science research paper introduction

Writing an Introduction for a Scientific Paper

Dr. michelle harris, dr. janet batzli, biocore.

This section provides guidelines on how to construct a solid introduction to a scientific paper including background information, study question , biological rationale, hypothesis , and general approach . If the Introduction is done well, there should be no question in the reader’s mind why and on what basis you have posed a specific hypothesis.

Broad Question : based on an initial observation (e.g., “I see a lot of guppies close to the shore. Do guppies like living in shallow water?”). This observation of the natural world may inspire you to investigate background literature or your observation could be based on previous research by others or your own pilot study. Broad questions are not always included in your written text, but are essential for establishing the direction of your research.

Background Information : key issues, concepts, terminology, and definitions needed to understand the biological rationale for the experiment. It often includes a summary of findings from previous, relevant studies. Remember to cite references, be concise, and only include relevant information given your audience and your experimental design. Concisely summarized background information leads to the identification of specific scientific knowledge gaps that still exist. (e.g., “No studies to date have examined whether guppies do indeed spend more time in shallow water.”)

Testable Question : these questions are much more focused than the initial broad question, are specific to the knowledge gap identified, and can be addressed with data. (e.g., “Do guppies spend different amounts of time in water <1 meter deep as compared to their time in water that is >1 meter deep?”)

Biological Rationale : describes the purpose of your experiment distilling what is known and what is not known that defines the knowledge gap that you are addressing. The “BR” provides the logic for your hypothesis and experimental approach, describing the biological mechanism and assumptions that explain why your hypothesis should be true.

The biological rationale is based on your interpretation of the scientific literature, your personal observations, and the underlying assumptions you are making about how you think the system works. If you have written your biological rationale, your reader should see your hypothesis in your introduction section and say to themselves, “Of course, this hypothesis seems very logical based on the rationale presented.”

• A thorough rationale defines your assumptions about the system that have not been revealed in scientific literature or from previous systematic observation. These assumptions drive the direction of your specific hypothesis or general predictions.
• Defining the rationale is probably the most critical task for a writer, as it tells your reader why your research is biologically meaningful. It may help to think about the rationale as an answer to the questions— how is this investigation related to what we know, what assumptions am I making about what we don’t yet know, AND how will this experiment add to our knowledge? *There may or may not be broader implications for your study; be careful not to overstate these (see note on social justifications below).
• Expect to spend time and mental effort on this. You may have to do considerable digging into the scientific literature to define how your experiment fits into what is already known and why it is relevant to pursue.
• Be open to the possibility that as you work with and think about your data, you may develop a deeper, more accurate understanding of the experimental system. You may find the original rationale needs to be revised to reflect your new, more sophisticated understanding.
• As you progress through Biocore and upper level biology courses, your rationale should become more focused and matched with the level of study e ., cellular, biochemical, or physiological mechanisms that underlie the rationale. Achieving this type of understanding takes effort, but it will lead to better communication of your science.

***Special note on avoiding social justifications: You should not overemphasize the relevance of your experiment and the possible connections to large-scale processes. Be realistic and logical —do not overgeneralize or state grand implications that are not sensible given the structure of your experimental system. Not all science is easily applied to improving the human condition. Performing an investigation just for the sake of adding to our scientific knowledge (“pure or basic science”) is just as important as applied science. In fact, basic science often provides the foundation for applied studies.

Hypothesis / Predictions : specific prediction(s) that you will test during your experiment. For manipulative experiments, the hypothesis should include the independent variable (what you manipulate), the dependent variable(s) (what you measure), the organism or system , the direction of your results, and comparison to be made.

If you are doing a systematic observation , your hypothesis presents a variable or set of variables that you predict are important for helping you characterize the system as a whole, or predict differences between components/areas of the system that help you explain how the system functions or changes over time.

Experimental Approach : Briefly gives the reader a general sense of the experiment, the type of data it will yield, and the kind of conclusions you expect to obtain from the data. Do not confuse the experimental approach with the experimental protocol . The experimental protocol consists of the detailed step-by-step procedures and techniques used during the experiment that are to be reported in the Methods and Materials section.

Some Final Tips on Writing an Introduction

• As you progress through the Biocore sequence, for instance, from organismal level of Biocore 301/302 to the cellular level in Biocore 303/304, we expect the contents of your “Introduction” paragraphs to reflect the level of your coursework and previous writing experience. For example, in Biocore 304 (Cell Biology Lab) biological rationale should draw upon assumptions we are making about cellular and biochemical processes.
• Be Concise yet Specific: Remember to be concise and only include relevant information given your audience and your experimental design. As you write, keep asking, “Is this necessary information or is this irrelevant detail?” For example, if you are writing a paper claiming that a certain compound is a competitive inhibitor to the enzyme alkaline phosphatase and acts by binding to the active site, you need to explain (briefly) Michaelis-Menton kinetics and the meaning and significance of Km and Vmax. This explanation is not necessary if you are reporting the dependence of enzyme activity on pH because you do not need to measure Km and Vmax to get an estimate of enzyme activity.
• Another example: if you are writing a paper reporting an increase in Daphnia magna heart rate upon exposure to caffeine you need not describe the reproductive cycle of magna unless it is germane to your results and discussion. Be specific and concrete, especially when making introductory or summary statements.

Where Do You Discuss Pilot Studies? Many times it is important to do pilot studies to help you get familiar with your experimental system or to improve your experimental design. If your pilot study influences your biological rationale or hypothesis, you need to describe it in your Introduction. If your pilot study simply informs the logistics or techniques, but does not influence your rationale, then the description of your pilot study belongs in the Materials and Methods section.  

How will introductions be evaluated? The following is part of the rubric we will be using to evaluate your papers.

How to Write a Research Paper Introduction (with Examples)

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1 What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

• Present your research topic
• Capture reader interest
• Summarize existing research
• Position your own approach
• Define your specific research problem and problem statement
• Highlight the novelty and contributions of the study
• Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

• Break through writer’s block. Write your research paper introduction with Paperpal Copilot

Table of Contents

What is the introduction for a research paper, why is the introduction important in a research paper, craft a compelling introduction section with paperpal. try now, 1. introduce the research topic:, 2. determine a research niche:, 3. place your research within the research niche:, craft accurate research paper introductions with paperpal. start writing now, frequently asked questions on research paper introduction, key points to remember.

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

• Scope: The topic covered in the research paper
• Context: Background of your topic
• Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

• It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
• It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
• It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
• It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow. It offers an overview of what to expect when reading the main body of your paper.

What are the parts of introduction in the research?

A good research paper introduction section should comprise three main elements: 2

• What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
• What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
• What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address. Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

• Highlight the importance of the research field or topic
• Describe the background of the topic
• Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

• Reveal a gap in existing research or oppose an existing assumption
• Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

• State the purpose of your study
• Highlight the key characteristics of your study
• Describe important results
• Highlight the novelty of the study.
• Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal Copilot is a generative AI-powered academic writing assistant. It’s trained on millions of published scholarly articles and over 20 years of STM experience. Paperpal Copilot helps authors write better and faster with:

• Real-time writing suggestions
• In-depth checks for language and grammar correction
• Paraphrasing to add variety, ensure academic tone, and trim text to meet journal limits

With Paperpal Copilot, create a research paper introduction effortlessly. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

How to use Paperpal to write the Introduction section

Step 1: Sign up on Paperpal and click on the Copilot feature, under this choose Outlines > Research Article > Introduction

Step 2: Add your unstructured notes or initial draft, whether in English or another language, to Paperpal, which is to be used as the base for your content.

Step 3: Fill in the specifics, such as your field of study, brief description or details you want to include, which will help the AI generate the outline for your Introduction.

Step 4: Use this outline and sentence suggestions to develop your content, adding citations where needed and modifying it to align with your specific research focus.

Step 5: Turn to Paperpal’s granular language checks to refine your content, tailor it to reflect your personal writing style, and ensure it effectively conveys your message.

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2 For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3 Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction. Topic introduction: This can include key definitions and a brief history of the topic. Research context and background: Offer the readers some general information and then narrow it down to specific aspects. Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought. Rationale for the study: This establishes the relevance of your study and establishes its importance. Importance of your research: The main contributions are highlighted to help establish the novelty of your study Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through. Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review. A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following: Introduces the topic – Establishes the study’s significance – Provides an overview of the relevant literature – Provides context for the study using literature – Identifies knowledge gaps However, remember to avoid making the following mistakes when writing a research paper introduction: Do not use studies from the literature review to aggressively support your research Avoid direct quoting Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript.

Remember the following key points for writing a good research paper introduction: 4

• Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
• Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
• Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
• Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

1. Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.

2. Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.

3. Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.

4. Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• Scientific Writing Style Guides Explained
• 5 Reasons for Rejection After Peer Review
• Ethical Research Practices For Research with Human Subjects
• 8 Most Effective Ways to Increase Motivation for Thesis Writing 

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives, what is an academic paper types and elements , should you use ai tools like chatgpt for..., publish research papers: 9 steps for successful publications , what are the different types of research papers, how to make translating academic papers less challenging, self-plagiarism in research: what it is and how..., 6 tips for post-doc researchers to take their..., presenting research data effectively through tables and figures.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report

What is a "good" introduction?

Citing sources in the introduction, "introduction checklist" from: how to write a good scientific paper. chris a. mack. spie. 2018..

• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Peer Review
• Presentations
• Lab Report Writing Guides on the Web

This is where you describe briefly and clearly why you are writing the paper. The introduction supplies sufficient background information for the reader to understand and evaluate the experiment you did. It also supplies a rationale for the study.

• Present the problem and the proposed solution
• Presents nature and scope of the problem investigated
• Reviews the pertinent literature to orient the reader
• States the method of the experiment
• State the principle results of the experiment

It is important to cite sources in the introduction section of your paper as evidence of the claims you are making. There are ways of citing sources in the text so that the reader can find the full reference in the literature cited section at the end of the paper, yet the flow of the reading is not badly interrupted. Below are some example of how this can be done:     "Smith (1983) found that N-fixing plants could be infected by several different species of Rhizobium."     "Walnut trees are known to be allelopathic (Smith 1949,  Bond et al. 1955, Jones and Green 1963)."     "Although the presence of Rhizobium normally increases the growth of legumes (Nguyen 1987), the opposite effect has been observed (Washington 1999)." Note that articles by one or two authors are always cited in the text using their last names. However, if there are more than two authors, the last name of the 1st author is given followed by the abbreviation et al. which is Latin for "and others". 

From:  https://writingcenter.gmu.edu/guides/imrad-reports-introductions

• Indicate the field of the work, why this field is important, and what has already been done (with proper citations).
• Indicate a gap, raise a research question, or challenge prior work in this territory.
• Outline the purpose and announce the present research, clearly indicating what is novel and why it is significant.
• Avoid: repeating the abstract; providing unnecessary background information; exaggerating the importance of the work; claiming novelty without a proper literature search. 
• << Previous: ABSTRACT
• Next: METHODS >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

How to Write an Introduction for a Research Paper

Table of Contents

Writing an introduction for a research paper is a critical element of your paper, but it can seem challenging to encapsulate enormous amount of information into a concise form. The introduction of your research paper sets the tone for your research and provides the context for your study. In this article, we will guide you through the process of writing an effective introduction that grabs the reader's attention and captures the essence of your research paper.

Understanding the Purpose of a Research Paper Introduction

The introduction acts as a road map for your research paper, guiding the reader through the main ideas and arguments. The purpose of the introduction is to present your research topic to the readers and provide a rationale for why your study is relevant. It helps the reader locate your research and its relevance in the broader field of related scientific explorations. Additionally, the introduction should inform the reader about the objectives and scope of your study, giving them an overview of what to expect in the paper. By including a comprehensive introduction, you establish your credibility as an author and convince the reader that your research is worth their time and attention.

Key Elements to Include in Your Introduction

When writing your research paper introduction, there are several key elements you should include to ensure it is comprehensive and informative.

• A hook or attention-grabbing statement to capture the reader's interest.  It can be a thought-provoking question, a surprising statistic, or a compelling anecdote that relates to your research topic.
• A brief overview of the research topic and its significance. By highlighting the gap in existing knowledge or the problem your research aims to address, you create a compelling case for the relevance of your study.
• A clear research question or problem statement. This serves as the foundation of your research and guides the reader in understanding the unique focus of your study. It should be concise, specific, and clearly articulated.
• An outline of the paper's structure and main arguments, to help the readers navigate through the paper with ease.

Preparing to Write Your Introduction

Before diving into writing your introduction, it is essential to prepare adequately. This involves 3 important steps:

• Conducting Preliminary Research: Immerse yourself in the existing literature to develop a clear research question and position your study within the academic discourse.
• Identifying Your Thesis Statement: Define a specific, focused, and debatable thesis statement, serving as a roadmap for your paper.
• Considering Broader Context: Reflect on the significance of your research within your field, understanding its potential impact and contribution.

By engaging in these preparatory steps, you can ensure that your introduction is well-informed, focused, and sets the stage for a compelling research paper.

Structuring Your Introduction

Now that you have prepared yourself to tackle the introduction, it's time to structure it effectively. A well-structured introduction will engage the reader from the beginning and provide a logical flow to your research paper.

Starting with a Hook

Begin your introduction with an attention-grabbing hook that captivates the reader's interest. This hook serves as a way to make your introduction more engaging and compelling. For example, if you are writing a research paper on the impact of climate change on biodiversity, you could start your introduction with a statistic about the number of species that have gone extinct due to climate change. This will immediately grab the reader's attention and make them realize the urgency and importance of the topic.

Introducing Your Topic

Provide a brief overview, which should give the reader a general understanding of the subject matter and its significance. Explain the importance of the topic and its relevance to the field. This will help the reader understand why your research is significant and why they should continue reading. Continuing with the example of climate change and biodiversity, you could explain how climate change is one of the greatest threats to global biodiversity, how it affects ecosystems, and the potential consequences for both wildlife and human populations. By providing this context, you are setting the stage for the rest of your research paper and helping the reader understand the importance of your study.

Presenting Your Thesis Statement

The thesis statement should directly address your research question and provide a preview of the main arguments or findings discussed in your paper. Make sure your thesis statement is clear, concise, and well-supported by the evidence you will present in your research paper. By presenting a strong and focused thesis statement, you are providing the reader with the information they could anticipate in your research paper. This will help them understand the purpose and scope of your study and will make them more inclined to continue reading.

