington Libraries
• Library Guides
• UW Libraries
• Electrical and Computer Engineering

Electrical and Computer Engineering: Dissertations/Theses

Finding uw dissertations & theses.

To locate dissertations and theses written at the University of Washington:

• ResearchWorks at the University of Washington More than 6600 full-text dissertations produced at the University of Washington; full coverage from 1997-2008; sporadic coverage prior to 1997. [UW restricted]
• UW Libraries Search Search by author's name or browse EE dissertations & theses by typing in "thesis electrical engineering." EE dissertations & theses are shelved on the 4th floor of the Engineering Library under the call number TK7 ThXXXXX.
• Guide to Finding Dissertations & Theses

Finding Non-UW Dissertations & Theses

• DSpace@MIT Contains over 25,000 dissertations & theses written at the Massachusetts Institute of Technology (MIT).
• UC Berkeley EECS Electrical Engineering and Computer Science dissertations written at the University of California Berkeley. Many are available in full-text.
• Electronic Theses & Dissertations at Virginia Tech Contains over 16,000 theses & dissertations written at Virginia Tech.
• << Previous: Engineering Case Studies
• Next: Manage Your Citations >>
• Last Updated: Dec 13, 2023 10:31 AM
• URL: https://guides.lib.uw.edu/research/ece

Electrical Engineering

• Getting Started
• Keeping Current

Introduction

Gather Your Tools

Determine the Project's Scope

Create the Search Strategy

Determine What Resources to Use

Search, read, refine, repeat.

Saved Searches, Alerts and Feeds

• STEM Biographies & Info
• Writing and Citing

This page focuses on how to do an in-depth literature review for a dissertation, thesis, grant application or lengthy term paper in electrical engineering.  

• For a more general description of what an in-depth literature review is and how it looks, see our guide on " Literature Reviews and Annotated Bibliographies " created by Ed Oetting, history and political science librarian.
• For lower-level engineering undergraduate students who are doing a short term paper, the " How to Research a Topic " page on the " Engineerng Basics" guide may be more applicable.

Library Account Is your library account clear of fines?   If not, you may not be allowed to check out more books nor renew books you already have.  All library notices are sent via email to your "asu.edu" address; if you prefer to receive email at a different address make sure you have forwarded your asu.edu correctly.  Also, make sure that your spam filter allows the library email to come through. 

Illiad (Interlibrary Loan) Account   If you don't already have an ILLiad account, please register for one.  Interlibrary loan services will get you material not available at the ASU Library and also scan or deliver materials from the libraries on the other ASU campuses.

Determine the Project's Scope.

Do you know what you are looking for?  Can you describe your project using one simple sentence or can you phrase the project as a question?  Without a clear idea of the project, you may not be able to determine which are the best resources to search, what terminology should be used in those resources, and if the results are appropriate and sufficient.    

If you're having difficulty getting your project described succinctly, try using a PICO chart to identify the concepts involved:

• P is the popluation, problem, predicament or process
• I is the intervention or improvement
• C is what you'll compare your intervention/improvment to, and
• O is the outcome (or results of the comparison of I and C ) 

For example: 

Your client, the owner of a nuclear power generating facility, has had several less than optimal safety inspections recently.  The inspectors have singled out operator error as a major concern and have required changes in employee training.  But is more training the solution?  The employees complain that the plant's poorly designed control room hampers their ability to respond to non-standard situations.  Could a redesign improve performance and decrease the occurance of unsafe events?   Your client wants more than just your opinion, he wants to see the data to back it up.   So, what can you find in the literature?

Here's one way that the PICO chart could be filled out:     

• P =   nuclear power safety  
• I  = human factors engineering
• C  =  additional training; little or no human factors engineering used  
• O = accident rate or safety inspection comparison

And here are examples of possible search statements:  

• I am looking for ways that human factors engineering can improve safety in the nuclear power industry.
• Is additional training or employing human factors engineering the better method for reducing safety violations in a nuclear power plant? 

Your research will always start with a " P AND I " search; those are the most important pieces of the puzzle.  However, once you have the results from that search, you'll need to know where you want to go with those results; that's when the C and O concepts need to be considered.  

 Also, don't forget --- determine if your project has limits.  For example:

• Are you reviewing the literature only within a specific time frame?
• Are you looking at English-language material only?
• Are you considering research from just the United States or worldwide?
• Are there types of material you won't be covering (trade magazines, patents, technical reports, etc.)?  

Take the simple sentence or question that describes what you are looking for.  What are the concepts in the sentence? Are there synonyms that describe the same concept?   If you filled out a PICO chart, concentrate on the  P (problem) and the  I (intervention) for the concept chart.  

Concept Chart:

Concept 1:   _______  OR _______  OR _______  AND Concept 2:   _______   OR   _______  OR   _______  AND Concept 3:  _______  OR  _______  OR   _______ 

  Example:  

I am looking for ways that human factors engineering can improve safety in the nuclear power industry. 

