dissertation abstract word count

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 8 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

Frequently asked questions

How long is a dissertation abstract.

An abstract for a thesis or dissertation is usually around 200–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

Frequently asked questions: Dissertation

Dissertation word counts vary widely across different fields, institutions, and levels of education:

• An undergraduate dissertation is typically 8,000–15,000 words
• A master’s dissertation is typically 12,000–50,000 words
• A PhD thesis is typically book-length: 70,000–100,000 words

However, none of these are strict guidelines – your word count may be lower or higher than the numbers stated here. Always check the guidelines provided by your university to determine how long your own dissertation should be.

A dissertation prospectus or proposal describes what or who you plan to research for your dissertation. It delves into why, when, where, and how you will do your research, as well as helps you choose a type of research to pursue. You should also determine whether you plan to pursue qualitative or quantitative methods and what your research design will look like.

It should outline all of the decisions you have taken about your project, from your dissertation topic to your hypotheses and research objectives , ready to be approved by your supervisor or committee.

Note that some departments require a defense component, where you present your prospectus to your committee orally.

A thesis is typically written by students finishing up a bachelor’s or Master’s degree. Some educational institutions, particularly in the liberal arts, have mandatory theses, but they are often not mandatory to graduate from bachelor’s degrees. It is more common for a thesis to be a graduation requirement from a Master’s degree.

Even if not mandatory, you may want to consider writing a thesis if you:

• Plan to attend graduate school soon
• Have a particular topic you’d like to study more in-depth
• Are considering a career in research
• Would like a capstone experience to tie up your academic experience

The conclusion of your thesis or dissertation should include the following:

• A restatement of your research question
• A summary of your key arguments and/or results
• A short discussion of the implications of your research

The conclusion of your thesis or dissertation shouldn’t take up more than 5–7% of your overall word count.

For a stronger dissertation conclusion , avoid including:

• Important evidence or analysis that wasn’t mentioned in the discussion section and results section
• Generic concluding phrases (e.g. “In conclusion …”)
• Weak statements that undermine your argument (e.g., “There are good points on both sides of this issue.”)

Your conclusion should leave the reader with a strong, decisive impression of your work.

While it may be tempting to present new arguments or evidence in your thesis or disseration conclusion , especially if you have a particularly striking argument you’d like to finish your analysis with, you shouldn’t. Theses and dissertations follow a more formal structure than this.

All your findings and arguments should be presented in the body of the text (more specifically in the discussion section and results section .) The conclusion is meant to summarize and reflect on the evidence and arguments you have already presented, not introduce new ones.

A theoretical framework can sometimes be integrated into a  literature review chapter , but it can also be included as its own chapter or section in your dissertation . As a rule of thumb, if your research involves dealing with a lot of complex theories, it’s a good idea to include a separate theoretical framework chapter.

A literature review and a theoretical framework are not the same thing and cannot be used interchangeably. While a theoretical framework describes the theoretical underpinnings of your work, a literature review critically evaluates existing research relating to your topic. You’ll likely need both in your dissertation .

While a theoretical framework describes the theoretical underpinnings of your work based on existing research, a conceptual framework allows you to draw your own conclusions, mapping out the variables you may use in your study and the interplay between them.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

In most styles, the title page is used purely to provide information and doesn’t include any images. Ask your supervisor if you are allowed to include an image on the title page before doing so. If you do decide to include one, make sure to check whether you need permission from the creator of the image.

Include a note directly beneath the image acknowledging where it comes from, beginning with the word “ Note .” (italicized and followed by a period). Include a citation and copyright attribution . Don’t title, number, or label the image as a figure , since it doesn’t appear in your main text.

Definitional terms often fall into the category of common knowledge , meaning that they don’t necessarily have to be cited. This guidance can apply to your thesis or dissertation glossary as well.

However, if you’d prefer to cite your sources , you can follow guidance for citing dictionary entries in MLA or APA style for your glossary.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, an index is a list of the contents of your work organized by page number.

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

The title page of your thesis or dissertation should include your name, department, institution, degree program, and submission date.

Glossaries are not mandatory, but if you use a lot of technical or field-specific terms, it may improve readability to add one to your thesis or dissertation. Your educational institution may also require them, so be sure to check their specific guidelines.

A glossary or “glossary of terms” is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. Your glossary only needs to include terms that your reader may not be familiar with, and is intended to enhance their understanding of your work.

A glossary is a collection of words pertaining to a specific topic. In your thesis or dissertation, it’s a list of all terms you used that may not immediately be obvious to your reader. In contrast, dictionaries are more general collections of words.

An abbreviation is a shortened version of an existing word, such as Dr. for Doctor. In contrast, an acronym uses the first letter of each word to create a wholly new word, such as UNESCO (an acronym for the United Nations Educational, Scientific and Cultural Organization).

As a rule of thumb, write the explanation in full the first time you use an acronym or abbreviation. You can then proceed with the shortened version. However, if the abbreviation is very common (like PC, USA, or DNA), then you can use the abbreviated version from the get-go.

Be sure to add each abbreviation in your list of abbreviations !

If you only used a few abbreviations in your thesis or dissertation , you don’t necessarily need to include a list of abbreviations .

If your abbreviations are numerous, or if you think they won’t be known to your audience, it’s never a bad idea to add one. They can also improve readability, minimizing confusion about abbreviations unfamiliar to your reader.

A list of abbreviations is a list of all the abbreviations that you used in your thesis or dissertation. It should appear at the beginning of your document, with items in alphabetical order, just after your table of contents .

Your list of tables and figures should go directly after your table of contents in your thesis or dissertation.

Lists of figures and tables are often not required, and aren’t particularly common. They specifically aren’t required for APA-Style, though you should be careful to follow their other guidelines for figures and tables .

If you have many figures and tables in your thesis or dissertation, include one may help you stay organized. Your educational institution may require them, so be sure to check their guidelines.

A list of figures and tables compiles all of the figures and tables that you used in your thesis or dissertation and displays them with the page number where they can be found.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

You may acknowledge God in your dissertation acknowledgements , but be sure to follow academic convention by also thanking the members of academia, as well as family, colleagues, and friends who helped you.

A literature review is a survey of credible sources on a topic, often used in dissertations , theses, and research papers . Literature reviews give an overview of knowledge on a subject, helping you identify relevant theories and methods, as well as gaps in existing research. Literature reviews are set up similarly to other  academic texts , with an introduction , a main body, and a conclusion .

An  annotated bibliography is a list of  source references that has a short description (called an annotation ) for each of the sources. It is often assigned as part of the research process for a  paper .  