Writing Techniques for an Effective Introduction

When crafting an introduction, it is crucial to pay attention to the finer details that can elevate your writing to the next level. By utilizing specific writing techniques, you can captivate your readers and draw them into your research journey.

Using Clear and Concise Language

One of the most important writing techniques to employ in your introduction is the use of clear and concise language. By choosing your words carefully, you can effectively convey your ideas to the reader. It is essential to avoid using jargon or complex terminology that may confuse or alienate your audience. Instead, focus on communicating your research in a straightforward manner to ensure that your introduction is accessible to both experts in your field and those who may be new to the topic. This approach allows you to engage a broader audience and make your research more inclusive.

Establishing the Relevance of Your Research

One way to establish the relevance of your research is by highlighting how it fills a gap in the existing literature. Explain how your study addresses a significant research question that has not been adequately explored. By doing this, you demonstrate that your research is not only unique but also contributes to the broader knowledge in your field. Furthermore, it is important to emphasize the potential impact of your research. Whether it is advancing scientific understanding, informing policy decisions, or improving practical applications, make it clear to the reader how your study can make a difference.

By employing these two writing techniques in your introduction, you can effectively engage your readers. Take your time to craft an introduction that is both informative and captivating, leaving your readers eager to delve deeper into your research.

Revising and Polishing Your Introduction

Once you have written your introduction, it is crucial to revise and polish it to ensure that it effectively sets the stage for your research paper.

Self-Editing Techniques

Review your introduction for clarity, coherence, and logical flow. Ensure each paragraph introduces a new idea or argument with smooth transitions.

Check for grammatical errors, spelling mistakes, and awkward sentence structures.

Ensure that your introduction aligns with the overall tone and style of your research paper.

Seeking Feedback for Improvement

Consider seeking feedback from peers, colleagues, or your instructor. They can provide valuable insights and suggestions for improving your introduction. Be open to constructive criticism and use it to refine your introduction and make it more compelling for the reader.

Writing an introduction for a research paper requires careful thought and planning. By understanding the purpose of the introduction, preparing adequately, structuring effectively, and employing writing techniques, you can create an engaging and informative introduction for your research. Remember to revise and polish your introduction to ensure that it accurately represents the main ideas and arguments in your research paper. With a well-crafted introduction, you will capture the reader's attention and keep them inclined to your paper.

Suggested Reads

ResearchGPT: A Custom GPT for Researchers and Scientists Best Academic Search Engines [2023] How To Humanize AI Text In Scientific Articles Elevate Your Writing Game With AI Grammar Checker Tools

You might also like

Cybersecurity in Higher Education: Safeguarding Students and Faculty Data

How To Write An Argumentative Essay

Beyond Google Scholar: Why SciSpace is the best alternative

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

• View all journals
• Explore content
• About the journal
• Publish with us
• Sign up for alerts
• CAREER BRIEF
• 08 May 2019

Toolkit: How to write a great paper

A clear format will ensure that your research paper is understood by your readers. Follow:

1. Context — your introduction

2. Content — your results

3. Conclusion — your discussion

Plan your paper carefully and decide where each point will sit within the framework before you begin writing.

Collection: Careers toolkit

Straightforward writing

Scientific writing should always aim to be A, B and C: Accurate, Brief, and Clear. Never choose a long word when a short one will do. Use simple language to communicate your results. Always aim to distill your message down into the simplest sentence possible.

Choose a title

A carefully conceived title will communicate the single core message of your research paper. It should be D, E, F: Declarative, Engaging and Focused.

Conclusions

Add a sentence or two at the end of your concluding statement that sets out your plans for further research. What is next for you or others working in your field?

Find out more

See additional information .

doi: https://doi.org/10.1038/d41586-019-01362-9

Related Articles

How to get published in high impact journals

So you’re writing a paper

Writing for a Nature journal

Overcoming low vision to prove my abilities under pressure

Career Q&A 28 MAR 24

How a spreadsheet helped me to land my dream job

Career Column 28 MAR 24

Maple-scented cacti and pom-pom cats: how pranking at work can lift lab spirits

Career Feature 27 MAR 24

Tenure-track Assistant Professor in Ecological and Evolutionary Modeling

Tenure-track Assistant Professor in Ecosystem Ecology linked to IceLab’s Center for modeling adaptive mechanisms in living systems under stress

Umeå, Sweden

Umeå University

Faculty Positions in Westlake University

Founded in 2018, Westlake University is a new type of non-profit research-oriented university in Hangzhou, China, supported by public a...

Hangzhou, Zhejiang, China

Westlake University

Postdoctoral Fellowships-Metabolic control of cell growth and senescence

Postdoctoral positions in the team Cell growth control by nutrients at Inst. Necker, Université Paris Cité, Inserm, Paris, France.

Paris, Ile-de-France (FR)

Inserm DR IDF Paris Centre Nord

Zhejiang Provincial Hospital of Chinese Medicine on Open Recruitment of Medical Talents and Postdocs

Director of Clinical Department, Professor, Researcher, Post-doctor

The First Affiliated Hospital of Zhejiang Chinese Medical University

Sir Run Run Shaw Hospital, School of Medicine, Zhejiang University, Warmly Welcomes Talents Abroad

“Qiushi” Distinguished Scholar, Zhejiang University, including Professor and Physician

No. 3, Qingchun East Road, Hangzhou, Zhejiang (CN)

Sir Run Run Shaw Hospital Affiliated with Zhejiang University School of Medicine

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Quick links

• Explore articles by subject
• Guide to authors
• Editorial policies

Join thousands of product people at Insight Out Conf on April 11. Register free.

Insights hub solutions

Analyze data

Uncover deep customer insights with fast, powerful features, store insights, curate and manage insights in one searchable platform, scale research, unlock the potential of customer insights at enterprise scale.

Featured reads

Inspiration

Three things to look forward to at Insight Out

Tips and tricks

Make magic with your customer data in Dovetail

Four ways Dovetail helps Product Managers master continuous product discovery

Events and videos

© Dovetail Research Pty. Ltd.

How to write an effective introduction for your research paper

Last updated

20 January 2024

Reviewed by

However, the introduction is a vital element of your research paper. It helps the reader decide whether your paper is worth their time. As such, it's worth taking your time to get it right.

In this article, we'll tell you everything you need to know about writing an effective introduction for your research paper.

• The importance of an introduction in research papers

The primary purpose of an introduction is to provide an overview of your paper. This lets readers gauge whether they want to continue reading or not. The introduction should provide a meaningful roadmap of your research to help them make this decision. It should let readers know whether the information they're interested in is likely to be found in the pages that follow.

Aside from providing readers with information about the content of your paper, the introduction also sets the tone. It shows readers the style of language they can expect, which can further help them to decide how far to read.

When you take into account both of these roles that an introduction plays, it becomes clear that crafting an engaging introduction is the best way to get your paper read more widely. First impressions count, and the introduction provides that impression to readers.

• The optimum length for a research paper introduction

While there's no magic formula to determine exactly how long a research paper introduction should be, there are a few guidelines. Some variables that impact the ideal introduction length include:

Field of study

Complexity of the topic

Specific requirements of the course or publication

A commonly recommended length of a research paper introduction is around 10% of the total paper’s length. So, a ten-page paper has a one-page introduction. If the topic is complex, it may require more background to craft a compelling intro. Humanities papers tend to have longer introductions than those of the hard sciences.

The best way to craft an introduction of the right length is to focus on clarity and conciseness. Tell the reader only what is necessary to set up your research. An introduction edited down with this goal in mind should end up at an acceptable length.

• Evaluating successful research paper introductions

A good way to gauge how to create a great introduction is by looking at examples from across your field. The most influential and well-regarded papers should provide some insights into what makes a good introduction.

Dissecting examples: what works and why

We can make some general assumptions by looking at common elements of a good introduction, regardless of the field of research.

A common structure is to start with a broad context, and then narrow that down to specific research questions or hypotheses. This creates a funnel that establishes the scope and relevance.

The most effective introductions are careful about the assumptions they make regarding reader knowledge. By clearly defining key terms and concepts instead of assuming the reader is familiar with them, these introductions set a more solid foundation for understanding.

To pull in the reader and make that all-important good first impression, excellent research paper introductions will often incorporate a compelling narrative or some striking fact that grabs the reader's attention.

Finally, good introductions provide clear citations from past research to back up the claims they're making. In the case of argumentative papers or essays (those that take a stance on a topic or issue), a strong thesis statement compels the reader to continue reading.

Common pitfalls to avoid in research paper introductions

You can also learn what not to do by looking at other research papers. Many authors have made mistakes you can learn from.

We've talked about the need to be clear and concise. Many introductions fail at this; they're verbose, vague, or otherwise fail to convey the research problem or hypothesis efficiently. This often comes in the form of an overemphasis on background information, which obscures the main research focus.

Ensure your introduction provides the proper emphasis and excitement around your research and its significance. Otherwise, fewer people will want to read more about it.

• Crafting a compelling introduction for a research paper

Let’s take a look at the steps required to craft an introduction that pulls readers in and compels them to learn more about your research.

Step 1: Capturing interest and setting the scene

To capture the reader's interest immediately, begin your introduction with a compelling question, a surprising fact, a provocative quote, or some other mechanism that will hook readers and pull them further into the paper.

As they continue reading, the introduction should contextualize your research within the current field, showing readers its relevance and importance. Clarify any essential terms that will help them better understand what you're saying. This keeps the fundamentals of your research accessible to all readers from all backgrounds.

Step 2: Building a solid foundation with background information

Including background information in your introduction serves two major purposes:

It helps to clarify the topic for the reader

It establishes the depth of your research

The approach you take when conveying this information depends on the type of paper.

For argumentative papers, you'll want to develop engaging background narratives. These should provide context for the argument you'll be presenting.

For empirical papers, highlighting past research is the key. Often, there will be some questions that weren't answered in those past papers. If your paper is focused on those areas, those papers make ideal candidates for you to discuss and critique in your introduction.

Step 3: Pinpointing the research challenge

To capture the attention of the reader, you need to explain what research challenges you'll be discussing.

For argumentative papers, this involves articulating why the argument you'll be making is important. What is its relevance to current discussions or problems? What is the potential impact of people accepting or rejecting your argument?

For empirical papers, explain how your research is addressing a gap in existing knowledge. What new insights or contributions will your research bring to your field?

Step 4: Clarifying your research aims and objectives

We mentioned earlier that the introduction to a research paper can serve as a roadmap for what's within. We've also frequently discussed the need for clarity. This step addresses both of these.

When writing an argumentative paper, craft a thesis statement with impact. Clearly articulate what your position is and the main points you intend to present. This will map out for the reader exactly what they'll get from reading the rest.

For empirical papers, focus on formulating precise research questions and hypotheses. Directly link them to the gaps or issues you've identified in existing research to show the reader the precise direction your research paper will take.

Step 5: Sketching the blueprint of your study

Continue building a roadmap for your readers by designing a structured outline for the paper. Guide the reader through your research journey, explaining what the different sections will contain and their relationship to one another.

This outline should flow seamlessly as you move from section to section. Creating this outline early can also help guide the creation of the paper itself, resulting in a final product that's better organized. In doing so, you'll craft a paper where each section flows intuitively from the next.

Step 6: Integrating your research question

To avoid letting your research question get lost in background information or clarifications, craft your introduction in such a way that the research question resonates throughout. The research question should clearly address a gap in existing knowledge or offer a new perspective on an existing problem.

Tell users your research question explicitly but also remember to frequently come back to it. When providing context or clarification, point out how it relates to the research question. This keeps your focus where it needs to be and prevents the topic of the paper from becoming under-emphasized.

Step 7: Establishing the scope and limitations

So far, we've talked mostly about what's in the paper and how to convey that information to readers. The opposite is also important. Information that's outside the scope of your paper should be made clear to the reader in the introduction so their expectations for what is to follow are set appropriately.

Similarly, be honest and upfront about the limitations of the study. Any constraints in methodology, data, or how far your findings can be generalized should be fully communicated in the introduction.

Step 8: Concluding the introduction with a promise

The final few lines of the introduction are your last chance to convince people to continue reading the rest of the paper. Here is where you should make it very clear what benefit they'll get from doing so. What topics will be covered? What questions will be answered? Make it clear what they will get for continuing.

By providing a quick recap of the key points contained in the introduction in its final lines and properly setting the stage for what follows in the rest of the paper, you refocus the reader's attention on the topic of your research and guide them to read more.

• Research paper introduction best practices

Following the steps above will give you a compelling introduction that hits on all the key points an introduction should have. Some more tips and tricks can make an introduction even more polished.

As you follow the steps above, keep the following tips in mind.

Set the right tone and style

Like every piece of writing, a research paper should be written for the audience. That is to say, it should match the tone and style that your academic discipline and target audience expect. This is typically a formal and academic tone, though the degree of formality varies by field.

Kno w the audience

The perfect introduction balances clarity with conciseness. The amount of clarification required for a given topic depends greatly on the target audience. Knowing who will be reading your paper will guide you in determining how much background information is required.

Adopt the CARS (create a research space) model

The CARS model is a helpful tool for structuring introductions. This structure has three parts. The beginning of the introduction establishes the general research area. Next, relevant literature is reviewed and critiqued. The final section outlines the purpose of your study as it relates to the previous parts.

Master the art of funneling

The CARS method is one example of a well-funneled introduction. These start broadly and then slowly narrow down to your specific research problem. It provides a nice narrative flow that provides the right information at the right time. If you stray from the CARS model, try to retain this same type of funneling.

Incorporate narrative element

People read research papers largely to be informed. But to inform the reader, you have to hold their attention. A narrative style, particularly in the introduction, is a great way to do that. This can be a compelling story, an intriguing question, or a description of a real-world problem.

Write the introduction last

By writing the introduction after the rest of the paper, you'll have a better idea of what your research entails and how the paper is structured. This prevents the common problem of writing something in the introduction and then forgetting to include it in the paper. It also means anything particularly exciting in the paper isn’t neglected in the intro.