Concept 1:   nuclear power    OR _ nuclear industry _____   AND Concept 2:   _safety___  OR   _accident prevention____   AND Concept 3: _ human factors engineering ___   

What resources you'll use for your literature review depends on what types of materials you want to find.  

• Background Information The more you know about a topic, the better you'll be able to research it.  You'll be familiar with the terminology, understand the underlining science/technology and be aware of the issues in the field. Most importantly, you'll be able to understand what you've retrieved from your search.  But no matter how much you know before hand you'll likely run across terms and concepts with which you're unfamiliar.    Materials such as encyclopedias, dictionaries and handbooks will not only help you learn about the basics of your topic before you begin your search but they'll also help you understand the terminology used in the documents you found from your literature review.    You'll find these types of resources listed on the Dictionaries and Handbooks pages on this guide.
• Books The large size of books (usually 100-500 pages) allows a topic to be studied braodly, covering many different issues.  Conversely, the large size also allows for a specific aspect of the topic to be covered in great detail.  Because of the time it takes to publish, sci-tech books generally do not contain the most current information. To find print and online books from both the ASU Library as well as in other libraries, see the Books page on this guide.
• Conference Papers Scientists and engineers frequently present new findings at conferences before these findings are written up in journal articles or books.  Not every conference, however, publishes it proceedings.  In some cases, conferences publish only a few of the papers presented but not all.   Many resources that help you find journal articles, may also be used to find conference papers, see the Articles page on this guide.
• Journal and Trade Magazine Articles Articles in journals (also called magazines) are short, usually 5-20 pages in length and cover a specific finding, experiment or project.  Articles in scholary journals are usually written by academics or professional scientists/engineers and are aimed at others at the same level.   Articles in trade journals/magazines are written by the journal staff and report on industry news suchs as sales, mergers, prices, etc.   To find journal and trade magazine articles, use the resources listed on the Articles page on this guide. 
• Patents Patents are grants from governments that gives the inventor certain rights of manufacture.  Patents provide a wealth of information for how a technology is being advanced and by which companies.  It is frequently stated that 80% of the information in patents never appears elsewhere in the literature. 
• To identify patents granted in the U.S. and internationally see the " Searching for Patents " guide.
• To see statistical information for U.S. patents by technology class see the US Patent and Trademark's website.
• Technical Reports Technical reports are part of the "gray literature";  gray literature refers to documents that are not published commercially, hence they are difficult to both identify and find.  Technical reports focus on a specific experiment or research project and are meant to convey the results of the experiment or project back to the funding organization.  In the United States, common sources of technical reports are the government agencies that sponsor research projects.  Reports generated within a private corporation and funded soley by that corporation are seldom ever available to anyone outside of the company.      To find technical reports, use the resources listed on the Technical Reports page on this guide.     

Search, Read, Refine and Repeat

Now it's time to apply your search strategy in the resources you've decided to use.

• Use the Advanced Search feature (or whatever search is set up with the 3 lines of boxes) and enter your search strategy just as you recorded in your search strategy chart.  Don't forget to set your limits.   If the resource only provides a single search box, rearrange your chart from vertical into horizontal so that the search statement looks like this:   (Concept#1 OR synonym) AND (Concept#2 OR synonym) AND (Concept#3 OR synonym) Example: (nuclear power OR nuclear industry) AND (safety OR accident prevention) AND (human factors engineering)
• Examine the results to find the most appropriate items.  Keep your one-sentence project description (and/or your PICO chart) in mind to help you stay on track.
• Export the records/citations you want to keep into a citation manager.
• If there are subjects (may also be called subject headings, index terms, descriptors or controlled vocabulary) assigned to each item, make sure that those also transferred into a citation manager.  If not, add them manually.
• Get the full text of the items 
• Read the full text of the items and look at the subjects assigned to the item and consider:
• Do I have to change (narrow) my topic to something more specific because I'm finding way too much? 
• Do I have to change (broaden) my topic because I can't find enough about it? 
• Is there additional terminology for my topic/concepts that I hadn't included in my original search?
• Redo your search strategy according to what you found in step #6 and rerun the search in the resources again.
• You may need to repeat this cycle several times before you are able to identify the best terminology to use in each resource. 

If there will be several months in between when you search the literature and when you turn in the paper, consider setting up alerts and feeds so that you are notified should new items about your topic appear.   How you set up an alert or feed will vary.  In most cases you'll be required to set up a personal account or profile with the journal or database --- there is no charge for this but you will have to identify yourself and provide an email address.  

For instructions on setting up alerts and feeds, see the " Keep Current " page.