In a thesis or dissertation, the discussion is an in-depth exploration of the results, going into detail about the meaning of your findings and citing relevant sources to put them in context.

The conclusion is more shorter and more general: it concisely answers your main research question and makes recommendations based on your overall findings.

In the discussion , you explore the meaning and relevance of your research results , explaining how they fit with existing research and theory. Discuss:

• Your  interpretations : what do the results tell us?
• The  implications : why do the results matter?
• The  limitation s : what can’t the results tell us?

The results chapter or section simply and objectively reports what you found, without speculating on why you found these results. The discussion interprets the meaning of the results, puts them in context, and explains why they matter.

In qualitative research , results and discussion are sometimes combined. But in quantitative research , it’s considered important to separate the objective results from your interpretation of them.

Results are usually written in the past tense , because they are describing the outcome of completed actions.

The results chapter of a thesis or dissertation presents your research results concisely and objectively.

In quantitative research , for each question or hypothesis , state:

• The type of analysis used
• Relevant results in the form of descriptive and inferential statistics
• Whether or not the alternative hypothesis was supported

In qualitative research , for each question or theme, describe:

• Recurring patterns
• Significant or representative individual responses
• Relevant quotations from the data

Don’t interpret or speculate in the results chapter.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

The abstract appears on its own page in the thesis or dissertation , after the title page and acknowledgements but before the table of contents .

In a thesis or dissertation, the acknowledgements should usually be no longer than one page. There is no minimum length.

The acknowledgements are generally included at the very beginning of your thesis , directly after the title page and before the abstract .

Yes, it’s important to thank your supervisor(s) in the acknowledgements section of your thesis or dissertation .

Even if you feel your supervisor did not contribute greatly to the final product, you must acknowledge them, if only for a very brief thank you. If you do not include your supervisor, it may be seen as a snub.

In the acknowledgements of your thesis or dissertation, you should first thank those who helped you academically or professionally, such as your supervisor, funders, and other academics.

Then you can include personal thanks to friends, family members, or anyone else who supported you during the process.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How Long Should an Abstract Be? Word Count & Length

The abstract is perhaps the most important section of your research paper. Apart from the title, it may be the only part of the paper anyone reads. Whether they read further  depends in part on how good an impression your abstract makes .

The abstract may also be the only part of your paper that has a word limit. Most word limits specify a maximum of  between 250 and 300 words , and some journals require that abstracts be as short as 150 words. Writing a great abstract is almost an art—but writing an abstract that meets word limits is, well, a  science .

 Why do journals impose abstract word limits?

There are several reasons your abstract needs to be short and concise. Journals want readers to buy your article, and they want other researchers to cite your study in their own articles. More citations means a higher impact factor for the journal. The best way to sell your study is to grab the reader’s attention with a great title and abstract. Finally, there is the issue of space. Journals want your abstract to fit on half a page so that a reader won’t have to scroll to read all of it.

When it comes to abstracts, less is more. Only essential information needs to be presented. A short, powerful abstract will draw readers into your research and help the journal attract more readers and receive more citations. The trick is how to trim your abstract to get under the word limit. Here are some time- and researcher-tested ways to pull that off.

Omit Needless Words and Adverbs

In their acclaimed guide to English writing,  The Elements of Style , William Strunk, Jr, and E. B. White teach the key to meeting abstract word limits: Omit needless words. Many writers, especially academic writers, pepper their writing with words that simply don’t need to be there.

A “hedge” is a word or phrase you use when you are concerned about making a claim instead of stating a fact. It’s always a good idea to be careful, especially in academic writing, but many authors use hedge words when they don’t need to. Among the most overused hedge words are the verbs “seem” and “appear.” In the examples below, you’ll see why taking away the hedge words does not alter the meaning.

Hedge : Maroney syndrome  seems   to impair quality of life. No Hedge : Maroney syndrome  impairs   quality of life.

Hedge : Ibuprofen  appears   to diminish pain in most patients. No Hedge : Ibuprofen  diminishes   pain in most patients.

In both pairs, the first and second sentences have essentially the same meaning, except that the second sentence omits the hedge word. Notice how the second examples are more powerful and straightforward without this extra verbiage.

Cutting out needless adverbs is another easy way to limit the number of words in an abstract.

With needless adverbs : We  slowly and carefully  dissected the vagus nerve. Without needless adverbs : We dissected the vagus nerve.

By definition, “dissection” is slow and careful (or  should  be!). Removing the needless adverbs “slowly” and “carefully’ leaves you with a sentence with the same meaning and three fewer words. Same your adverbs for situations in which they truly impact the meaning or have an impact on the reader or interpretation.

Remove Awkward and Unnecessary Transitions

Conjunctive adverbs are better known as “ transition terms ,” and although they can be very useful in creating structure and flow within the body of a paper, in the abstract they are often redundant or even incorrectly used. Among the more commonly used conjunctive adverbs are: however, moreover, therefore, furthermore, additionally, and thus.

The conjunction “moreover” is perhaps the most commonly used needless adverb in scientific papers. Some writers use it because they believe it makes them sound more “academic.” Others use it because they may know that it’s a grammatical faux-pas to start a sentence with the conjunction “And.” Nevertheless, “moreover” can virtually  always  be removed from a sentence without altering the meaning. Watch what happens when we remove the word “moreover from these sentences.

With a transition :  Moreover , we dissected the vagus nerve. Without a transition : We dissected the vagus nerve.

In the instance above, “moreover” does not really make sense as a transition term. Even other transition terms (furthermore, therefore, in addition, etc.) would be somewhat unnecessary when discussing how the study or experiment was performed.

With a transition :  Furthermore , patients with Boney-Maroney syndrome are likely to experience hot flashes and fatigue. Without a transition : Patients with Boney-Maroney syndrome are likely to experience hot flashes and fatigue.

Note that these two sentences have exactly the same meaning with and without the transition term “furthermore.”  These transitions can be much more useful in the longer sections of the paper’s body, especially in the Introduction and Discussion/Conclusion sections.