Get started today

Go from raw data to valuable insights with a flexible research platform

Editor’s picks

Last updated: 21 December 2023

Last updated: 16 December 2023

Last updated: 17 February 2024

Last updated: 19 November 2023

Last updated: 5 March 2024

Last updated: 15 February 2024

Last updated: 11 March 2024

Last updated: 12 December 2023

Last updated: 6 March 2024

Last updated: 10 April 2023

Last updated: 20 December 2023

Latest articles

Related topics, log in or sign up.

Get started for free

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• This Or That Game New
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• College University and Postgraduate
• Academic Writing
• Research Papers

How to Write a Research Introduction

Last Updated: December 6, 2023 Fact Checked

This article was co-authored by Megan Morgan, PhD . Megan Morgan is a Graduate Program Academic Advisor in the School of Public & International Affairs at the University of Georgia. She earned her PhD in English from the University of Georgia in 2015. There are 7 references cited in this article, which can be found at the bottom of the page. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 2,650,568 times.

The introduction to a research paper can be the most challenging part of the paper to write. The length of the introduction will vary depending on the type of research paper you are writing. An introduction should announce your topic, provide context and a rationale for your work, before stating your research questions and hypothesis. Well-written introductions set the tone for the paper, catch the reader's interest, and communicate the hypothesis or thesis statement.

Introducing the Topic of the Paper

• In scientific papers this is sometimes known as an "inverted triangle", where you start with the broadest material at the start, before zooming in on the specifics. [2] X Research source
• The sentence "Throughout the 20th century, our views of life on other planets have drastically changed" introduces a topic, but does so in broad terms.
• It provides the reader with an indication of the content of the essay and encourages them to read on.

• For example, if you were writing a paper about the behaviour of mice when exposed to a particular substance, you would include the word "mice", and the scientific name of the relevant compound in the first sentences.
• If you were writing a history paper about the impact of the First World War on gender relations in Britain, you should mention those key words in your first few lines.

• This is especially important if you are attempting to develop a new conceptualization that uses language and terminology your readers may be unfamiliar with.

• If you use an anecdote ensure that is short and highly relevant for your research. It has to function in the same way as an alternative opening, namely to announce the topic of your research paper to your reader.
• For example, if you were writing a sociology paper about re-offending rates among young offenders, you could include a brief story of one person whose story reflects and introduces your topic.
• This kind of approach is generally not appropriate for the introduction to a natural or physical sciences research paper where the writing conventions are different.

Establishing the Context for Your Paper

• It is important to be concise in the introduction, so provide an overview on recent developments in the primary research rather than a lengthy discussion.
• You can follow the "inverted triangle" principle to focus in from the broader themes to those to which you are making a direct contribution with your paper.
• A strong literature review presents important background information to your own research and indicates the importance of the field.

• By making clear reference to existing work you can demonstrate explicitly the specific contribution you are making to move the field forward.
• You can identify a gap in the existing scholarship and explain how you are addressing it and moving understanding forward.

• For example, if you are writing a scientific paper you could stress the merits of the experimental approach or models you have used.
• Stress what is novel in your research and the significance of your new approach, but don't give too much detail in the introduction.
• A stated rationale could be something like: "the study evaluates the previously unknown anti-inflammatory effects of a topical compound in order to evaluate its potential clinical uses".

Specifying Your Research Questions and Hypothesis

• The research question or questions generally come towards the end of the introduction, and should be concise and closely focused.
• The research question might recall some of the key words established in the first few sentences and the title of your paper.
• An example of a research question could be "what were the consequences of the North American Free Trade Agreement on the Mexican export economy?"
• This could be honed further to be specific by referring to a particular element of the Free Trade Agreement and the impact on a particular industry in Mexico, such as clothing manufacture.
• A good research question should shape a problem into a testable hypothesis.

• If possible try to avoid using the word "hypothesis" and rather make this implicit in your writing. This can make your writing appear less formulaic.
• In a scientific paper, giving a clear one-sentence overview of your results and their relation to your hypothesis makes the information clear and accessible. [10] X Trustworthy Source PubMed Central Journal archive from the U.S. National Institutes of Health Go to source
• An example of a hypothesis could be "mice deprived of food for the duration of the study were expected to become more lethargic than those fed normally".

• This is not always necessary and you should pay attention to the writing conventions in your discipline.
• In a natural sciences paper, for example, there is a fairly rigid structure which you will be following.
• A humanities or social science paper will most likely present more opportunities to deviate in how you structure your paper.

Research Introduction Help

Community Q&A

• Use your research papers' outline to help you decide what information to include when writing an introduction. Thanks Helpful 0 Not Helpful 1
• Consider drafting your introduction after you have already completed the rest of your research paper. Writing introductions last can help ensure that you don't leave out any major points. Thanks Helpful 0 Not Helpful 0

• Avoid emotional or sensational introductions; these can create distrust in the reader. Thanks Helpful 50 Not Helpful 12
• Generally avoid using personal pronouns in your introduction, such as "I," "me," "we," "us," "my," "mine," or "our." Thanks Helpful 31 Not Helpful 7
• Don't overwhelm the reader with an over-abundance of information. Keep the introduction as concise as possible by saving specific details for the body of your paper. Thanks Helpful 24 Not Helpful 14

You Might Also Like

• ↑ https://library.sacredheart.edu/c.php?g=29803&p=185916
• ↑ https://www.aresearchguide.com/inverted-pyramid-structure-in-writing.html
• ↑ https://libguides.usc.edu/writingguide/introduction
• ↑ https://writing.wisc.edu/Handbook/PlanResearchPaper.html
• ↑ https://dept.writing.wisc.edu/wac/writing-an-introduction-for-a-scientific-paper/
• ↑ https://writing.wisc.edu/handbook/assignments/planresearchpaper/
• ↑ http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3178846/

About This Article

To introduce your research paper, use the first 1-2 sentences to describe your general topic, such as “women in World War I.” Include and define keywords, such as “gender relations,” to show your reader where you’re going. Mention previous research into the topic with a phrase like, “Others have studied…”, then transition into what your contribution will be and why it’s necessary. Finally, state the questions that your paper will address and propose your “answer” to them as your thesis statement. For more information from our English Ph.D. co-author about how to craft a strong hypothesis and thesis, keep reading! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Abdulrahman Omar

Oct 5, 2018

Did this article help you?

May 9, 2021

Lavanya Gopakumar

Oct 1, 2016

Dengkai Zhang

May 14, 2018

Leslie Mae Cansana

Sep 22, 2016

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

Get all the best how-tos!

Sign up for wikiHow's weekly email newsletter

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 4. The Introduction
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

The introduction leads the reader from a general subject area to a particular topic of inquiry. It establishes the scope, context, and significance of the research being conducted by summarizing current understanding and background information about the topic, stating the purpose of the work in the form of the research problem supported by a hypothesis or a set of questions, explaining briefly the methodological approach used to examine the research problem, highlighting the potential outcomes your study can reveal, and outlining the remaining structure and organization of the paper.

Key Elements of the Research Proposal. Prepared under the direction of the Superintendent and by the 2010 Curriculum Design and Writing Team. Baltimore County Public Schools.

Importance of a Good Introduction

Think of the introduction as a mental road map that must answer for the reader these four questions:

• What was I studying?
• Why was this topic important to investigate?
• What did we know about this topic before I did this study?
• How will this study advance new knowledge or new ways of understanding?

According to Reyes, there are three overarching goals of a good introduction: 1) ensure that you summarize prior studies about the topic in a manner that lays a foundation for understanding the research problem; 2) explain how your study specifically addresses gaps in the literature, insufficient consideration of the topic, or other deficiency in the literature; and, 3) note the broader theoretical, empirical, and/or policy contributions and implications of your research.

A well-written introduction is important because, quite simply, you never get a second chance to make a good first impression. The opening paragraphs of your paper will provide your readers with their initial impressions about the logic of your argument, your writing style, the overall quality of your research, and, ultimately, the validity of your findings and conclusions. A vague, disorganized, or error-filled introduction will create a negative impression, whereas, a concise, engaging, and well-written introduction will lead your readers to think highly of your analytical skills, your writing style, and your research approach. All introductions should conclude with a brief paragraph that describes the organization of the rest of the paper.

Hirano, Eliana. “Research Article Introductions in English for Specific Purposes: A Comparison between Brazilian, Portuguese, and English.” English for Specific Purposes 28 (October 2009): 240-250; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide. Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Reyes, Victoria. Demystifying the Journal Article. Inside Higher Education.

Structure and Writing Style

I.  Structure and Approach

The introduction is the broad beginning of the paper that answers three important questions for the reader:

• What is this?
• Why should I read it?
• What do you want me to think about / consider doing / react to?

Think of the structure of the introduction as an inverted triangle of information that lays a foundation for understanding the research problem. Organize the information so as to present the more general aspects of the topic early in the introduction, then narrow your analysis to more specific topical information that provides context, finally arriving at your research problem and the rationale for studying it [often written as a series of key questions to be addressed or framed as a hypothesis or set of assumptions to be tested] and, whenever possible, a description of the potential outcomes your study can reveal.

These are general phases associated with writing an introduction: 1.  Establish an area to research by:

• Highlighting the importance of the topic, and/or
• Making general statements about the topic, and/or
• Presenting an overview on current research on the subject.

2.  Identify a research niche by:

• Opposing an existing assumption, and/or
• Revealing a gap in existing research, and/or
• Formulating a research question or problem, and/or
• Continuing a disciplinary tradition.

3.  Place your research within the research niche by:

• Stating the intent of your study,
• Outlining the key characteristics of your study,
• Describing important results, and
• Giving a brief overview of the structure of the paper.

NOTE:   It is often useful to review the introduction late in the writing process. This is appropriate because outcomes are unknown until you've completed the study. After you complete writing the body of the paper, go back and review introductory descriptions of the structure of the paper, the method of data gathering, the reporting and analysis of results, and the conclusion. Reviewing and, if necessary, rewriting the introduction ensures that it correctly matches the overall structure of your final paper.

II.  Delimitations of the Study

Delimitations refer to those characteristics that limit the scope and define the conceptual boundaries of your research . This is determined by the conscious exclusionary and inclusionary decisions you make about how to investigate the research problem. In other words, not only should you tell the reader what it is you are studying and why, but you must also acknowledge why you rejected alternative approaches that could have been used to examine the topic.

Obviously, the first limiting step was the choice of research problem itself. However, implicit are other, related problems that could have been chosen but were rejected. These should be noted in the conclusion of your introduction. For example, a delimitating statement could read, "Although many factors can be understood to impact the likelihood young people will vote, this study will focus on socioeconomic factors related to the need to work full-time while in school." The point is not to document every possible delimiting factor, but to highlight why previously researched issues related to the topic were not addressed.

Examples of delimitating choices would be:

• The key aims and objectives of your study,
• The research questions that you address,
• The variables of interest [i.e., the various factors and features of the phenomenon being studied],
• The method(s) of investigation,
• The time period your study covers, and
• Any relevant alternative theoretical frameworks that could have been adopted.

Review each of these decisions. Not only do you clearly establish what you intend to accomplish in your research, but you should also include a declaration of what the study does not intend to cover. In the latter case, your exclusionary decisions should be based upon criteria understood as, "not interesting"; "not directly relevant"; “too problematic because..."; "not feasible," and the like. Make this reasoning explicit!

NOTE:   Delimitations refer to the initial choices made about the broader, overall design of your study and should not be confused with documenting the limitations of your study discovered after the research has been completed.

ANOTHER NOTE : Do not view delimitating statements as admitting to an inherent failing or shortcoming in your research. They are an accepted element of academic writing intended to keep the reader focused on the research problem by explicitly defining the conceptual boundaries and scope of your study. It addresses any critical questions in the reader's mind of, "Why the hell didn't the author examine this?"

III.  The Narrative Flow

Issues to keep in mind that will help the narrative flow in your introduction :

• Your introduction should clearly identify the subject area of interest . A simple strategy to follow is to use key words from your title in the first few sentences of the introduction. This will help focus the introduction on the topic at the appropriate level and ensures that you get to the subject matter quickly without losing focus, or discussing information that is too general.
• Establish context by providing a brief and balanced review of the pertinent published literature that is available on the subject. The key is to summarize for the reader what is known about the specific research problem before you did your analysis. This part of your introduction should not represent a comprehensive literature review--that comes next. It consists of a general review of the important, foundational research literature [with citations] that establishes a foundation for understanding key elements of the research problem. See the drop-down menu under this tab for " Background Information " regarding types of contexts.
• Clearly state the hypothesis that you investigated . When you are first learning to write in this format it is okay, and actually preferable, to use a past statement like, "The purpose of this study was to...." or "We investigated three possible mechanisms to explain the...."
• Why did you choose this kind of research study or design? Provide a clear statement of the rationale for your approach to the problem studied. This will usually follow your statement of purpose in the last paragraph of the introduction.

IV.  Engaging the Reader

A research problem in the social sciences can come across as dry and uninteresting to anyone unfamiliar with the topic . Therefore, one of the goals of your introduction is to make readers want to read your paper. Here are several strategies you can use to grab the reader's attention:

• Open with a compelling story . Almost all research problems in the social sciences, no matter how obscure or esoteric , are really about the lives of people. Telling a story that humanizes an issue can help illuminate the significance of the problem and help the reader empathize with those affected by the condition being studied.
• Include a strong quotation or a vivid, perhaps unexpected, anecdote . During your review of the literature, make note of any quotes or anecdotes that grab your attention because they can used in your introduction to highlight the research problem in a captivating way.
• Pose a provocative or thought-provoking question . Your research problem should be framed by a set of questions to be addressed or hypotheses to be tested. However, a provocative question can be presented in the beginning of your introduction that challenges an existing assumption or compels the reader to consider an alternative viewpoint that helps establish the significance of your study. 
• Describe a puzzling scenario or incongruity . This involves highlighting an interesting quandary concerning the research problem or describing contradictory findings from prior studies about a topic. Posing what is essentially an unresolved intellectual riddle about the problem can engage the reader's interest in the study.
• Cite a stirring example or case study that illustrates why the research problem is important . Draw upon the findings of others to demonstrate the significance of the problem and to describe how your study builds upon or offers alternatives ways of investigating this prior research.

NOTE:   It is important that you choose only one of the suggested strategies for engaging your readers. This avoids giving an impression that your paper is more flash than substance and does not distract from the substance of your study.

Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. University College Writing Centre. University of Toronto; Introduction. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Introductions. The Writing Center. University of North Carolina; Introductions. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Introductions, Body Paragraphs, and Conclusions for an Argument Paper. The Writing Lab and The OWL. Purdue University; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Resources for Writers: Introduction Strategies. Program in Writing and Humanistic Studies. Massachusetts Institute of Technology; Sharpling, Gerald. Writing an Introduction. Centre for Applied Linguistics, University of Warwick; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Swales, John and Christine B. Feak. Academic Writing for Graduate Students: Essential Skills and Tasks . 2nd edition. Ann Arbor, MI: University of Michigan Press, 2004 ; Writing Your Introduction. Department of English Writing Guide. George Mason University.

Writing Tip

Avoid the "Dictionary" Introduction

Giving the dictionary definition of words related to the research problem may appear appropriate because it is important to define specific terminology that readers may be unfamiliar with. However, anyone can look a word up in the dictionary and a general dictionary is not a particularly authoritative source because it doesn't take into account the context of your topic and doesn't offer particularly detailed information. Also, placed in the context of a particular discipline, a term or concept may have a different meaning than what is found in a general dictionary. If you feel that you must seek out an authoritative definition, use a subject specific dictionary or encyclopedia [e.g., if you are a sociology student, search for dictionaries of sociology]. A good database for obtaining definitive definitions of concepts or terms is Credo Reference .

Saba, Robert. The College Research Paper. Florida International University; Introductions. The Writing Center. University of North Carolina.

Another Writing Tip

When Do I Begin?

A common question asked at the start of any paper is, "Where should I begin?" An equally important question to ask yourself is, "When do I begin?" Research problems in the social sciences rarely rest in isolation from history. Therefore, it is important to lay a foundation for understanding the historical context underpinning the research problem. However, this information should be brief and succinct and begin at a point in time that illustrates the study's overall importance. For example, a study that investigates coffee cultivation and export in West Africa as a key stimulus for local economic growth needs to describe the beginning of exporting coffee in the region and establishing why economic growth is important. You do not need to give a long historical explanation about coffee exports in Africa. If a research problem requires a substantial exploration of the historical context, do this in the literature review section. In your introduction, make note of this as part of the "roadmap" [see below] that you use to describe the organization of your paper.

Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70.

Yet Another Writing Tip

Always End with a Roadmap

The final paragraph or sentences of your introduction should forecast your main arguments and conclusions and provide a brief description of the rest of the paper [the "roadmap"] that let's the reader know where you are going and what to expect. A roadmap is important because it helps the reader place the research problem within the context of their own perspectives about the topic. In addition, concluding your introduction with an explicit roadmap tells the reader that you have a clear understanding of the structural purpose of your paper. In this way, the roadmap acts as a type of promise to yourself and to your readers that you will follow a consistent and coherent approach to addressing the topic of inquiry. Refer to it often to help keep your writing focused and organized.

Cassuto, Leonard. “On the Dissertation: How to Write the Introduction.” The Chronicle of Higher Education , May 28, 2018; Radich, Michael. A Student's Guide to Writing in East Asian Studies . (Cambridge, MA: Harvard University Writing n. d.), pp. 35-37.

• << Previous: Executive Summary
• Next: The C.A.R.S. Model >>
• Last Updated: Mar 26, 2024 10:40 AM
• URL: https://libguides.usc.edu/writingguide

• Research Guides

BSCI 1510L Literature and Stats Guide: 3.2 Components of a scientific paper

• 1 What is a scientific paper?
• 2 Referencing and accessing papers
• 2.1 Literature Cited
• 2.2 Accessing Scientific Papers
• 2.3 Traversing the web of citations
• 2.4 Keyword Searches
• 3 Style of scientific writing
• 3.1 Specific details regarding scientific writing

3.2 Components of a scientific paper

• 4 For further information
• Appendix A: Calculation Final Concentrations
• 1 Formulas in Excel
• 2 Basic operations in Excel
• 3 Measurement and Variation
• 3.1 Describing Quantities and Their Variation
• 3.2 Samples Versus Populations
• 3.3 Calculating Descriptive Statistics using Excel
• 4 Variation and differences
• 5 Differences in Experimental Science
• 5.1 Aside: Commuting to Nashville
• 5.2 P and Detecting Differences in Variable Quantities
• 5.3 Statistical significance
• 5.4 A test for differences of sample means: 95% Confidence Intervals
• 5.5 Error bars in figures
• 5.6 Discussing statistics in your scientific writing
• 6 Scatter plot, trendline, and linear regression
• 7 The t-test of Means
• 8 Paired t-test
• 9 Two-Tailed and One-Tailed Tests
• 10 Variation on t-tests: ANOVA
• 11 Reporting the Results of a Statistical Test
• 12 Summary of statistical tests
• 1 Objectives
• 2 Project timeline
• 3 Background
• 4 Previous work in the BSCI 111 class
• 5 General notes about the project
• 6 About the paper
• 7 References

Nearly all journal articles are divided into the following major sections: abstract, introduction, methods, results, discussion, and references.  Usually the sections are labeled as such, although often the introduction (and sometimes the abstract) is not labeled.  Sometimes alternative section titles are used.  The abstract is sometimes called the "summary", the methods are sometimes called "materials and methods", and the discussion is sometimes called "conclusions".   Some journals also include the minor sections of "key words" following the abstract, and "acknowledgments" following the discussion.  In some journals, the sections may be divided into subsections that are given descriptive titles.  However, the general division into the six major sections is nearly universal.

3.2.1 Abstract

The abstract is a short summary (150-200 words or less) of the important points of the paper.  It does not generally include background information.  There may be a very brief statement of the rationale for conducting the study.  It describes what was done, but without details.  It also describes the results in a summarized way that usually includes whether or not the statistical tests were significant.  It usually concludes with a brief statement of the importance of the results.  Abstracts do not include references.  When writing a paper, the abstract is always the last part to be written.

The purpose of the abstract is to allow potential readers of a paper to find out the important points of the paper without having to actually read the paper.  It should be a self-contained unit capable of being understood without the benefit of the text of the article . It essentially serves as an "advertisement" for the paper that readers use to determine whether or not they actually want to wade through the entire paper or not.  Abstracts are generally freely available in electronic form and are often presented in the results of an electronic search.  If searchers do not have electronic access to the journal in which the article is published, the abstract is the only means that they have to decide whether to go through the effort (going to the library to look up the paper journal, requesting a reprint from the author, buying a copy of the article from a service, requesting the article by Interlibrary Loan) of acquiring the article.  Therefore it is important that the abstract accurately and succinctly presents the most important information in the article.

3.2.2 Introduction

The introduction provides the background information necessary to understand why the described experiment was conducted.  The introduction should describe previous research on the topic that has led to the unanswered questions being addressed by the experiment and should cite important previous papers that form the background for the experiment.  The introduction should also state in an organized fashion the goals of the research, i.e. the particular, specific questions that will be tested in the experiments.  There should be a one-to-one correspondence between questions raised in the introduction and points discussed in the conclusion section of the paper.  In other words, do not raise questions in the introduction unless you are going to have some kind of answer to the question that you intend to discuss at the end of the paper. 

You may have been told that every paper must have a hypothesis that can be clearly stated.  That is often true, but not always.  If your experiment involves a manipulation which tests a specific hypothesis, then you should clearly state that hypothesis.  On the other hand, if your experiment was primarily exploratory, descriptive, or measurative, then you probably did not have an a priori hypothesis, so don't pretend that you did and make one up.  (See the discussion in the introduction to Experiment 4 for more on this.)  If you state a hypothesis in the introduction, it should be a general hypothesis and not a null or alternative hypothesis for a statistical test.  If it is necessary to explain how a statistical test will help you evaluate your general hypothesis, explain that in the methods section. 

A good introduction should be fairly heavy with citations.  This indicates to the reader that the authors are informed about previous work on the topic and are not working in a vacuum.  Citations also provide jumping-off points to allow the reader to explore other tangents to the subject that are not directly addressed in the paper.  If the paper supports or refutes previous work, readers can look up the citations and make a comparison for themselves. 

"Do not get lost in reviewing background information. Remember that the Introduction is meant to introduce the reader to your research, not summarize and evaluate all past literature on the subject (which is the purpose of a review paper). Many of the other studies you may be tempted to discuss in your Introduction are better saved for the Discussion, where they become a powerful tool for comparing and interpreting your results. Include only enough background information to allow your reader to understand why you are asking the questions you are and why your hyptheses are reasonable ones. Often, a brief explanation of the theory involved is sufficient. …

Write this section in the past or present tense, never in the future. " (Steingraber et al. 1985)

3.2.3 Methods (taken verbatim from Steingraber et al. 1985)

The function of this section is to describe all experimental procedures, including controls. The description should be complete enough to enable someone else to repeat your work. If there is more than one part to the experiment, it is a good idea to describe your methods and present your results in the same order in each section. This may not be the same order in which the experiments were performed -it is up to you to decide what order of presentation will make the most sense to your reader.

1. Explain why each procedure was done, i.e., what variable were you measuring and why? Example:

Difficult to understand : First, I removed the frog muscle and then I poured Ringer’s solution on it. Next, I attached it to the kymograph.

Improved: I removed the frog muscle and poured Ringer’s solution on it to prevent it from drying out. I then attached the muscle to the kymograph in order to determine the minimum voltage required for contraction.

2. Experimental procedures and results are narrated in the past tense (what you did, what you found, etc.) whereas conclusions from your results are given in the present tense.

3. Mathematical equations and statistical tests are considered mathematical methods and should be described in this section along with the actual experimental work.

4. Use active rather than passive voice when possible.  [Note: see Section 3.1.4 for more about this.]  Always use the singular "I" rather than the plural "we" when you are the only author of the paper.  Throughout the paper, avoid contractions, e.g. did not vs. didn’t.

5. If any of your methods is fully described in a previous publication (yours or someone else’s), you can cite that instead of describing the procedure again.

Example: The chromosomes were counted at meiosis in the anthers with the standard acetocarmine technique of Snow (1955).

3.2.4 Results (with excerpts from Steingraber et al. 1985)

The function of this section is to summarize general trends in the data without comment, bias, or interpretation. The results of statistical tests applied to your data are reported in this section although conclusions about your original hypotheses are saved for the Discussion section.

Tables and figures should be used when they are a more efficient way to convey information than verbal description. They must be independent units, accompanied by explanatory captions that allow them to be understood by someone who has not read the text. Do not repeat in the text the information in tables and figures, but do cite them, with a summary statement when that is appropriate.  Example:

Incorrect: The results are given in Figure 1.

Correct: Temperature was directly proportional to metabolic rate (Fig. 1).

Please note that the entire word "Figure" is almost never written in an article.  It is nearly always abbreviated as "Fig." and capitalized.  Tables are cited in the same way, although Table is not abbreviated.

Whenever possible, use a figure instead of a table. Relationships between numbers are more readily grasped when they are presented graphically rather than as columns in a table.

Data may be presented in figures and tables, but this may not substitute for a verbal summary of the findings. The text should be understandable by someone who has not seen your figures and tables.

1. All results should be presented, including those that do not support the hypothesis.

2. Statements made in the text must be supported by the results contained in figures and tables.

3. The results of statistical tests can be presented in parentheses following a verbal description.

Example: Fruit size was significantly greater in trees growing alone (t = 3.65, df = 2, p < 0.05).

Simple results of statistical tests may be reported in the text as shown in the preceding example.  The results of multiple tests may be reported in a table if that increases clarity. (See Section 11 of the Statistics Manual for more details about reporting the results of statistical tests.)  It is not necessary to provide a citation for a simple t-test of means, paired t-test, or linear regression.  If you use other tests, you should cite the text or reference you followed to do the test.  In your materials and methods section, you should report how you did the test (e.g. using the statistical analysis package of Excel). 

It is NEVER appropriate to simply paste the results from statistical software into the results section of your paper.  The output generally reports more information than is required and it is not in an appropriate format for a paper.

3.2.4.1 Tables

• Do not repeat information in a table that you are depicting in a graph or histogram; include a table only if it presents new information.
• It is easier to compare numbers by reading down a column rather than across a row. Therefore, list sets of data you want your reader to compare in vertical form.
• Provide each table with a number (Table 1, Table 2, etc.) and a title. The numbered title is placed above the table .
• Please see Section 11 of the Excel Reference and Statistics Manual for further information on reporting the results of statistical tests.

3.2.4.2. Figures

• These comprise graphs, histograms, and illustrations, both drawings and photographs. Provide each figure with a number (Fig. 1, Fig. 2, etc.) and a caption (or "legend") that explains what the figure shows. The numbered caption is placed below the figure .  Figure legend = Figure caption.
• Figures submitted for publication must be "photo ready," i.e., they will appear just as you submit them, or photographically reduced. Therefore, when you graduate from student papers to publishable manuscripts, you must learn to prepare figures that will not embarrass you. At the present time, virtually all journals require manuscripts to be submitted electronically and it is generally assumed that all graphs and maps will be created using software rather than being created by hand.  Nearly all journals have specific guidelines for the file types, resolution, and physical widths required for figures.  Only in a few cases (e.g. sketched diagrams) would figures still be created by hand using ink and those figures would be scanned and labeled using graphics software.  Proportions must be the same as those of the page in the journal to which the paper will be submitted. 
• Graphs and Histograms: Both can be used to compare two variables. However, graphs show continuous change, whereas histograms show discrete variables only.  You can compare groups of data by plotting two or even three lines on one graph, but avoid cluttered graphs that are hard to read, and do not plot unrelated trends on the same graph. For both graphs, and histograms, plot the independent variable on the horizontal (x) axis and the dependent variable on the vertical (y) axis. Label both axes, including units of measurement except in the few cases where variables are unitless, such as absorbance.
• Drawings and Photographs: These are used to illustrate organisms, experimental apparatus, models of structures, cellular and subcellular structure, and results of procedures like electrophoresis. Preparing such figures well is a lot of work and can be very expensive, so each figure must add enough to justify its preparation and publication, but good figures can greatly enhance a professional article, as your reading in biological journals has already shown.

3.2.5 Discussion (taken from Steingraber et al. 1985)

The function of this section is to analyze the data and relate them to other studies. To "analyze" means to evaluate the meaning of your results in terms of the original question or hypothesis and point out their biological significance.

1. The Discussion should contain at least:

• the relationship between the results and the original hypothesis, i.e., whether they support the hypothesis, or cause it to be rejected or modified
• an integration of your results with those of previous studies in order to arrive at explanations for the observed phenomena
• possible explanations for unexpected results and observations, phrased as hypotheses that can be tested by realistic experimental procedures, which you should describe

2. Trends that are not statistically significant can still be discussed if they are suggestive or interesting, but cannot be made the basis for conclusions as if they were significant.

3. Avoid redundancy between the Results and the Discussion section. Do not repeat detailed descriptions of the data and results in the Discussion. In some journals, Results and Discussions are joined in a single section, in order to permit a single integrated treatment with minimal repetition. This is more appropriate for short, simple articles than for longer, more complicated ones.

4. End the Discussion with a summary of the principal points you want the reader to remember. This is also the appropriate place to propose specific further study if that will serve some purpose, but do not end with the tired cliché that "this problem needs more study." All problems in biology need more study. Do not close on what you wish you had done, rather finish stating your conclusions and contributions.

3.2.6 Title

The title of the paper should be the last thing that you write.  That is because it should distill the essence of the paper even more than the abstract (the next to last thing that you write). 

The title should contain three elements:

1. the name of the organism studied;

2. the particular aspect or system studied;

3. the variable(s) manipulated.

Do not be afraid to be grammatically creative. Here are some variations on a theme, all suitable as titles:

THE EFFECT OF TEMPERATURE ON GERMINATION OF ZEA MAYS

DOES TEMPERATURE AFFECT GERMINATION OF ZEA MAYS?

TEMPERATURE AND ZEA MAYS GERMINATION: IMPLICATIONS FOR AGRICULTURE

Sometimes it is possible to include the principal result or conclusion in the title:

HIGH TEMPERATURES REDUCE GERMINATION OF ZEA MAYS

Note for the BSCI 1510L class: to make your paper look more like a real paper, you can list all of the other group members as co-authors.  However, if you do that, you should list you name first so that we know that you wrote it.

3.2.7 Literature Cited

Please refer to section 2.1 of this guide.

• << Previous: 3.1 Specific details regarding scientific writing
• Next: 4 For further information >>
• Last Updated: Apr 19, 2023 2:37 PM
• URL: https://researchguides.library.vanderbilt.edu/bsci1510L

Spatial difference-in-differences analysis of smart city pilot policy and industrial pollution reduction: the mediating role of S&T fiscal expenditure

• Research Article
• Published: 25 March 2024

Cite this article

• Acheng Zhang   ORCID: orcid.org/0000-0002-9311-9160 1 &
• Yonglin Wen 2  

62 Accesses

Explore all metrics

Smart city has become one of the most important tool to achieve digital transformation and intelligent development. However, the impacts of smart city pilots (SCP) on different industrial pollution have yet to be tested, and the mechanisms of SCP affect industrial pollution could be richer. In this paper, we construct a spatial difference-in-difference model for 2004–2019 by mapping SCP policy to Chinese city data to systematically quantify the impact and its potential mechanisms of digital transformation on industrial pollution. Our results show that the SCP policy achieves industrial pollution reduction targets, on average, wastewater and SO2 emissions decreased by 6.4% and 6.5%, respectively. Cities with SCP policy have more industrial pollution compared to cities without SCP policy, implying a beggar-thy-neighbor effect of SCP policy. Furthermore, significant regional disparities come to light; SCP policy in the Pearl River Delta exceeds other regions such as the Yangtze River Delta and Jing-Jin-Ji city cluster in terms of realizing the impact of industrial pollution reduction. Importantly, mechanism analysis indicated that the SCP reduced industrial pollution was partially mediated by government S&T fiscal expenditure.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Russian Federation)

Instant access to the full article PDF.

Rent this article via DeepDyve

Institutional subscriptions

Similar content being viewed by others

Promoting Cleaner Industry: Assessing the Impact of Smart City Pilot Policies in China within the Context of Knowledge-Based Economic Dynamics

Wenhui Luo, Peiling Yang, … Zihan Lin

Spatial spillover effects of national-level eco-industrial park establishment on regional ecological efficiency: evidence from 271 cities in China

Zilue Zhang & Xiangjie Wei

Effects of special fiscal revenue on industrial pollution and the spatial spillover: evidence from 30 provinces in China

Shen Zhong, Lang Wang & Fengge Yao

Data availability

All of the data generated or analyzed during this study are included in this published article.

Ahvenniemi H, Huovila A, Pinto-Sepp I, Airaksinen M (2017) What are the differences between sustainable and smart cities? Cities 60:234–245

Article   Google Scholar  

Albino V, Berardi U, Dangelico RM (2015) Smart cities: definitions, dimensions, performance, and initiatives. J Urban Technol 22(1):3–21

Almalki FA, Alsamhi S, Sahal R, Hassan J, Breslin J (2021) Green iot for eco-friendly and sustainable smart cities: future directions and opportunities. Mobile Netw Appl 28(1):178–202

Andrea C, Del B (2018) Smart innovative cities: the impact of Smart City Policies on urban innovation. Technol Forecast Soc Chang 142:373–383

Google Scholar  

Anthopoulos L (2017) Smart utopia vs smart reality: learning by experience from 10 smart city cases. Cities 63:128–148

Appio FP, Lima M, Paroutis S (2019) Understanding smart cities: innovation ecosystems, technological advancements, and societal challenges. Technol Forecast Soc Chang 142:1–14

Azimi M, Feng F, Yang Y, Azimi M, Feng F, Yang Y (2018) Air pollution inequality and its sources in SO2 and NOX emissions among Chinese provinces from 2006 to 2015. Sustainability 10(2):367

Bao R, Zhang A (2020) Does lockdown reduce air pollution? evidence from 44 cities in northern china. Sci Total Environ 731:139052

Article   CAS   Google Scholar  

Baron RM, Kenny DA (1986) The moderator-mediator variable distinction in social psychological research: conceptual, strategic, and statistical considerations. J Pers Soc Psychol 51(6):1173–1182

Batty M, Axhausen W, Giannotti F, Pozdnoukhov A, Bazzani A, Wachowicz M, Ouzounis G, Portugali Y (2012) Smart cities of the future. European Physical J Special Topics 214(1):481–518

Bakc T, Almirall E, Wareham J (2013) A smart city initiative: the case of Barcelona. J Knowl Econ 4(2):135–148

Brandl J, Zielinska I (2020) Reviewing the smart city Vienna framework strategy’s potential as an eco-social policy in the context of quality of work and socio-ecological transformation. Sustainability 12:859–875

Caragliu A, BoC D, Nijkamp P (2011) Smart cities in Europe. Urban Insight 18(2):65–82

Chen P (2023) The impact of smart city pilots on corporate total factor productivity. Environ Sci Pollut Res 29:83155–83168

Chen S, Jia K (2020) Research on China’s environmental governance in the context of digital transformation: rethinking and innovation of theoretical foundations. E-Government 10:20–28

Copeland BR, Taylor MS (2004) Trade, growth, and the environment. J Econ Lit 42(1):7–71

Costa LG, Cole TB, Coburn J, Chang YC, Roqué PJ (2015) Neurotoxicity of traffic-related air pollution. Neurotoxicology 59:133–139

Dunleavy P, Margetts H, Tinkler BJ (2006) New public management is dead: long live digital-era governance. J Publ Adm Res Theory 16(3):467–494

Fa Gai Gao Ji (2014) The Guidance on Promoting the Healthy Development of Smart Cities. No. 1770

Fredriksson PG, List JA, Millimet DL (2003) Bureaucratic corruption, environmental policy and inbound us FDI: theory and evidence. J Public Econ 87(7):1407–1430

Ghaemi Z, Alimohammadi A, Farnaghi M (2018) LaSVM-based big data learning system for dynamic prediction of air pollution in Tehran. Environ Monit Assess 190(5):1–17

Gong DX, Shan XF (2023) How does smart city construction affect urban-rural collaborative development? A quasi-natural experiment from Chinese cities. Land 12(8):1571

Guedes A, Alvarenga JC, Goulart M, Rodriguez M, Soares C (2018) Smart cities: the main drivers for increasing the intelligence of cities. Sustainability 10(9):3121

Guo Y, Zeng H, Zheng R, Li S, Barnett AG, Zhang S, Zou X, Huxley R, Chen W, Williams G (2016) The association between lung cancer incidence and ambient air pollution in China: a spatiotemporal analysis. Environ Res 144:60–65

Hasan MK, Shahriar A, Jim KU (2019) Water pollution in Bangladesh and its impact on public health. Heliyon 5(8):e02145

Hosseini HM, Kaneko S (2013) Can environmental quality spread through institutions? Energy Policy 56:312–321

Huang K, Zhuang G, Lin Y, Fu JS, Wang Q, Liu T, CaoB, (2012) Typical types and formation mechanisms of haze in an Eastern Asia megacity. Shanghai Atmos Chem Physics 12(1):105–124

Jacobson LS, LaLonde RJ, Sullivan DG (1993) Earning losses of displaced workers. Am Econ Rev 83(4):685–709

Jiang H, Jiang P, Wang D, Wu J (2021) Can smart city construction facilitate green total factor productivity? a quasi-natural experiment based on china’s pilot smart city. Sustain Cities Soc 69(3):102809

Kampa M, Castanas E (2008) Human health effects of air pollution. Environ Pollu 151(2):362–367

Kelejian HH, Prucha IR (2010) Specification and estimation of spatial autoregressive models with autoregressive and heteroskedastic disturbances. J Econom 157(1):53–67

Keller W, Levinson KA (2002) Pollution abatement costs and foreign direct investment inflows to us states. Rev Econ Stat 84(4):691–703

Kohli R, Johnson S (2011) Digital transformation in latecomer industries: CIO and CEO leadership lessons from Encana oil & gas (USA) inc. Mis Q Exec 10(4):141–156

Kunzmann KR (2014) Smart cities: a new paradigm of urban development. Crios 4(1):9–20

Li S, Ke D (2000) A review of research on the origin of environmental externalities theory. EconTheory and Econ Manag 5:63–66

Liu G, Wan S (2023) Does the synergy of the construction of high-speed railways and smart city pilot cut carbon emissions in Chinese cities? Environ Sci Pollut Res 30(40):93165–93178

Liu HM, Fang CL, Zhang XL, Wang ZY, Bao C, Lie FZ (2017) The effect of natural and anthropogenic factors on haze pollution in Chinese cities: a spatial econometrics approach. J Clean Prod 165:323–333

Liu X, Xia H (2019) Empirical analysis of the influential factors of haze pollution in China—based on spatial econometric model. Energy Environ 30(5):854–866

Luvisi A, Lorenzini G (2014) Rfid-plants in the smart city: applications and outlook for urban green management - Sciencedirect. Urban for Urban Green 13(4):630–637

Man SW, WangT HHC, Kwok C, Lu K, Abbas S (2018) Towards a smart city: development and application of an improved integrated environmental monitoring system. Sustainability 10(3):623–639

Masik G, Sagan I, Scott JW (2021) Smart City strategies and new urban development policies in the Polish context. Cities 108:102970

Matt C, Hess T, Benlian A (2015) Digital transformation strategies. Bus Inf Syst Eng 57(5):339–343

Myeong S, Shahzad K (2021) Integrating data-based strategies and advanced technologies with efficient air pollution management in smart cities. Sustainability 13(13):7168

Muvuna J, Boutaleb T, Mickovski SB, Baker K, Mohammad GS, Cools M et al (2020) Information integration in a smart city system—a case study on air pollution removal by green infrastructure through a vehicle smart routing system. Sustainability 12(12):5099

Mora L, Deakin M, Reid A (2019) Strategic principles for smart city development: a multiple case study analysis of European best practices. Technol Forecast Soc Chang 142:70–97

Mundula L, Auci S (2012) Smart cities and a stochastic frontier analysis: a comparison among european cities. SSRN Electronic J 14(3):482–492

Qiong S, Rui W, Yuxi P, Yanchao F (2023) The effectiveness of smart city policy on pollution reduction in China: new evidence from a quasi-natural experiment. Environ Sci Pollut Res 30(18):52841–52857

Razmjoo A, Aliehyaei M, Nezhad MM, Kaigutha LG, Mirjalili S (2021) Investigating smart city development based on green buildings, electrical vehicles and feasible indicators. Sustain Dev 13(14):7808–7822

CAS   Google Scholar  

Shah KU, Niles K (2016) Energy policy in the Caribbean green economy context and the institutional analysis and design (iad) framework as a proposed tool for its development. Energy Policy 98:768–777

Shamsuzzoha A, Niemi J, Piya S, Rutledge K (2021) Smart city for sustainable environment: a comparison of participatory strategies from Helsinki, Singapore and London. Cities 114(12):103194

Shi DQ, Ding H, Wei P, Liu JJ (2018) Can smart city construction reduce environmental pollution. China Indust Econ 6:117–135

Su Y, Hu M, Yu X (2023) Does the development of smart cities help protect the environment? J Environ Plan Manag 66(3):572–589

Sun ZQ, Wang Q (2021) The asymmetric effect of natural resource abundance on economic growth and environmental pollution: evidence from resource-rich economy. Resour Policy 72(2):102085

Tong F, Hd A, Zl A, Jian ZC (2020) Spatial spillover effects of environmental regulations on air pollution: evidence from urban agglomerations in china. J Environ Manag 272:110998

Vanolo A (2013) Smartmentality: the smart city as disciplinary strategy. Urban Stud 51(5):883–898

Wang J, Deng K (2022) Impact and mechanism analysis of smart city policy on urban innovation: evidence from China. Econ Anal Policy 73:574–587

Wang KL, Pang SQ, Zhang FQ, MiaoZ SHP (2022) The impact assessment of smart city policy on urban green total-factor productivity: evidence from china. Environ Impact Assess Rev 94:106756

Wang Q, Yang Z (2016) Industrial water pollution, water environment treatment, and health risks in china. Environ Pollut 218(11):358–365

Wang Q, Yi H (2021) New energy demonstration program and China’s urban green economic growth: Do regional characteristics make a difference? Energy Policy 151:112161

Wang X, Zhong M (2023) Can digital economy reduce carbon emission intensity? empirical evidence from China’s smart city pilot policies. Environ Sci Pollut Res 30:51749–51769

Westerman G, Bonnet D, McAfee A (2014) Leading digital: turning technology into business transformation. Harvard Business Press, Boston, Massachusetts

World Health Organization (WHO) (2010) Guidelines for drinking-water quality. WHO, Geneva, Switzerland

Xu B, Lin B (2016) Regional differences of pollution emissions in China: contributing factors and mitigation strategies. J Clean Prod 112:1454–1463

Xu A, Wang W, Zhu Y (2023) Does smart city pilot policy reduce CO2 emissions fromindustrial firms? Insights from China. J Innov Knowl 8(3):100367

Xu M, Wu J (2020) Can Chinese-style environmental collaboration improve the air quality? a quasi-natural experimental study across Chinese cities. Environ Impact Assess Rev 85(4):106466

Yigitcanlar T, Kamruzzaman M (2018) Does smart city policy lead to sustainability of cities? Land Use Pol 73:49–58

Yu Y, Zhang N (2019) Does smart city policy improve energy efficiency? evidence from a quasi-natural experiment in china. J Clean Prod 229:501–512

Zawieska J, Pieriegud J, Hayashi Y (2018) Smart city as a tool for sustainable mobility and transport decarbonisation. Transp Policy 63:39–50

Zeng J, Liu T, Feiock R, Li F (2019) The impacts of China’s provincial energy policies on major air pollutants: a spatial econometric analysis. Energy Policy 132:392–403

Download references

This work was supported by the fund project of the National Natural Science Foundation of China [No.71974203], and the Ministry of Education of Humanities and Social Science project [No. 22YJC630140].

Author information

Authors and affiliations.

School of Public Administration, Central China Normal University, No. 382, Xiongchu Street, Hongshan District, Wuhan, 430079, Hubei Province, China

Acheng Zhang

School of Public Affairs, Xiamen University, No. 422, Siming South Road, Siming District, Xiamen, 361005, Fujian, China

Yonglin Wen

You can also search for this author in PubMed   Google Scholar

Contributions

Material preparation, data collection, and analysis were performed by A.Z. and Y.W. The first draft of the manuscript was written by A.Z., and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

Corresponding author

Correspondence to Acheng Zhang .

Ethics declarations

Ethical approval.

This article does not contain any studies with human participants or animals performed by any of the authors.

Consent to participate

I am free to contact any of the people involved in the research to seek further clarification and information.

Consent for publication

Not applicable.

Conflict of interest

The authors declare no competing interests.

Additional information

Responsible Editor: Philippe Garrigues

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Zhang, A., Wen, Y. Spatial difference-in-differences analysis of smart city pilot policy and industrial pollution reduction: the mediating role of S&T fiscal expenditure. Environ Sci Pollut Res (2024). https://doi.org/10.1007/s11356-024-32611-8

Download citation

Received : 08 February 2023

Accepted : 19 February 2024

Published : 25 March 2024

DOI : https://doi.org/10.1007/s11356-024-32611-8

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Digital transformation
• Smart city pilots
• Industrial pollution
• S&T fiscal expenditure
• Spatial difference-in-differences analysis
• Find a journal
• Publish with us
• Track your research

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• Yale J Biol Med
• v.84(3); 2011 Sep

Focus: Education — Career Advice

How to write your first research paper.

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication.

It is late at night. You have been struggling with your project for a year. You generated an enormous amount of interesting data. Your pipette feels like an extension of your hand, and running western blots has become part of your daily routine, similar to brushing your teeth. Your colleagues think you are ready to write a paper, and your lab mates tease you about your “slow” writing progress. Yet days pass, and you cannot force yourself to sit down to write. You have not written anything for a while (lab reports do not count), and you feel you have lost your stamina. How does the writing process work? How can you fit your writing into a daily schedule packed with experiments? What section should you start with? What distinguishes a good research paper from a bad one? How should you revise your paper? These and many other questions buzz in your head and keep you stressed. As a result, you procrastinate. In this paper, I will discuss the issues related to the writing process of a scientific paper. Specifically, I will focus on the best approaches to start a scientific paper, tips for writing each section, and the best revision strategies.

1. Schedule your writing time in Outlook

Whether you have written 100 papers or you are struggling with your first, starting the process is the most difficult part unless you have a rigid writing schedule. Writing is hard. It is a very difficult process of intense concentration and brain work. As stated in Hayes’ framework for the study of writing: “It is a generative activity requiring motivation, and it is an intellectual activity requiring cognitive processes and memory” [ 1 ]. In his book How to Write a Lot: A Practical Guide to Productive Academic Writing , Paul Silvia says that for some, “it’s easier to embalm the dead than to write an article about it” [ 2 ]. Just as with any type of hard work, you will not succeed unless you practice regularly. If you have not done physical exercises for a year, only regular workouts can get you into good shape again. The same kind of regular exercises, or I call them “writing sessions,” are required to be a productive author. Choose from 1- to 2-hour blocks in your daily work schedule and consider them as non-cancellable appointments. When figuring out which blocks of time will be set for writing, you should select the time that works best for this type of work. For many people, mornings are more productive. One Yale University graduate student spent a semester writing from 8 a.m. to 9 a.m. when her lab was empty. At the end of the semester, she was amazed at how much she accomplished without even interrupting her regular lab hours. In addition, doing the hardest task first thing in the morning contributes to the sense of accomplishment during the rest of the day. This positive feeling spills over into our work and life and has a very positive effect on our overall attitude.

Rule 1: Create regular time blocks for writing as appointments in your calendar and keep these appointments.

2. start with an outline.

Now that you have scheduled time, you need to decide how to start writing. The best strategy is to start with an outline. This will not be an outline that you are used to, with Roman numerals for each section and neat parallel listing of topic sentences and supporting points. This outline will be similar to a template for your paper. Initially, the outline will form a structure for your paper; it will help generate ideas and formulate hypotheses. Following the advice of George M. Whitesides, “. . . start with a blank piece of paper, and write down, in any order, all important ideas that occur to you concerning the paper” [ 3 ]. Use Table 1 as a starting point for your outline. Include your visuals (figures, tables, formulas, equations, and algorithms), and list your findings. These will constitute the first level of your outline, which will eventually expand as you elaborate.

The next stage is to add context and structure. Here you will group all your ideas into sections: Introduction, Methods, Results, and Discussion/Conclusion ( Table 2 ). This step will help add coherence to your work and sift your ideas.

Now that you have expanded your outline, you are ready for the next step: discussing the ideas for your paper with your colleagues and mentor. Many universities have a writing center where graduate students can schedule individual consultations and receive assistance with their paper drafts. Getting feedback during early stages of your draft can save a lot of time. Talking through ideas allows people to conceptualize and organize thoughts to find their direction without wasting time on unnecessary writing. Outlining is the most effective way of communicating your ideas and exchanging thoughts. Moreover, it is also the best stage to decide to which publication you will submit the paper. Many people come up with three choices and discuss them with their mentors and colleagues. Having a list of journal priorities can help you quickly resubmit your paper if your paper is rejected.

Rule 2: Create a detailed outline and discuss it with your mentor and peers.

3. continue with drafts.

After you get enough feedback and decide on the journal you will submit to, the process of real writing begins. Copy your outline into a separate file and expand on each of the points, adding data and elaborating on the details. When you create the first draft, do not succumb to the temptation of editing. Do not slow down to choose a better word or better phrase; do not halt to improve your sentence structure. Pour your ideas into the paper and leave revision and editing for later. As Paul Silvia explains, “Revising while you generate text is like drinking decaffeinated coffee in the early morning: noble idea, wrong time” [ 2 ].

Many students complain that they are not productive writers because they experience writer’s block. Staring at an empty screen is frustrating, but your screen is not really empty: You have a template of your article, and all you need to do is fill in the blanks. Indeed, writer’s block is a logical fallacy for a scientist ― it is just an excuse to procrastinate. When scientists start writing a research paper, they already have their files with data, lab notes with materials and experimental designs, some visuals, and tables with results. All they need to do is scrutinize these pieces and put them together into a comprehensive paper.

3.1. Starting with Materials and Methods

If you still struggle with starting a paper, then write the Materials and Methods section first. Since you have all your notes, it should not be problematic for you to describe the experimental design and procedures. Your most important goal in this section is to be as explicit as possible by providing enough detail and references. In the end, the purpose of this section is to allow other researchers to evaluate and repeat your work. So do not run into the same problems as the writers of the sentences in (1):

1a. Bacteria were pelleted by centrifugation. 1b. To isolate T cells, lymph nodes were collected.

As you can see, crucial pieces of information are missing: the speed of centrifuging your bacteria, the time, and the temperature in (1a); the source of lymph nodes for collection in (b). The sentences can be improved when information is added, as in (2a) and (2b), respectfully:

2a. Bacteria were pelleted by centrifugation at 3000g for 15 min at 25°C. 2b. To isolate T cells, mediastinal and mesenteric lymph nodes from Balb/c mice were collected at day 7 after immunization with ovabumin.

If your method has previously been published and is well-known, then you should provide only the literature reference, as in (3a). If your method is unpublished, then you need to make sure you provide all essential details, as in (3b).

3a. Stem cells were isolated, according to Johnson [23]. 3b. Stem cells were isolated using biotinylated carbon nanotubes coated with anti-CD34 antibodies.

Furthermore, cohesion and fluency are crucial in this section. One of the malpractices resulting in disrupted fluency is switching from passive voice to active and vice versa within the same paragraph, as shown in (4). This switching misleads and distracts the reader.

4. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. We took ratings of enjoyment, mood, and arousal as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness [ 4 ].

The problem with (4) is that the reader has to switch from the point of view of the experiment (passive voice) to the point of view of the experimenter (active voice). This switch causes confusion about the performer of the actions in the first and the third sentences. To improve the coherence and fluency of the paragraph above, you should be consistent in choosing the point of view: first person “we” or passive voice [ 5 ]. Let’s consider two revised examples in (5).

5a. We programmed behavioral computer-based experiments of Study 1 by using E-Prime. We took ratings of enjoyment, mood, and arousal by using Visual Analogue Scales (SI Methods) as the patients listened to preferred pleasant music and unpreferred music. We operationalized the preferred and unpreferred status of the music along a continuum of pleasantness. 5b. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. Ratings of enjoyment, mood, and arousal were taken as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness.

If you choose the point of view of the experimenter, then you may end up with repetitive “we did this” sentences. For many readers, paragraphs with sentences all beginning with “we” may also sound disruptive. So if you choose active sentences, you need to keep the number of “we” subjects to a minimum and vary the beginnings of the sentences [ 6 ].

Interestingly, recent studies have reported that the Materials and Methods section is the only section in research papers in which passive voice predominantly overrides the use of the active voice [ 5 , 7 , 8 , 9 ]. For example, Martínez shows a significant drop in active voice use in the Methods sections based on the corpus of 1 million words of experimental full text research articles in the biological sciences [ 7 ]. According to the author, the active voice patterned with “we” is used only as a tool to reveal personal responsibility for the procedural decisions in designing and performing experimental work. This means that while all other sections of the research paper use active voice, passive voice is still the most predominant in Materials and Methods sections.

Writing Materials and Methods sections is a meticulous and time consuming task requiring extreme accuracy and clarity. This is why when you complete your draft, you should ask for as much feedback from your colleagues as possible. Numerous readers of this section will help you identify the missing links and improve the technical style of this section.

Rule 3: Be meticulous and accurate in describing the Materials and Methods. Do not change the point of view within one paragraph.

3.2. writing results section.

For many authors, writing the Results section is more intimidating than writing the Materials and Methods section . If people are interested in your paper, they are interested in your results. That is why it is vital to use all your writing skills to objectively present your key findings in an orderly and logical sequence using illustrative materials and text.

Your Results should be organized into different segments or subsections where each one presents the purpose of the experiment, your experimental approach, data including text and visuals (tables, figures, schematics, algorithms, and formulas), and data commentary. For most journals, your data commentary will include a meaningful summary of the data presented in the visuals and an explanation of the most significant findings. This data presentation should not repeat the data in the visuals, but rather highlight the most important points. In the “standard” research paper approach, your Results section should exclude data interpretation, leaving it for the Discussion section. However, interpretations gradually and secretly creep into research papers: “Reducing the data, generalizing from the data, and highlighting scientific cases are all highly interpretive processes. It should be clear by now that we do not let the data speak for themselves in research reports; in summarizing our results, we interpret them for the reader” [ 10 ]. As a result, many journals including the Journal of Experimental Medicine and the Journal of Clinical Investigation use joint Results/Discussion sections, where results are immediately followed by interpretations.

Another important aspect of this section is to create a comprehensive and supported argument or a well-researched case. This means that you should be selective in presenting data and choose only those experimental details that are essential for your reader to understand your findings. You might have conducted an experiment 20 times and collected numerous records, but this does not mean that you should present all those records in your paper. You need to distinguish your results from your data and be able to discard excessive experimental details that could distract and confuse the reader. However, creating a picture or an argument should not be confused with data manipulation or falsification, which is a willful distortion of data and results. If some of your findings contradict your ideas, you have to mention this and find a plausible explanation for the contradiction.

In addition, your text should not include irrelevant and peripheral information, including overview sentences, as in (6).

6. To show our results, we first introduce all components of experimental system and then describe the outcome of infections.

Indeed, wordiness convolutes your sentences and conceals your ideas from readers. One common source of wordiness is unnecessary intensifiers. Adverbial intensifiers such as “clearly,” “essential,” “quite,” “basically,” “rather,” “fairly,” “really,” and “virtually” not only add verbosity to your sentences, but also lower your results’ credibility. They appeal to the reader’s emotions but lower objectivity, as in the common examples in (7):

7a. Table 3 clearly shows that … 7b. It is obvious from figure 4 that …

Another source of wordiness is nominalizations, i.e., nouns derived from verbs and adjectives paired with weak verbs including “be,” “have,” “do,” “make,” “cause,” “provide,” and “get” and constructions such as “there is/are.”

8a. We tested the hypothesis that there is a disruption of membrane asymmetry. 8b. In this paper we provide an argument that stem cells repopulate injured organs.

In the sentences above, the abstract nominalizations “disruption” and “argument” do not contribute to the clarity of the sentences, but rather clutter them with useless vocabulary that distracts from the meaning. To improve your sentences, avoid unnecessary nominalizations and change passive verbs and constructions into active and direct sentences.

9a. We tested the hypothesis that the membrane asymmetry is disrupted. 9b. In this paper we argue that stem cells repopulate injured organs.

Your Results section is the heart of your paper, representing a year or more of your daily research. So lead your reader through your story by writing direct, concise, and clear sentences.

Rule 4: Be clear, concise, and objective in describing your Results.

3.3. now it is time for your introduction.

Now that you are almost half through drafting your research paper, it is time to update your outline. While describing your Methods and Results, many of you diverged from the original outline and re-focused your ideas. So before you move on to create your Introduction, re-read your Methods and Results sections and change your outline to match your research focus. The updated outline will help you review the general picture of your paper, the topic, the main idea, and the purpose, which are all important for writing your introduction.

The best way to structure your introduction is to follow the three-move approach shown in Table 3 .

Adapted from Swales and Feak [ 11 ].

The moves and information from your outline can help to create your Introduction efficiently and without missing steps. These moves are traffic signs that lead the reader through the road of your ideas. Each move plays an important role in your paper and should be presented with deep thought and care. When you establish the territory, you place your research in context and highlight the importance of your research topic. By finding the niche, you outline the scope of your research problem and enter the scientific dialogue. The final move, “occupying the niche,” is where you explain your research in a nutshell and highlight your paper’s significance. The three moves allow your readers to evaluate their interest in your paper and play a significant role in the paper review process, determining your paper reviewers.

Some academic writers assume that the reader “should follow the paper” to find the answers about your methodology and your findings. As a result, many novice writers do not present their experimental approach and the major findings, wrongly believing that the reader will locate the necessary information later while reading the subsequent sections [ 5 ]. However, this “suspense” approach is not appropriate for scientific writing. To interest the reader, scientific authors should be direct and straightforward and present informative one-sentence summaries of the results and the approach.

Another problem is that writers understate the significance of the Introduction. Many new researchers mistakenly think that all their readers understand the importance of the research question and omit this part. However, this assumption is faulty because the purpose of the section is not to evaluate the importance of the research question in general. The goal is to present the importance of your research contribution and your findings. Therefore, you should be explicit and clear in describing the benefit of the paper.

The Introduction should not be long. Indeed, for most journals, this is a very brief section of about 250 to 600 words, but it might be the most difficult section due to its importance.

Rule 5: Interest your reader in the Introduction section by signalling all its elements and stating the novelty of the work.

3.4. discussion of the results.

For many scientists, writing a Discussion section is as scary as starting a paper. Most of the fear comes from the variation in the section. Since every paper has its unique results and findings, the Discussion section differs in its length, shape, and structure. However, some general principles of writing this section still exist. Knowing these rules, or “moves,” can change your attitude about this section and help you create a comprehensive interpretation of your results.

The purpose of the Discussion section is to place your findings in the research context and “to explain the meaning of the findings and why they are important, without appearing arrogant, condescending, or patronizing” [ 11 ]. The structure of the first two moves is almost a mirror reflection of the one in the Introduction. In the Introduction, you zoom in from general to specific and from the background to your research question; in the Discussion section, you zoom out from the summary of your findings to the research context, as shown in Table 4 .

Adapted from Swales and Feak and Hess [ 11 , 12 ].

The biggest challenge for many writers is the opening paragraph of the Discussion section. Following the moves in Table 1 , the best choice is to start with the study’s major findings that provide the answer to the research question in your Introduction. The most common starting phrases are “Our findings demonstrate . . .,” or “In this study, we have shown that . . .,” or “Our results suggest . . .” In some cases, however, reminding the reader about the research question or even providing a brief context and then stating the answer would make more sense. This is important in those cases where the researcher presents a number of findings or where more than one research question was presented. Your summary of the study’s major findings should be followed by your presentation of the importance of these findings. One of the most frequent mistakes of the novice writer is to assume the importance of his findings. Even if the importance is clear to you, it may not be obvious to your reader. Digesting the findings and their importance to your reader is as crucial as stating your research question.

Another useful strategy is to be proactive in the first move by predicting and commenting on the alternative explanations of the results. Addressing potential doubts will save you from painful comments about the wrong interpretation of your results and will present you as a thoughtful and considerate researcher. Moreover, the evaluation of the alternative explanations might help you create a logical step to the next move of the discussion section: the research context.

The goal of the research context move is to show how your findings fit into the general picture of the current research and how you contribute to the existing knowledge on the topic. This is also the place to discuss any discrepancies and unexpected findings that may otherwise distort the general picture of your paper. Moreover, outlining the scope of your research by showing the limitations, weaknesses, and assumptions is essential and adds modesty to your image as a scientist. However, make sure that you do not end your paper with the problems that override your findings. Try to suggest feasible explanations and solutions.

If your submission does not require a separate Conclusion section, then adding another paragraph about the “take-home message” is a must. This should be a general statement reiterating your answer to the research question and adding its scientific implications, practical application, or advice.

Just as in all other sections of your paper, the clear and precise language and concise comprehensive sentences are vital. However, in addition to that, your writing should convey confidence and authority. The easiest way to illustrate your tone is to use the active voice and the first person pronouns. Accompanied by clarity and succinctness, these tools are the best to convince your readers of your point and your ideas.

Rule 6: Present the principles, relationships, and generalizations in a concise and convincing tone.

4. choosing the best working revision strategies.

Now that you have created the first draft, your attitude toward your writing should have improved. Moreover, you should feel more confident that you are able to accomplish your project and submit your paper within a reasonable timeframe. You also have worked out your writing schedule and followed it precisely. Do not stop ― you are only at the midpoint from your destination. Just as the best and most precious diamond is no more than an unattractive stone recognized only by trained professionals, your ideas and your results may go unnoticed if they are not polished and brushed. Despite your attempts to present your ideas in a logical and comprehensive way, first drafts are frequently a mess. Use the advice of Paul Silvia: “Your first drafts should sound like they were hastily translated from Icelandic by a non-native speaker” [ 2 ]. The degree of your success will depend on how you are able to revise and edit your paper.

The revision can be done at the macrostructure and the microstructure levels [ 13 ]. The macrostructure revision includes the revision of the organization, content, and flow. The microstructure level includes individual words, sentence structure, grammar, punctuation, and spelling.

The best way to approach the macrostructure revision is through the outline of the ideas in your paper. The last time you updated your outline was before writing the Introduction and the Discussion. Now that you have the beginning and the conclusion, you can take a bird’s-eye view of the whole paper. The outline will allow you to see if the ideas of your paper are coherently structured, if your results are logically built, and if the discussion is linked to the research question in the Introduction. You will be able to see if something is missing in any of the sections or if you need to rearrange your information to make your point.

The next step is to revise each of the sections starting from the beginning. Ideally, you should limit yourself to working on small sections of about five pages at a time [ 14 ]. After these short sections, your eyes get used to your writing and your efficiency in spotting problems decreases. When reading for content and organization, you should control your urge to edit your paper for sentence structure and grammar and focus only on the flow of your ideas and logic of your presentation. Experienced researchers tend to make almost three times the number of changes to meaning than novice writers [ 15 , 16 ]. Revising is a difficult but useful skill, which academic writers obtain with years of practice.

In contrast to the macrostructure revision, which is a linear process and is done usually through a detailed outline and by sections, microstructure revision is a non-linear process. While the goal of the macrostructure revision is to analyze your ideas and their logic, the goal of the microstructure editing is to scrutinize the form of your ideas: your paragraphs, sentences, and words. You do not need and are not recommended to follow the order of the paper to perform this type of revision. You can start from the end or from different sections. You can even revise by reading sentences backward, sentence by sentence and word by word.

One of the microstructure revision strategies frequently used during writing center consultations is to read the paper aloud [ 17 ]. You may read aloud to yourself, to a tape recorder, or to a colleague or friend. When reading and listening to your paper, you are more likely to notice the places where the fluency is disrupted and where you stumble because of a very long and unclear sentence or a wrong connector.

Another revision strategy is to learn your common errors and to do a targeted search for them [ 13 ]. All writers have a set of problems that are specific to them, i.e., their writing idiosyncrasies. Remembering these problems is as important for an academic writer as remembering your friends’ birthdays. Create a list of these idiosyncrasies and run a search for these problems using your word processor. If your problem is demonstrative pronouns without summary words, then search for “this/these/those” in your text and check if you used the word appropriately. If you have a problem with intensifiers, then search for “really” or “very” and delete them from the text. The same targeted search can be done to eliminate wordiness. Searching for “there is/are” or “and” can help you avoid the bulky sentences.

The final strategy is working with a hard copy and a pencil. Print a double space copy with font size 14 and re-read your paper in several steps. Try reading your paper line by line with the rest of the text covered with a piece of paper. When you are forced to see only a small portion of your writing, you are less likely to get distracted and are more likely to notice problems. You will end up spotting more unnecessary words, wrongly worded phrases, or unparallel constructions.

After you apply all these strategies, you are ready to share your writing with your friends, colleagues, and a writing advisor in the writing center. Get as much feedback as you can, especially from non-specialists in your field. Patiently listen to what others say to you ― you are not expected to defend your writing or explain what you wanted to say. You may decide what you want to change and how after you receive the feedback and sort it in your head. Even though some researchers make the revision an endless process and can hardly stop after a 14th draft; having from five to seven drafts of your paper is a norm in the sciences. If you can’t stop revising, then set a deadline for yourself and stick to it. Deadlines always help.

Rule 7: Revise your paper at the macrostructure and the microstructure level using different strategies and techniques. Receive feedback and revise again.

5. it is time to submit.

It is late at night again. You are still in your lab finishing revisions and getting ready to submit your paper. You feel happy ― you have finally finished a year’s worth of work. You will submit your paper tomorrow, and regardless of the outcome, you know that you can do it. If one journal does not take your paper, you will take advantage of the feedback and resubmit again. You will have a publication, and this is the most important achievement.

What is even more important is that you have your scheduled writing time that you are going to keep for your future publications, for reading and taking notes, for writing grants, and for reviewing papers. You are not going to lose stamina this time, and you will become a productive scientist. But for now, let’s celebrate the end of the paper.

• Hayes JR. In: The Science of Writing: Theories, Methods, Individual Differences, and Applications. Levy CM, Ransdell SE, editors. Mahwah, NJ: Lawrence Erlbaum; 1996. A new framework for understanding cognition and affect in writing; pp. 1–28. [ Google Scholar ]
• Silvia PJ. How to Write a Lot. Washington, DC: American Psychological Association; 2007. [ Google Scholar ]
• Whitesides GM. Whitesides’ Group: Writing a Paper. Adv Mater. 2004; 16 (15):1375–1377. [ Google Scholar ]
• Soto D, Funes MJ, Guzmán-García A, Warbrick T, Rotshtein T, Humphreys GW. Pleasant music overcomes the loss of awareness in patients with visual neglect. Proc Natl Acad Sci USA. 2009; 106 (14):6011–6016. [ PMC free article ] [ PubMed ] [ Google Scholar ]
• Hofmann AH. Scientific Writing and Communication. Papers, Proposals, and Presentations. New York: Oxford University Press; 2010. [ Google Scholar ]
• Zeiger M. Essentials of Writing Biomedical Research Papers. 2nd edition. San Francisco, CA: McGraw-Hill Companies, Inc.; 2000. [ Google Scholar ]
• Martínez I. Native and non-native writers’ use of first person pronouns in the different sections of biology research articles in English. Journal of Second Language Writing. 2005; 14 (3):174–190. [ Google Scholar ]
• Rodman L. The Active Voice In Scientific Articles: Frequency And Discourse Functions. Journal Of Technical Writing And Communication. 1994; 24 (3):309–331. [ Google Scholar ]
• Tarone LE, Dwyer S, Gillette S, Icke V. On the use of the passive in two astrophysics journal papers with extensions to other languages and other fields. English for Specific Purposes. 1998; 17 :113–132. [ Google Scholar ]
• Penrose AM, Katz SB. Writing in the sciences: Exploring conventions of scientific discourse. New York: St. Martin’s Press; 1998. [ Google Scholar ]
• Swales JM, Feak CB. Academic Writing for Graduate Students. 2nd edition. Ann Arbor: University of Michigan Press; 2004. [ Google Scholar ]
• Hess DR. How to Write an Effective Discussion. Respiratory Care. 2004; 29 (10):1238–1241. [ PubMed ] [ Google Scholar ]
• Belcher WL. Writing Your Journal Article in 12 Weeks: a guide to academic publishing success. Thousand Oaks, CA: SAGE Publications; 2009. [ Google Scholar ]
• Single PB. Demystifying Dissertation Writing: A Streamlined Process of Choice of Topic to Final Text. Virginia: Stylus Publishing LLC; 2010. [ Google Scholar ]
• Faigley L, Witte SP. Analyzing revision. Composition and Communication. 1981; 32 :400–414. [ Google Scholar ]
• Flower LS, Hayes JR, Carey L, Schriver KS, Stratman J. Detection, diagnosis, and the strategies of revision. College Composition and Communication. 1986; 37 (1):16–55. [ Google Scholar ]
• Young BR. In: A Tutor’s Guide: Helping Writers One to One. Rafoth B, editor. Portsmouth, NH: Boynton/Cook Publishers; 2005. Can You Proofread This? pp. 140–158. [ Google Scholar ]

Organizing Your Social Sciences Research Paper: The Introduction

• Purpose of Guide
• Writing a Research Proposal
• Design Flaws to Avoid
• Independent and Dependent Variables
• Narrowing a Topic Idea
• Broadening a Topic Idea
• The Research Problem/Question
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• The C.A.R.S. Model
• Background Information
• Theoretical Framework
• Citation Tracking
• Evaluating Sources
• Reading Research Effectively
• Primary Sources
• Secondary Sources
• What Is Scholarly vs. Popular?
• Is it Peer-Reviewed?
• Qualitative Methods
• Quantitative Methods
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism [linked guide]
• Annotated Bibliography
• Grading Someone Else's Paper

The introduction leads the reader from a general subject area to a particular topic of inquiry. It establishes the scope, context, and significance of the research being conducted by summarizing current understanding and background information about the topic, stating the purpose of the work in the form of the research problem supported by a hypothesis or a set of questions, explaining briefly the methodological approach used to examine the research problem, highlighting the potential outcomes your study can reveal, and outlining the remaining structure and organization of the paper.

Key Elements of the Research Proposal . Prepared under the direction of the Superintendent and by the 2010 Curriculum Design and Writing Team. Baltimore County Public Schools.

Importance of a Good Introduction

Think of the introduction as a mental road map that must answer for the reader these four questions:

• What was I studying?
• Why was this topic important to investigate?
• What did we know about this topic before I did this study?
• How will this study advance new knowledge or new ways of understanding?

According to Reyes, there are three overarching goals of a good introduction: 1) ensure that you summarize prior studies about the topic in a manner that lays a foundation for understanding the research problem; 2) explain how your study specifically addresses gaps in the literature, insufficient consideration of the topic, or other deficiency in the literature; and, 3) note the broader theoretical, empirical, and/or policy contributions and implications of your research.

A well-written introduction is important because, quite simply, you never get a second chance to make a good first impression. The opening paragraphs of your paper will provide your readers with their initial impressions about the logic of your argument, your writing style, the overall quality of your research, and, ultimately, the validity of your findings and conclusions. A vague, disorganized, or error-filled introduction will create a negative impression, whereas, a concise, engaging, and well-written introduction will lead your readers to think highly of your analytical skills, your writing style, and your research approach. All introductions should conclude with a brief paragraph that describes the organization of the rest of the paper.

Hirano, Eliana. “Research Article Introductions in English for Specific Purposes: A Comparison between Brazilian, Portuguese, and English.” English for Specific Purposes 28 (October 2009): 240-250; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Introductions . The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide. Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Reyes, Victoria. Demystifying the Journal Article . Inside Higher Education.

Structure and Writing Style

I.  Structure and Approach

The introduction is the broad beginning of the paper that answers three important questions for the reader:

• What is this?
• Why should I read it?
• What do you want me to think about / consider doing / react to?

Think of the structure of the introduction as an inverted triangle of information that lays a foundation for understanding the research problem. Organize the information so as to present the more general aspects of the topic early in the introduction, then narrow your analysis to more specific topical information that provides context, finally arriving at your research problem and the rationale for studying it [often written as a series of key questions to be addressed or framed as a hypothesis or set of assumptions to be tested] and, whenever possible, a description of the potential outcomes your study can reveal.

These are general phases associated with writing an introduction: 1.  Establish an area to research by:

• Highlighting the importance of the topic, and/or
• Making general statements about the topic, and/or
• Presenting an overview on current research on the subject.

2.  Identify a research niche by:

• Opposing an existing assumption, and/or
• Revealing a gap in existing research, and/or
• Formulating a research question or problem, and/or
• Continuing a disciplinary tradition.

3.  Place your research within the research niche by:

• Stating the intent of your study,
• Outlining the key characteristics of your study,
• Describing important results, and
• Giving a brief overview of the structure of the paper.

NOTE:   It is often useful to review the introduction late in the writing process. This is appropriate because outcomes are unknown until you've completed the study. After you complete writing the body of the paper, go back and review introductory descriptions of the structure of the paper, the method of data gathering, the reporting and analysis of results, and the conclusion. Reviewing and, if necessary, rewriting the introduction ensures that it correctly matches the overall structure of your final paper.

II.  Delimitations of the Study

Delimitations refer to those characteristics that limit the scope and define the conceptual boundaries of your research . This is determined by the conscious exclusionary and inclusionary decisions you make about how to investigate the research problem. In other words, not only should you tell the reader what it is you are studying and why, but you must also acknowledge why you rejected alternative approaches that could have been used to examine the topic.

Obviously, the first limiting step was the choice of research problem itself. However, implicit are other, related problems that could have been chosen but were rejected. These should be noted in the conclusion of your introduction. For example, a delimitating statement could read, "Although many factors can be understood to impact the likelihood young people will vote, this study will focus on socioeconomic factors related to the need to work full-time while in school." The point is not to document every possible delimiting factor, but to highlight why previously researched issues related to the topic were not addressed.

Examples of delimitating choices would be:

• The key aims and objectives of your study,
• The research questions that you address,
• The variables of interest [i.e., the various factors and features of the phenomenon being studied],
• The method(s) of investigation,
• The time period your study covers, and
• Any relevant alternative theoretical frameworks that could have been adopted.

Review each of these decisions. Not only do you clearly establish what you intend to accomplish in your research, but you should also include a declaration of what the study does not intend to cover. In the latter case, your exclusionary decisions should be based upon criteria understood as, "not interesting"; "not directly relevant"; “too problematic because..."; "not feasible," and the like. Make this reasoning explicit!

NOTE:   Delimitations refer to the initial choices made about the broader, overall design of your study and should not be confused with documenting the limitations of your study discovered after the research has been completed.

ANOTHER NOTE : Do not view delimitating statements as admitting to an inherent failing or shortcoming in your research. They are an accepted element of academic writing intended to keep the reader focused on the research problem by explicitly defining the conceptual boundaries and scope of your study. It addresses any critical questions in the reader's mind of, "Why the hell didn't the author examine this?"

III.  The Narrative Flow

Issues to keep in mind that will help the narrative flow in your introduction :

• Your introduction should clearly identify the subject area of interest . A simple strategy to follow is to use key words from your title in the first few sentences of the introduction. This will help focus the introduction on the topic at the appropriate level and ensures that you get to the subject matter quickly without losing focus, or discussing information that is too general.
• Establish context by providing a brief and balanced review of the pertinent published literature that is available on the subject. The key is to summarize for the reader what is known about the specific research problem before you did your analysis. This part of your introduction should not represent a comprehensive literature review--that comes next. It consists of a general review of the important, foundational research literature [with citations] that establishes a foundation for understanding key elements of the research problem. See the drop-down menu under this tab for " Background Information " regarding types of contexts.
• Clearly state the hypothesis that you investigated . When you are first learning to write in this format it is okay, and actually preferable, to use a past statement like, "The purpose of this study was to...." or "We investigated three possible mechanisms to explain the...."
• Why did you choose this kind of research study or design? Provide a clear statement of the rationale for your approach to the problem studied. This will usually follow your statement of purpose in the last paragraph of the introduction.

IV.  Engaging the Reader

A research problem in the social sciences can come across as dry and uninteresting to anyone unfamiliar with the topic . Therefore, one of the goals of your introduction is to make readers want to read your paper. Here are several strategies you can use to grab the reader's attention:

• Open with a compelling story . Almost all research problems in the social sciences, no matter how obscure or esoteric , are really about the lives of people. Telling a story that humanizes an issue can help illuminate the significance of the problem and help the reader empathize with those affected by the condition being studied.
• Include a strong quotation or a vivid, perhaps unexpected, anecdote . During your review of the literature, make note of any quotes or anecdotes that grab your attention because they can used in your introduction to highlight the research problem in a captivating way.
• Pose a provocative or thought-provoking question . Your research problem should be framed by a set of questions to be addressed or hypotheses to be tested. However, a provocative question can be presented in the beginning of your introduction that challenges an existing assumption or compels the reader to consider an alternative viewpoint that helps establish the significance of your study. 
• Describe a puzzling scenario or incongruity . This involves highlighting an interesting quandary concerning the research problem or describing contradictory findings from prior studies about a topic. Posing what is essentially an unresolved intellectual riddle about the problem can engage the reader's interest in the study.
• Cite a stirring example or case study that illustrates why the research problem is important . Draw upon the findings of others to demonstrate the significance of the problem and to describe how your study builds upon or offers alternatives ways of investigating this prior research.

NOTE:   It is important that you choose only one of the suggested strategies for engaging your readers. This avoids giving an impression that your paper is more flash than substance and does not distract from the substance of your study.

Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. University College Writing Centre. University of Toronto; Introduction . The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Introductions . The Writing Center. University of North Carolina; Introductions . The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Introductions, Body Paragraphs, and Conclusions for an Argument Paper . The Writing Lab and The OWL. Purdue University; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Resources for Writers: Introduction Strategies . Program in Writing and Humanistic Studies. Massachusetts Institute of Technology; Sharpling, Gerald. Writing an Introduction . Centre for Applied Linguistics, University of Warwick; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Swales, John and Christine B. Feak. Academic Writing for Graduate Students: Essential Skills and Tasks . 2nd edition. Ann Arbor, MI: University of Michigan Press, 2004 ; Writing Your Introduction . Department of English Writing Guide. George Mason University.

Writing Tip

Avoid the "Dictionary" Introduction

Giving the dictionary definition of words related to the research problem may appear appropriate because it is important to define specific terminology that readers may be unfamiliar with. However, anyone can look a word up in the dictionary and a general dictionary is not a particularly authoritative source because it doesn't take into account the context of your topic and doesn't offer particularly detailed information. Also, placed in the context of a particular discipline, a term or concept may have a different meaning than what is found in a general dictionary. If you feel that you must seek out an authoritative definition, use a subject specific dictionary or encyclopedia [e.g., if you are a sociology student, search for dictionaries of sociology]. A good database for obtaining definitive definitions of concepts or terms is Credo Reference .

Saba, Robert. The College Research Paper . Florida International University; Introductions . The Writing Center. University of North Carolina.

Another Writing Tip

When Do I Begin?

A common question asked at the start of any paper is, "Where should I begin?" An equally important question to ask yourself is, "When do I begin?" Research problems in the social sciences rarely rest in isolation from history. Therefore, it is important to lay a foundation for understanding the historical context underpinning the research problem. However, this information should be brief and succinct and begin at a point in time that illustrates the study's overall importance. For example, a study that investigates coffee cultivation and export in West Africa as a key stimulus for local economic growth needs to describe the beginning of exporting coffee in the region and establishing why economic growth is important. You do not need to give a long historical explanation about coffee exports in Africa. If a research problem requires a substantial exploration of the historical context, do this in the literature review section. In your introduction, make note of this as part of the "roadmap" [see below] that you use to describe the organization of your paper.

Introductions . The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70.

Yet Another Writing Tip

Always End with a Roadmap

The final paragraph or sentences of your introduction should forecast your main arguments and conclusions and provide a brief description of the rest of the paper [the "roadmap"] that let's the reader know where you are going and what to expect. A roadmap is important because it helps the reader place the research problem within the context of their own perspectives about the topic. In addition, concluding your introduction with an explicit roadmap tells the reader that you have a clear understanding of the structural purpose of your paper. In this way, the roadmap acts as a type of promise to yourself and to your readers that you will follow a consistent and coherent approach to addressing the topic of inquiry. Refer to it often to help keep your writing focused and organized.

Cassuto, Leonard. “ On the Dissertation: How to Write the Introduction .” The Chronicle of Higher Education , May 28, 2018; Radich, Michael. A Student's Guide to Writing in East Asian Studies . (Cambridge, MA: Harvard University Writing n. d.), pp. 35-37.

• << Previous: Paragraph Development
• Next: The C.A.R.S. Model >>
• Last Updated: Sep 8, 2023 12:19 PM
• URL: https://guides.library.txstate.edu/socialscienceresearch

We've updated our Privacy Policy to make it clearer how we use your personal data. We use cookies to provide you with a better experience. You can read our Cookie Policy here.

Informatics

Stay up to date on the topics that matter to you

Scientific Journal Publishes Paper With AI-Generated Introduction

A high-profile journal has published a paper featuring an ai-generated introductory sentence..

Complete the form below to unlock access to ALL audio articles.

A peer-reviewed scientific paper has gathered significant attention on the social media platform X (formerly Twitter), albeit for unfavorable reasons.

Published in Elsevier’s Surfaces and Interfaces journal, the first line of said paper’s introduction reads: “ Certainly, here is a possible introduction for your topic” .

If you’ve had any interaction with ChatGPT or other large language models (LLMs), you’re likely well acquainted with this phrasing.

It suggests that AI-assisted technologies have been utilized in writing the manuscript, titled: The three-dimensional porous mesh structure of Cu-based metal-organic-framework - aramid cellulose separator enhances the electrochemical performance of lithium metal anode batteries .

Though Elsevier does not condemn the adoption of AI and AI-assisted technologies in manuscript writing, its policies do require that authors disclose this information.

“We ask authors who have used AI or AI-assisted tools to insert a statement at the end of their manuscript immediately above the references or bibliography entitled ‘Declaration of AI and AI-assisted technologies in the writing process’. In that statement, we ask authors to specify the tool that was used and the reason for using the tool,” the journal’s website reads .

Despite the clear-cut evidence that LLMs have been used, the authors – Zhang et al. – failed to include such statement, which begs the question: how has this paper survived the processes preceding peer-review, peer-review itself and, finally, publication?

Want more breaking news?

Subscribe to Technology Networks ’ daily newsletter, delivering breaking science news straight to your inbox every day.

Elsevier has responded via X, stating, “Our policies are clear that LLMs can be used in the drafting of papers as long as it is declared by the authors on submission. We are investigating this paper and are in discussion with editorial team and the authors.” The journal has not yet released any further information.

The viral X thread features members of the scientific community expressing their frustration and disappointment with the situation. It also highlights other instances where LLM-generated text features in peer-reviewed journals, some of which are several months old and appear to have not yet been addressed.  

AI’s future in scientific publishing

The controversial Elsevier paper comes at a time when the value, risks and ethical implications of using AI in scientific publishing are under constant evaluation.

While some tout the benefits of AI-assisted plagiarism detection, text optimization and the tailoring of articles, others heed caution at the technologies’ potential to introduce factual inaccuracies, debates surrounding authorship and biases into the literature.

At Technology Networks, we want to hear from you – what do you think about the use of AI and AI-assisted tools in scientific publication?

The Ethical Implications of AI in Scientific Publishing