• << Previous: Keeping Current
• Next: Resources >>
• Last updated: Jan 2, 2024 8:27 AM
• URL: https://libguides.asu.edu/electricalengineering

The ASU Library acknowledges the twenty-three Native Nations that have inhabited this land for centuries. Arizona State University's four campuses are located in the Salt River Valley on ancestral territories of Indigenous peoples, including the Akimel O’odham (Pima) and Pee Posh (Maricopa) Indian Communities, whose care and keeping of these lands allows us to be here today. ASU Library acknowledges the sovereignty of these nations and seeks to foster an environment of success and possibility for Native American students and patrons. We are advocates for the incorporation of Indigenous knowledge systems and research methodologies within contemporary library practice. ASU Library welcomes members of the Akimel O’odham and Pee Posh, and all Native nations to the Library.

• Princeton University Doctoral Dissertations, 2011-2024

Electrical Engineering

Edinburgh Research Archive

•   ERA Home
• Engineering, School of

Engineering thesis and dissertation collection

By Issue Date Authors Titles Subjects Publication Type Sponsor Supervisors

Search within this Collection:

Recent Submissions

Development and modelling of sustainable polymer–based membranes for gas separation and packaging , holographic single photon lidar for adaptive 3d imaging , operational data mining for offshore wind farm maintenance , dynamics of rigid and soft particles in a cross-slot flow at finite inertia , using machine learning for long-term track bed behaviour analysis and maintenance scheduling optimisation , developing a multi-scale parallelised coupled system for wave-current interactions at regional scales , uav-aided hybrid rf-optical wireless networks , turbulence in real-sea conditions and its impacts on tidal energy devices , investigating the role of mechanical and structural properties of scaffolds for cartilage tissue engineering , additive manufacturing of polyaniline-based electrodes for energy storage and memristive devices , modelling and optimisation of monolithic solid-to-gas heat exchangers , nanostructured metal-organic frameworks with exceptional thermal and hydrothermal stability: synthesis, characterisation and applications in environmental remediation , water tunnel testing of highly-cambered plates and wings for downwind yacht sail applications , impedance-optical dual-modal imaging for tissue engineering , deep learning-enhanced 3d direct time-of-flight imaging , radical innovation for the wave energy sector: an investigation of the potential of direct conversion as an enabling technology , data-driven and machine learning-based approaches for mobile indoor positioning , intelligent ultrasound hand gesture recognition system , techno-economic assessment of solar panel integration onto a wave energy converter , reliable indoor optical wireless communication in the presence of fixed and random blockers .

• Privacy Policy

100+ Electrical Engineering Research Topics Examples

Electrical engineering comprises the comprehension of electricity and how it works. The main task of electrical engineers is to improve the distribution of energy to different electrical devices. Electrical engineers utilize their skills and knowledge to solve different technical issues. Electrical engineers’ tasks are working with the airline navigation system, GPS, systems for power generation, and transmissions like the wind farmhouses and similar projects. Working on different energies also comes in the domain of electrical engineers such as hydro-energy, turbine, fuel cell, gas, geothermal energy, solar energy, and wind energy. Electrical engineers use various passive components such as inductors, capacitors, and resistors, and so on while working on electrical devices and systems.

Students need to get different ideas for the research in electrical engineering on the latest ideas during the academic career of engineering. If you have been looking for an article that includes interesting  research paper topics for electrical engineering  students at a single site, you have come to the right place.

Top Research Topics for Electrical Engineering Students

For your convenience, we have compiled here a list of the top 100 electrical engineering project ideas in 2021.