Use the Active Voice Instead of Passive Voice

One way to shorten your abstract is to apply a rule you might have learned in primary school: use active voice instead of passive voice . In active voice constructions, the subject carries the action. In passive voice, the subject is acted upon, usually by an unnamed actor. Scientists seem to be in love with the passive voice, as it can be found in many papers, simply adding to the word count and making the writing less engaging. Because of this longstanding convention, many believe it makes them sound more “scientific.” Others shun active voice because they feel as though it is too personal. That is a shame. Your sentences will often sound more convincing and powerful in active voice, as the following examples demonstrate:

Passive voice : Pituitary cells  were grown  in dishes that had been subjected to irradiation (12 words). Active voice :  We grew  pituitary cells in irradiated dishes (7 words). Passive voice : Three-hundred and forty-five patients  who had undergone  ovariectomy at our institution  were enrolled  in the present study (17 words). Active voice :  We enrolled   345 patients whom we had ovariectomized (eight words).

Remember, studies don’t conduct themselves;  scientists  conduct studies. Avoid using the passive voice in the abstract—save it for the Methods section!

Do not Include Statistical Methods or Findings in the Abstract

Most scientific articles include statistics. Usually, the statistical methods are described in detail in the Methods section of a paper. But many authors feel compelled for some reason to mention statistics in the abstract, perhaps to get the details out first. But unless your paper is primarily about statistics, it is best to keep statistics out of the abstract and stick to language that expresses the most important use and findings of the study. Not only do statistics add to your word count, but they also interrupt the flow of your argument. You certainly do not need to tell the reader what statistical tests you used or the version of the statistics program you used—that is what the Methods section is for. And never go into detail about EXACTLY which findings your study yielded—that is what the Results section is for.

Consent, Approval, and Other Info That Doesn’t Belong in an Abstract

Some authors place information about patient consent and institutional review board approval in the abstract. Whereas this information is indeed essential, it is not necessary to put it in the abstract. Like statistics, consent and approval statements interrupt the flow of your argument. Readers expect to find information about consent and approval in the Methods section. Leaving this out of your abstract will certainly free up your space to describe the importance of your study.

Abstract Word Limits Are not Targets

Keep in mind that a limit of 250 words does not mean that you should attempt to come as close as possible to the limit. The best abstracts include all essential information well before reaching word limit. Use the above tips to help you create a leaner, tighter abstract that will hook readers and entice them to read your full study.

For more helpful suggestions on academic and research writing, check out the links below or visit the Wordvice Academic Resources page. And be sure to receive professional  English editing services , including  paper editing services , for your journal manuscript before submitting it to journal editors.

Wordvice Resources

• Writing the Results Section for a Research Paper
• How to Write a Literature Review
• Research Writing Tips: How to Draft a Powerful Discussion Section
• How to Captivate Journal Readers with a Strong Introduction
• Tips That Will Make Your Abstract a Success!
• APA In-Text Citation Guide for Research Writing
•   “Abstract Guide for Research Papers.”  (Academic Conferences and Publishing International Limited)
• “How many words should be in the abstract?”  (Research Gate)
• Strunk and White.  The Elements of Style. ( PDF)
• “Organizing Your Social Science Research Paper: The Abstract.”  (USC Libraries)

Writing the Dissertation - Guides for Success: The Abstract

• Writing the Dissertation Homepage
• Overview and Planning
• The Literature Review
• The Methodology
• The Results and Discussion
• The Conclusion
• The Abstract
• An abstract is a brief summary of an academic text.
• Researchers use abstracts to make an informed decision of whether an article, dissertation or other academic text is relevant or applicable to their own work.
• Conventions for the content and structure of abstracts vary by field, so general guidance should be adjusted to match best practices of published writers in your discipline.

What is an abstract?

An  abstract  is a concise summary of an academic text such as a journal article, dissertation or thesis. It provides a 'snapshot' view of the overall text, from the research question through to the conclusion.

In thinking about how to write an abstract, it's helpful to consider why we  read  abstracts. We usually encounter abstracts while searching databases for articles to reference in our own research. Before we commit to reading the full-text of an article, we want to gauge whether that article will make a relevant contribution to our work or thinking. The abstract helps us make that decision by providing a quick, 'boiled down' preview of the entire piece.

In that sense, an abstract of an academic text can be likened to the trailer for a movie. Just as a movie trailer informs your choice to see or skip a certain film, an abstract can inform your choice to read or skip an academic text. However, unlike a movie trailer, an abstract  should  contain 'spoilers' (i.e., the key conclusions of the writing).

Standard criteria for an abstract

• Word count  –   The average abstract is about 200 words, but you should adjust this figure to match the context in which you are writing. For example, if submitting an article to a journal, you should follow that journal's publishing guidelines. Similarly, your school/faculty may suggest a word count for dissertation abstracts.
• Able to stand alone  – A reader should understand the key elements of your research or argument from the abstract itself. In other words, the abstract should make sense as an independent piece of writing even to those who haven't read the report/research that follows.
• Audience aware  – Because the main audience for your abstract will be other researchers in your field, you can use discipline-specific jargon or language as needed. You only need to 'rein in' the specialist language if you are writing for the general public rather than fellow researchers.

As a rule of thumb, the abstract will mirror the structure of the piece of writing that it is summarising. However, it will compress the 'main beats' into a single paragraph (rarely will an abstract be formatted as more than one paragraph). Therefore, one common structure for an abstract is as follows:

• Context  – Relevant research background (think of this like a literature review condensed into one or two sentences).
• Objective statement/research question  – What your research aims to do and/or what it sets out to answer.
• Methodology  – How your research was carried out (cut the minute detail and stick to broad strokes).
• Results  – What your methodology produced.
• Discussion  – Interpretation of your results, often in relation to the wider discourse or prior research.
• Implications/future research  – If relevant, an indication of your research's impact and/or suggestions for future study.
• Conclusion  – The takeaway or answer to the question, 'So what?'

Our Writing Abstracts video provides examples and explanations of how abstracts vary between academic disciplines (e.g. humanities, sciences, social sciences, arts, etc.), so please check it out to explore expectations in your subject area.  Our  Writing Across Subjects guide  provides further guidance for some fields.

The writing process

• Don't be afraid to overwrite, first.  You can always cut back, cut back, and cut back some more, so when writing your first draft of the abstract, don't worry about the word count.
• Pare anything superfluous.  Edit ruthlessly once you have that first draft. Treat adverbs with suspicion ('strongly suggests' = 'suggests', 'carefully analysed' = 'analysed', and so on). Use a thesaurus or phrase dictionary to find one-word substitutes for multi-word phrases. Be prepared to go through many rounds of culling!
• Share it.  Get someone unfamiliar with your research to read your abstract and then explain your project back to you. If this exercise goes well, you are on the right track.
• What/why/who/how?  You can produce a starting place for your abstract by answering these questions: what did you do; why did you do it; who else is doing similar things; how did you do it? Imagine someone has asked the questions in a lift – therefore, you have to keep your answers brief (i.e., a literal 'elevator pitch' of your work).

Abstracts for dissertations and theses

The above guidance all applies when writing the abstract for your dissertation or thesis. Remember to keep your subject area in mind and tailor your abstract to the expectations of your discipline.

The university provides Word templates to help you format your entire submission, including a dedicated page for your abstract. Access the dissertation template here, or access the  thesis template here.

For help producing the other sections of a long academic work, check out our Writing the Dissertation: Guides for Success resources,   which include guides, video workshops, checklists and more.

• << Previous: The Conclusion
• Last Updated: Feb 22, 2024 3:43 PM
• URL: https://library.soton.ac.uk/writing_the_dissertation

• Cookies & Privacy
• GETTING STARTED
• Introduction
• FUNDAMENTALS
• Acknowledgements
• Research questions & hypotheses
• Concepts, constructs & variables
• Research limitations
• Getting started
• Sampling Strategy
• Research Quality
• Research Ethics
• Data Analysis

How to structure your dissertation abstract

Abstracts written for undergraduate and master's level dissertations have a number of structural components [ NOTE ]. Even though every dissertation is different, these structural components are likely to be relevant for most dissertations. When writing the dissertation abstract, the most important thing to remember is why your research was significant. This should have been clearly explained in the introductory chapter of your dissertation ( Chapter One: Introduction ). Understanding the significance of your research is important because how much you write for each component of the abstract (in terms of word count or number of sentences) will depend on the relative importance of each of these components to your research.

There are four major structural components, which aim to let the reader know about the background to and significance of your study, the research strategy being followed, the findings of the research, and the conclusions that were made. You should write one or a number of sentences for each of these components, with each making up a part of the 150 to 350 words that are typically written in dissertation abstracts. This section sets out and explains these structural components. These four major components are:

• COMPONENT #1: Study background and significance
• COMPONENT #2: Components of your research strategy
• COMPONENT #3: Findings
• COMPONENT #4: Conclusions

COMPONENT #1 Study background and significance

The first few sentences of the dissertation abstract highlight the background to your research, as well as the significance of the study. Hopefully, by the time you come to write the abstract, you will already know why your study is significant.

In explaining the significance of your study, you will also need to provide some context for your research. This includes the problem that you are addressing and your motivation for conducting the study. In building the background to the study, this part of the abstract should address questions such as:

What is the purpose of the research?

Why did you carry out the research?

How is the study significant? Why should anyone care or why do they care (is the study interesting)?

Remember, all of this needs to be encompassed within just a few sentences. Therefore, only outline those aspects of your study that you feel are the most important; those aspects that you think will catch the reader's attention.

COMPONENT #2 Components of your research strategy

The relative importance of the methodological components discussed in the dissertation abstract will depend on whether any of these components made the study significant in some way. Ask yourself the question: Did any of the following components of research strategy help make my study significant?

The broad research design (e.g., qualitative, quantitative, mixed, etc.)

The type of research design (e.g., experimental research, case study approach, grounded theory, ethnography, etc.)

The research methods (e.g., survey, interviews, focus groups, observation, etc.)

The analytical techniques used (e.g., content analysis, statistical analyses, etc.)

If the answer is YES , greater focus (and word count) should probably be dedicated to explaining these components of research strategy in the dissertation abstract. If not, try and summarise the components used more succinctly (i.e., in fewer words). Since the way that you would write the research strategy part of your dissertation abstract will vary depending on the relative significance of these components to your study, we have produced examples to help.

In explaining the approach to research strategy that you adopted in this part of your dissertation abstract, addressing some of the following questions may help:

What research design guided your study?

What was the scope of your study?

What research methods did you use?

What were the main ideas, constructs and/or variables that you examined, measured, controlled and/or ignored?

What was your unit of analysis?

What was your sample (and population)?

What analysis techniques did you use to arrive at your findings?

Often, you will be able to combine the answer to a number of these questions in a single sentence, which will help make the abstract more concise and succinct.

COMPONENT #3 Major findings

Following a discussion of the components of your research strategy, the dissertation abstract should move on to present the main findings from your research. We use the word findings and not results to emphasise the fact that the abstract is not the section where you should include lots of data; and it should definitely not include any analysis. Leave this to the Results/Findings chapter of your dissertation (often Chapter Four: Results/Findings ). Remember that the findings part of the dissertation abstract should focus on answering your research questions and/or hypotheses.

It may help to answer some of the following questions in order to write this part of the dissertation abstract:

Did the findings answer your research questions and/or hypotheses?

What did the findings show in terms of these research questions and/or hypotheses?

What are the most important findings?

What is the significance of your findings?

To what extent are your findings trustworthy (i.e., reliable, generalisable, consistent, dependable, etc.)?

You should avoid making comments that are vague or over-exaggerate your findings. You should also ensure that you explain the findings in a way that non-experts could understand without having to read additional parts of your dissertation.

COMPONENT #4 Conclusions

The final part of your dissertation abstract should focus on the conclusions from your research and the resultant implications. Bearing in mind the findings that have just been discussed, you need to address questions such as:

What has been learned?

What are the implications of the findings?

Is there potential for generalisation of your findings?

What are the limitations of your research?

When writing the conclusion part of your abstract, remember that these conclusions should be precise and concise. There is no need to re-summarise what you have already discussed or the contents of your dissertation. This is an informative abstract, not a descriptive one. If you are unsure of the difference, you may find the section, Choosing between dissertation abstract styles: Descriptive and informative , helpful. Furthermore, be careful not to make claims that cannot be supported by your findings. There is always a danger to over-exaggerate and/or over-generalise in this part of the abstract, which should be avoided. It is unlikely that you will have changed the world through your study, but you may still have added something significant to the literature, so try and strike the right balance.

NOTE: This article is based on the use of the informative abstract style, not the descriptive style; the former being the typical style adopted in undergraduate and master's dissertations and theses. For a comparison of the two styles - descriptive and informative - see the article, Choosing between dissertation abstract styles: Descriptive or informative .

In the next section, Useful phrases when writing a dissertation abstract , we set out some phrases that you may find useful when writing up your dissertation abstract.

• Formatting Your Dissertation
• Introduction

Harvard Griffin GSAS strives to provide students with timely, accurate, and clear information. If you need help understanding a specific policy, please contact the office that administers that policy.

• Application for Degree
• Credit for Completed Graduate Work
• Ad Hoc Degree Programs
• Acknowledging the Work of Others
• Advanced Planning
• Dissertation Submission Checklist
• Publishing Options
• Submitting Your Dissertation
• English Language Proficiency
• PhD Program Requirements
• Secondary Fields
• Year of Graduate Study (G-Year)
• Master's Degrees
• Grade and Examination Requirements
• Conduct and Safety
• Financial Aid
• Non-Resident Students
• Registration

On this page:

Language of the Dissertation

Page and text requirements, body of text, tables, figures, and captions, dissertation acceptance certificate, copyright statement.

• Table of Contents

Front and Back Matter

Supplemental material, dissertations comprising previously published works, top ten formatting errors, further questions.

• Related Contacts and Forms

When preparing the dissertation for submission, students must follow strict formatting requirements. Any deviation from these requirements may lead to rejection of the dissertation and delay in the conferral of the degree.

The language of the dissertation is ordinarily English, although some departments whose subject matter involves foreign languages may accept a dissertation written in a language other than English.

Most dissertations are 100 to 300 pages in length. All dissertations should be divided into appropriate sections, and long dissertations may need chapters, main divisions, and subdivisions.

• 8½ x 11 inches, unless a musical score is included
• At least 1 inch for all margins
• Body of text: double spacing
• Block quotations, footnotes, and bibliographies: single spacing within each entry but double spacing between each entry
• Table of contents, list of tables, list of figures or illustrations, and lengthy tables: single spacing may be used

Fonts and Point Size

Use 10-12 point size. Fonts must be embedded in the PDF file to ensure all characters display correctly. 

Recommended Fonts

If you are unsure whether your chosen font will display correctly, use one of the following fonts: 

If fonts are not embedded, non-English characters may not appear as intended. Fonts embedded improperly will be published to DASH as-is. It is the student’s responsibility to make sure that fonts are embedded properly prior to submission. 

Instructions for Embedding Fonts

To embed your fonts in recent versions of Word, follow these instructions from Microsoft:

• Click the File tab and then click Options .
• In the left column, select the Save tab.
• Clear the Do not embed common system fonts check box.

For reference, below are some instructions from ProQuest UMI for embedding fonts in older file formats:

To embed your fonts in Microsoft Word 2010:

• In the File pull-down menu click on Options .
• Choose Save on the left sidebar.
• Check the box next to Embed fonts in the file.
• Click the OK button.
• Save the document.

Note that when saving as a PDF, make sure to go to “more options” and save as “PDF/A compliant”

To embed your fonts in Microsoft Word 2007:

• Click the circular Office button in the upper left corner of Microsoft Word.
• A new window will display. In the bottom right corner select Word Options . 
• Choose Save from the left sidebar.

Using Microsoft Word on a Mac:

Microsoft Word 2008 on a Mac OS X computer will automatically embed your fonts while converting your document to a PDF file.

If you are converting to PDF using Acrobat Professional (instructions courtesy of the Graduate Thesis Office at Iowa State University):  

• Open your document in Microsoft Word. 
• Click on the Adobe PDF tab at the top. Select "Change Conversion Settings." 
• Click on Advanced Settings. 
• Click on the Fonts folder on the left side of the new window. In the lower box on the right, delete any fonts that appear in the "Never Embed" box. Then click "OK." 
• If prompted to save these new settings, save them as "Embed all fonts." 
• Now the Change Conversion Settings window should show "embed all fonts" in the Conversion Settings drop-down list and it should be selected. Click "OK" again. 
• Click on the Adobe PDF link at the top again. This time select Convert to Adobe PDF. Depending on the size of your document and the speed of your computer, this process can take 1-15 minutes. 
• After your document is converted, select the "File" tab at the top of the page. Then select "Document Properties." 
• Click on the "Fonts" tab. Carefully check all of your fonts. They should all show "(Embedded Subset)" after the font name. 
•  If you see "(Embedded Subset)" after all fonts, you have succeeded.

The font used in the body of the text must also be used in headers, page numbers, and footnotes. Exceptions are made only for tables and figures created with different software and inserted into the document.

Tables and figures must be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or they may be placed directly into the text. If a table or a figure is alone on a page (with no narrative), it should be centered within the margins on the page. Tables may take up more than one page as long as they obey all rules about margins. Tables and figures referred to in the text may not be placed at the end of the chapter or at the end of the dissertation.

• Given the standards of the discipline, dissertations in the Department of History of Art and Architecture and the Department of Architecture, Landscape Architecture, and Urban Planning often place illustrations at the end of the dissertation.

Figure and table numbering must be continuous throughout the dissertation or by chapter (e.g., 1.1, 1.2, 2.1, 2.2, etc.). Two figures or tables cannot be designated with the same number. If you have repeating images that you need to cite more than once, label them with their number and A, B, etc. 

Headings should be placed at the top of tables. While no specific rules for the format of table headings and figure captions are required, a consistent format must be used throughout the dissertation (contact your department for style manuals appropriate to the field).

Captions should appear at the bottom of any figures. If the figure takes up the entire page, the caption should be placed alone on the preceding page, centered vertically and horizontally within the margins.

Each page receives a separate page number. When a figure or table title is on a preceding page, the second and subsequent pages of the figure or table should say, for example, “Figure 5 (Continued).” In such an instance, the list of figures or tables will list the page number containing the title. The word “figure” should be written in full (not abbreviated), and the “F” should be capitalized (e.g., Figure 5). In instances where the caption continues on a second page, the “(Continued)” notation should appear on the second and any subsequent page. The figure/table and the caption are viewed as one entity and the numbering should show correlation between all pages. Each page must include a header.

Landscape orientation figures and tables must be positioned correctly and bound at the top so that the top of the figure or table will be at the left margin. Figure and table headings/captions are placed with the same orientation as the figure or table when on the same page. When on a separate page, headings/captions are always placed in portrait orientation, regardless of the orientation of the figure or table. Page numbers are always placed as if the figure were vertical on the page.

If a graphic artist does the figures, Harvard Griffin GSAS will accept lettering done by the artist only within the figure. Figures done with software are acceptable if the figures are clear and legible. Legends and titles done by the same process as the figures will be accepted if they too are clear, legible, and run at least 10 or 12 characters per inch. Otherwise, legends and captions should be printed with the same font used in the text.

Original illustrations, photographs, and fine arts prints may be scanned and included, centered between the margins on a page with no text above or below.

Use of Third-Party Content

In addition to the student's own writing, dissertations often contain third-party content or in-copyright content owned by parties other than you, the student who authored the dissertation. The Office for Scholarly Communication recommends consulting the information below about fair use, which allows individuals to use in-copyright content, on a limited basis and for specific purposes, without seeking permission from copyright holders.

Because your dissertation will be made available for online distribution through DASH , Harvard's open-access repository, it is important that any third-party content in it may be made available in this way.

Fair Use and Copyright 

What is fair use?

Fair use is a provision in copyright law that allows the use of a certain amount of copyrighted material without seeking permission. Fair use is format- and media-agnostic. This means fair use may apply to images (including photographs, illustrations, and paintings), quoting at length from literature, videos, and music regardless of the format. 

How do I determine whether my use of an image or other third-party content in my dissertation is fair use?  

There are four factors you will need to consider when making a fair use claim.

1) For what purpose is your work going to be used?

• Nonprofit, educational, scholarly, or research use favors fair use. Commercial, non-educational uses, often do not favor fair use.
• A transformative use (repurposing or recontextualizing the in-copyright material) favors fair use. Examining, analyzing, and explicating the material in a meaningful way, so as to enhance a reader's understanding, strengthens your fair use argument. In other words, can you make the point in the thesis without using, for instance, an in-copyright image? Is that image necessary to your dissertation? If not, perhaps, for copyright reasons, you should not include the image.  

2) What is the nature of the work to be used?

• Published, fact-based content favors fair use and includes scholarly analysis in published academic venues. 
• Creative works, including artistic images, are afforded more protection under copyright, and depending on your use in light of the other factors, may be less likely to favor fair use; however, this does not preclude considerations of fair use for creative content altogether.

3) How much of the work is going to be used?  

• Small, or less significant, amounts favor fair use. A good rule of thumb is to use only as much of the in-copyright content as necessary to serve your purpose. Can you use a thumbnail rather than a full-resolution image? Can you use a black-and-white photo instead of color? Can you quote select passages instead of including several pages of the content? These simple changes bolster your fair use of the material.

4) What potential effect on the market for that work may your use have?

• If there is a market for licensing this exact use or type of educational material, then this weighs against fair use. If however, there would likely be no effect on the potential commercial market, or if it is not possible to obtain permission to use the work, then this favors fair use. 

For further assistance with fair use, consult the Office for Scholarly Communication's guide, Fair Use: Made for the Harvard Community and the Office of the General Counsel's Copyright and Fair Use: A Guide for the Harvard Community .

What are my options if I don’t have a strong fair use claim? 

Consider the following options if you find you cannot reasonably make a fair use claim for the content you wish to incorporate:

• Seek permission from the copyright holder. 
• Use openly licensed content as an alternative to the original third-party content you intended to use. Openly-licensed content grants permission up-front for reuse of in-copyright content, provided your use meets the terms of the open license.
• Use content in the public domain, as this content is not in-copyright and is therefore free of all copyright restrictions. Whereas third-party content is owned by parties other than you, no one owns content in the public domain; everyone, therefore, has the right to use it.

For use of images in your dissertation, please consult this guide to Finding Public Domain & Creative Commons Media , which is a great resource for finding images without copyright restrictions. 

Who can help me with questions about copyright and fair use?

Contact your Copyright First Responder . Please note, Copyright First Responders assist with questions concerning copyright and fair use, but do not assist with the process of obtaining permission from copyright holders.

Pages should be assigned a number except for the Dissertation Acceptance Certificate . Preliminary pages (abstract, table of contents, list of tables, graphs, illustrations, and preface) should use small Roman numerals (i, ii, iii, iv, v, etc.). All pages must contain text or images.  

Count the title page as page i and the copyright page as page ii, but do not print page numbers on either page .

For the body of text, use Arabic numbers (1, 2, 3, 4, 5, etc.) starting with page 1 on the first page of text. Page numbers must be centered throughout the manuscript at the top or bottom. Every numbered page must be consecutively ordered, including tables, graphs, illustrations, and bibliography/index (if included); letter suffixes (such as 10a, 10b, etc.) are not allowed. It is customary not to have a page number on the page containing a chapter heading.

• Check pagination carefully. Account for all pages.

A copy of the Dissertation Acceptance Certificate (DAC) should appear as the first page. This page should not be counted or numbered. The DAC will appear in the online version of the published dissertation. The author name and date on the DAC and title page should be the same. 

The dissertation begins with the title page; the title should be as concise as possible and should provide an accurate description of the dissertation. The author name and date on the DAC and title page should be the same. 

• Do not print a page number on the title page. It is understood to be page  i  for counting purposes only.

A copyright notice should appear on a separate page immediately following the title page and include the copyright symbol ©, the year of first publication of the work, and the name of the author:

© [ year ] [ Author’s Name ] All rights reserved.

Alternatively, students may choose to license their work openly under a  Creative Commons  license. The author remains the copyright holder while at the same time granting up-front permission to others to read, share, and (depending on the license) adapt the work, so long as proper attribution is given. (By default, under copyright law, the author reserves all rights; under a Creative Commons license, the author reserves some rights.)

• Do  not  print a page number on the copyright page. It is understood to be page  ii  for counting purposes only.

An abstract, numbered as page  iii , should immediately follow the copyright page and should state the problem, describe the methods and procedures used, and give the main results or conclusions of the research. The abstract will appear in the online and bound versions of the dissertation and will be published by ProQuest. There is no maximum word count for the abstract. 

• double-spaced
• left-justified
• indented on the first line of each paragraph
• The author’s name, right justified
• The words “Dissertation Advisor:” followed by the advisor’s name, left-justified (a maximum of two advisors is allowed)
• Title of the dissertation, centered, several lines below author and advisor

Dissertations divided into sections must contain a table of contents that lists, at minimum, the major headings in the following order:

• Front Matter
• Body of Text
• Back Matter

Front matter includes (if applicable):

• acknowledgements of help or encouragement from individuals or institutions
• a dedication
• a list of illustrations or tables
• a glossary of terms
• one or more epigraphs.

Back matter includes (if applicable):

• bibliography
• supplemental materials, including figures and tables
• an index (in rare instances).

Supplemental figures and tables must be placed at the end of the dissertation in an appendix, not within or at the end of a chapter. If additional digital information (including audio, video, image, or datasets) will accompany the main body of the dissertation, it should be uploaded as a supplemental file through ProQuest ETD . Supplemental material will be available in DASH and ProQuest and preserved digitally in the Harvard University Archives.

As a matter of copyright, dissertations comprising the student's previously published works must be authorized for distribution from DASH. The guidelines in this section pertain to any previously published material that requires permission from publishers or other rightsholders before it may be distributed from DASH. Please note:

• Authors whose publishing agreements grant the publisher exclusive rights to display, distribute, and create derivative works will need to seek the publisher's permission for nonexclusive use of the underlying works before the dissertation may be distributed from DASH.
• Authors whose publishing agreements indicate the authors have retained the relevant nonexclusive rights to the original materials for display, distribution, and the creation of derivative works may distribute the dissertation as a whole from DASH without need for further permissions.

It is recommended that authors consult their publishing agreements directly to determine whether and to what extent they may have transferred exclusive rights under copyright. The Office for Scholarly Communication (OSC) is available to help the author determine whether she has retained the necessary rights or requires permission. Please note, however, the Office of Scholarly Communication is not able to assist with the permissions process itself.

• Missing Dissertation Acceptance Certificate.  The first page of the PDF dissertation file should be a scanned copy of the Dissertation Acceptance Certificate (DAC). This page should not be counted or numbered as a part of the dissertation pagination.
• Conflicts Between the DAC and the Title Page.  The DAC and the dissertation title page must match exactly, meaning that the author name and the title on the title page must match that on the DAC. If you use your full middle name or just an initial on one document, it must be the same on the other document.  
• Abstract Formatting Errors. The advisor name should be left-justified, and the author's name should be right-justified. Up to two advisor names are allowed. The Abstract should be double spaced and include the page title “Abstract,” as well as the page number “iii.” There is no maximum word count for the abstract. 
•  The front matter should be numbered using Roman numerals (iii, iv, v, …). The title page and the copyright page should be counted but not numbered. The first printed page number should appear on the Abstract page (iii). 
• The body of the dissertation should be numbered using Arabic numbers (1, 2, 3, …). The first page of the body of the text should begin with page 1. Pagination may not continue from the front matter. 
• All page numbers should be centered either at the top or the bottom of the page.
• Figures and tables Figures and tables must be placed within the text, as close to their first mention as possible. Figures and tables that span more than one page must be labeled on each page. Any second and subsequent page of the figure/table must include the “(Continued)” notation. This applies to figure captions as well as images. Each page of a figure/table must be accounted for and appropriately labeled. All figures/tables must have a unique number. They may not repeat within the dissertation.
• Any figures/tables placed in a horizontal orientation must be placed with the top of the figure/ table on the left-hand side. The top of the figure/table should be aligned with the spine of the dissertation when it is bound. 
• Page numbers must be placed in the same location on all pages of the dissertation, centered, at the bottom or top of the page. Page numbers may not appear under the table/ figure.
• Supplemental Figures and Tables. Supplemental figures and tables must be placed at the back of the dissertation in an appendix. They should not be placed at the back of the chapter. 
• Permission Letters Copyright. permission letters must be uploaded as a supplemental file, titled ‘do_not_publish_permission_letters,” within the dissertation submission tool.
•  DAC Attachment. The signed Dissertation Acceptance Certificate must additionally be uploaded as a document in the "Administrative Documents" section when submitting in Proquest ETD . Dissertation submission is not complete until all documents have been received and accepted.
• Overall Formatting. The entire document should be checked after all revisions, and before submitting online, to spot any inconsistencies or PDF conversion glitches.
• You can view dissertations successfully published from your department in DASH . This is a great place to check for specific formatting and area-specific conventions.
• Contact the  Office of Student Affairs  with further questions.

CONTACT INFO

Katie riggs, explore events.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

Dissertation Format Regulations

Please click on each of the seven headings below to see the regulations which must be followed to format your dissertation correctly:

1. Number of copies

One electronic copy must be uploaded to the Assessed Assignment Submission area, within the module section of Minerva.

A hard copy of the Dissertation is not required.  

If you need to upload any additional data in a separate document, there is an additional submission area to upload this.

2. Indicative length

The main body of the Dissertation must not exceed the word limit.

Does Count toward word count

The word count covers everything within the main text of the Dissertation, including:

• the abstract and contents page
• lists of tables and illustrative material
• any tables, diagrams, subtitles, footnotes and references which are included within the main text.

Does not Count toward word count

The word count does not include;

• the title page and front cover
• any acknowledgements
• bibliographies
• end lists of references

Words presented as images

Any words presented in graphs, tables, or other graphics must be included in the word count.

Words displayed in these formats may need to be counted manually, as they will not be detected by the word count function on most word processing software.

Appendix Abuse

You must not use appendices to present matters of substance which should be included in the main body of the text.

The text must remain understandable without reference to any appendices.

3. Text and Layout

Font and size.

Dissertations should be presented using a standard font, and a font size of between 10 and 12 points.

Text must not be presented using only upper case letters.

Line Spacing

All standard text must be presented using double or one and a half line spacing.

Indented quotations and footnotes have an exception to the above rule, and may use single spacing.

For Microsoft Word this means standard dissertation text should have a spacing setting of either 2.0 or 1.5

Margins along all sides of the document (left, right, top and bottom) should not be less than 2.5cm (25mm).

For reference, the "normal" margins setting on a Microsoft Word document is 2.54cm on all sides - this is acceptable.

4. Pagination

All pages of text and appendices in your dissertation should be numbered consecutively.

Images and diagrams should also have their own consecutive numbering where possible.

5. Title Page

You must use the Leeds University Business School Dissertation / Project coversheet as your title page.

This can be downloaded from the Forms and Guidance Page

6. Table of Contents

Your dissertation document must include a contents page.

The contents page should list all main numbered chapter headings (such as 1, 2 , 3).

It is good practice to break down chapters into numbered sections, and these should also be listed on your contents page (such as 1.1, 1.2, 1.3).

Please carefully check the section above on word counts (2. indicative length) for information on which text contributes to your maximum permitted word count.

7. Acknowledgements

It is common to include a list of acknowledgements at the start of your dissertation, but you do not have to do so.

Students may wish to acknowledge the help their Supervisor provided, as well as the support of others such as family members or friends.

The Plagiarism Checker Online For Your Academic Work

Start Plagiarism Check

Editing & Proofreading for Your Research Paper

Get it proofread now

Online Printing & Binding with Free Express Delivery

Configure binding now

• Academic essay overview
• The writing process
• Structuring academic essays
• Types of academic essays
• Academic writing overview
• Sentence structure
• Academic writing process
• Improving your academic writing
• Titles and headings
• APA style overview
• APA citation & referencing
• APA structure & sections
• Citation & referencing
• Structure and sections
• APA examples overview
• Commonly used citations
• Other examples
• British English vs. American English
• Chicago style overview
• Chicago citation & referencing
• Chicago structure & sections
• Chicago style examples
• Citing sources overview
• Citation format
• Citation examples
• College essay overview
• Application
• How to write a college essay
• Types of college essays
• Commonly confused words
• Definitions
• Dissertation overview
• Dissertation structure & sections
• Dissertation writing process
• Graduate school overview
• Application & admission
• Study abroad
• Master degree
• Harvard referencing overview
• Language rules overview
• Grammatical rules & structures
• Parts of speech
• Punctuation
• Methodology overview
• Analyzing data
• Experiments
• Observations
• Inductive vs. Deductive
• Qualitative vs. Quantitative
• Types of validity
• Types of reliability
• Sampling methods
• Theories & Concepts
• Types of research studies
• Types of variables
• MLA style overview
• MLA examples
• MLA citation & referencing
• MLA structure & sections
• Plagiarism overview
• Plagiarism checker
• Types of plagiarism
• Printing production overview
• Research bias overview
• Types of research bias
• Example sections
• Types of research papers
• Research process overview
• Problem statement
• Research proposal
• Research topic
• Statistics overview
• Levels of measurment
• Frequency distribution
• Measures of central tendency
• Measures of variability
• Hypothesis testing
• Parameters & test statistics
• Types of distributions
• Correlation
• Effect size
• Hypothesis testing assumptions
• Types of ANOVAs
• Types of chi-square
• Statistical data
• Statistical models
• Spelling mistakes
• Tips overview
• Academic writing tips
• Dissertation tips
• Sources tips
• Working with sources overview
• Evaluating sources
• Finding sources
• Including sources
• Types of sources

Your Step to Success

Plagiarism Check within 10min

Printing & Binding with 3D Live Preview

Shortening An Abstract – Keep The Word Count Down

How do you like this article cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Students that aim for a doctorate or master’s degree in academia sometimes exceed the word limit while writing abstracts for their dissertations because they use too many complex phrases or wording. Attempting to reduce the abstract to a manageable length often presents many challenges, as the original context and logic can easily be lost in the process. The purpose of this article is to provide students with pointers on how to make their abstracts more concise.

Inhaltsverzeichnis

• 1 Shortening an Abstract – In a Nutshell
• 2 Definition: Shortening an abstract
• 3 Shortening an abstract: Active sentences
• 4 Shortening an abstract: Verb style
• 5 Shortening an abstract: Avoid hard to read sentences
• 6 Shortening an abstract: Detailed descriptions are unnecessary

Shortening an Abstract – In a Nutshell

• You should avoid using passive voice while composing sentences.
• Use of the noun style is not permitted.
• Keep your statements short and to the point.
• Do not use the exact words or sentences more than once.
• Omit the background info.
• Feature a summary of essentials.

Definition: Shortening an abstract

• Shortening an abstract is a brief synopsis of your research paper , whether it has been published or not, often ranging in length from one paragraph (150-250 words).
• You may have uncovered exciting facts in your study, but if your audience has to wade through the whole report to get them, they may never get to them.
• Shortening an abstract serves the purpose of giving readers an overview of your study’s issues and functions as an introduction to your work.

Shortening an abstract: Active sentences

Active voice is encouraged when shortening an abstract in your dissertation. Long sentences are the hallmark of the passive voice . If you have already prepared shortening an abstract, you may be able to save some words by switching from passive to active voice. Some say it’s the finest method for condensing and shortening an abstract. Change the order of the subject and verb such that the issue does the action. Ensure an active verb that does not need an auxiliary verb is utilized as shown in the examples below:

Shortening an abstract: Verb style

Using a noun, which causes sentences to expand, is a common cause why shortening an abstract becomes necessary. Sentences may become complicated when nouns are used excessively. Always substitute nouns with verbs in the phrases as shown below:

Shortening an abstract: Avoid hard to read sentences

Many students like to use flowery language and complicated structures in an abstract. Therefore, cutting out unnecessary words that lengthen sentences may be helpful to shortening an abstract of a dissertation.

• Avoid writing the same words or phrases multiple times
• Reread the abstract aloud once it has been completed
• It will assist you in dealing with repeated phrases and vocabulary
• Ask friends or family members in spotting the recurrence of sentences, words, or phrases
• Also use computer tools verb or sentence repetition may be detected

Shortening an abstract: Detailed descriptions are unnecessary

Too much context regarding how the subject or problem came about should be avoided. There’s no need to use more than a few phrases to summarize the dissertation’s primary issues and themes. This may be an effective method for shortening an abstract.

How long should an abstract be for a dissertation?

Typically, shortening an abstract in a thesis or dissertation entails condensing them between 150 and 300. In many cases, a hard work limit must be adhered to, so be sure to verify with your institution’s guidelines.

What exactly needs to be included in a dissertation abstract?

When shortening an abstract make sure it keeps the following included:

• Brief summary of its objectives and findings to help readers quickly grasp the significance of your work.
• While the exact format may vary from field to field, all abstracts should include a statement of the problem
• Summary of the research conducted
• Short discussion of the results.

Are questions allowed in abstracts?

Please pay close attention when shortening an abstract, to how well the it captures the essence of your study and its significance to the field as a whole. This is what shortening an abstract brings about, and whether or not you utilize a question is an issue of personal preference and feedback from your trusted advisors.

Are there times when abstracts are turned down?

In the case of shortening an abstract, no matter how well-written, it will be rejected if it is boring, irrelevant, plagiarized, or just plain crazy. Similarly, you have an uphill battle if your thoughts are sharp, innovative, and sensible. Perhaps not even the worst shorten abstract would be enough to guarantee rejection.

We use cookies on our website. Some of them are essential, while others help us to improve this website and your experience.

• External Media

Individual Privacy Preferences

Cookie Details Privacy Policy Imprint

Here you will find an overview of all cookies used. You can give your consent to whole categories or display further information and select certain cookies.

Accept all Save

Essential cookies enable basic functions and are necessary for the proper function of the website.

Show Cookie Information Hide Cookie Information

Statistics cookies collect information anonymously. This information helps us to understand how our visitors use our website.

Content from video platforms and social media platforms is blocked by default. If External Media cookies are accepted, access to those contents no longer requires manual consent.

Privacy Policy Imprint

Sophia Melo Gomes

Margurite J. Perez

Rebecca Geach

Gain efficiency with my essay writer. Hire us to write my essay for me with our best essay writing service!

Enhance your writing skills with the writers of penmypaper and avail the 20% flat discount, using the code ppfest20.

Customer Reviews