• Distance Locator for an underground cable fault
• An analysis of battery energy storage (BES) systems financial incentive policies
• Photovoltaic conversion efficiency improvement using the sparse matrix converter
• Multiphase power and DC power transmission
• SVPWM inverter harmonic elimination
• Electric cars Regenerative braking efficiency improvement
• UPS systems issues in power quality
• Techno-environmental feasibility assessment of a standalone photovoltaic system
• Electric Scooter Simulation model
• Load-leveling economical analysis using EV
• Energy minimization algorithm for an electric car with many motors
• Minimization of Switching loss in the grid-connected system
• Economic analysis and a battery’s life analysis with the supercapacitor
• Protection System for an induction motor
• A high-efficiency PLC boiler control system
• SMART cities and IoT
• Electric scooter Performance analysis using different motors
• Semantics, knowledge management, and data acquisition using IoT
• Technologies of Network virtualization
• IoT home networks
• Electrical Appliance Control with Android
• The cost-benefit analysis of energy projects on grid-scale: A case study
• Detection of the arcing fault in the electrical systems
• Induction motor map development for efficiency
• A sensitivity analysis for the parameters vehicle design
• Research on electrical loads in the public and residential buildings
• Comparative Analysis and Calculation Methods of the Losses in the electrical energy in low-voltage devices
• Hybrid charging stations powered with solar energy
• IoT smart energy meter
• Wind-power generation using a synchronous generator with permanent magnet
• Off-grid rural areas applications using a switched reluctance machine
• Analysis and design of a magnetless multiphase dc-field machine to generate wind power
• Smart home electric energy management
• A techno-economic viability assessment of a decoupled energy storage
• A techno-economic optimization and modeling of storage-based PV power generation systems
• A technical model for the lithium-ion storage for biogas and PV energy system
• An analysis of transparent power grids
• Battery life and efficiency of regenerative braking
• Economic and life analysis of a battery with the supercapacitor
• EV home charging using the load-leveling algorithm
• In-Vivo Imaging of the cancer cells using the Fluorescent Microscopy
• Use of Dynamic Instrumentation for analyzing WhatsApp security
• Smart grid architecture design
• Use of PID controller for IM torque control
• Design of a hybrid power system
• Use of FIXCOM for designing a 3-level inverter
• Harvesting solar energy from a solar-powered satellite
• Use of microcontroller for battery discharging and charging of hybrid energy system
• Analysis and modeling of electrical gripper’s DC motor actuator
• Use of a brushless DC motor for Zeta converter’s power quality improvement
• Use of a three-phase Inverter based on Thyristor for simulation and control of a DC motor
• Use of PI Controller for designing a PLC speed control DC motor
• Use of PID controller for speed control of a DC motor: a comparative study
• Front-End ASICs power management circuits
• Off-Grid renewable energy’s remote monitoring system
• Non- Renewable and Renewable Energy Resources comparative analysis
• Development of Green Building for harvesting renewable energy
• Low carbon achievement: a case study
• Use of PSO for load dispatch in case of renewable uncertainties
• The hot climate and Vertical axis wind turbine relationship and consequence
• Use of fuzzy control for efficient electrical energy management
• Degradation in the performance of PV panel performance and shading effect: a case study
• Solar angles simulation to maximize solar thermal collectors efficiency
• Use of Node MCU for active solar tracking
• Different techniques for DC networks with low voltage
• Waste Management Approach based on information
• Grid-Connected Solar PV System with decoupled control
• Electric vehicle life analysis
• Use of ADVISOR for minimizing EV energy consumption
• Field data examination of energy consumption for an electric scooter
• Use of an electric car for peak load shaving
• Effect of the temperature on PV energy conversion
• Digital Signal process control system for motors
• Use of EMTDC/ PSCAD for evaluation of harmonic analysis and filter design
• Load flow analysis of integrated DC/ AC power system using newton-raphson method
• Auto-Irrigation System development using solar power
• DC motor speed control unit design
• Protection System design for under-voltage
• Protection System design for over-voltage
• Silicon robot based on solar power
• 3-phase grid-connected PV systems simulation and design
• Analysis of brushless servo motors
• Grid-connected PV systems multilevel inverter simulation
• MIMO transformer models
• Fault detection in 3 phase transmission lines
• An optimization technique for flexible load scheduling
• Design of remote terminal unit for secure control of power
• Use of the artificial neural network for 3-phase fault detection
• Design of electrical substation earthing system
• Microgrid integration in the power transmission lines
• Induction motor temperature and material selection
• Open-loop simulation for an optimal vehicle simulation and design
• Use of STATCOM for improving the transient stability of a power grid
• Peak load management using Vehicle to Grid system
• Image sensing for a closed-loop traffic control system
• Arduino based smart home automation system
• 3 phase induction motor controlled by SVPWM in an electric vehicle
• Increasing the efficiency of a superconducting transformer
• An analysis of (SCADA) System in Power Stations

Research topics for electrical engineering can be exciting yet challenging to find at the same time as they require a lot of time for thorough research and writing. Moreover, the topic and the desired approach can a lot of time to be finalized. Keeping this hassle in view, we have compiled a list of the top 100  electrical engineering research paper topics  in a single article to save your time. We will also keep updating the list to include some more latest and fresh research topics related to electrical engineering.

Related Posts

Balancing free speech and user safety in the..., the ultimate guide to e-commerce website design, unable to work after an injury, securing fair treatment after workplace injuries, anton kreil – trading masterclass course: an over-review, the legal path: navigating road accident claims with..., these are the best chess openings for black, how to edit an essay well, busted for dui your comprehensive guide to legal..., navigating legal waters: a guide on when to..., 10 comments.

Please example of research proposal Title solar about technology research 1

Solar tittle of research

Help us to connect the latest electrical engineering research topic

Please help to a research project about renewable energy

Your Comment technical report

I want two research papers in electrical engineering.

I will pay for that

Awesome 👍 How do the research topic on DC induction motors

Yes, sure do contact with me.

I want two research paper in electrical engineering

How do Hybrid charging stations powered with solar energy

Leave a Comment Cancel Reply

Please enter an answer in digits: